- HOME
- POLYMER SEARCH
- Polymer Property : Vicat Softening Point = 120 °C
Polymer Property : Vicat Softening Point = 120 °C Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 120 °C | 248 °F | B |
|
Plastcom SLOVALEN PQ 83 T 15 PP, 15% mineral filling, UV stabilization
FeaturesModified PP for injection moulding with the content of 15% mineral filling, uv stabilized. Increased rigidity, strength and thermal use up to 130°C depending on the talc content. Decreased ..
|
|||
| Vicat Softening Point |
120
°C @Load 5.001 kg |
248
°F @Load 11.03 lb |
50°C/h; ISO 306 |
|
Polykemi AB POLYblend 65H PC/ABS-Blend
Information provided by Polykemi AB
|
|||
| Vicat Softening Point |
120
°C @Load 1.00 kg, Thickness 4.00 mm |
248
°F @Load 2.20 lb, Thickness 0.157 in |
ISO 306 |
|
Solvay Specialty Polymers Solef® 21508 PVDF Copolymer
(discontinued **)
Key features of this grade: High Elongation, Wire & Cable, Plenum, Formulated. Recommended processing is extrusion. Available as powder & granules.General information about SOLEF® PVDF: SOLEF® P..
|
|||
| Vicat Softening Point | 120 °C | 248 °F | ASTM D1525 |
|
Ineos K38-20-160 Polyethylene Copolymer
K38-20-160 is a medium density polyethylene copolymer containing an organic yellow pigment system, designed specifically for the extrusion of natural gas pipe. It exhibits excellent long term stres..
|
|||
| Vicat Softening Point | 120 °C | 248 °F | ASTM D1525 |
|
Ineos TUB 172 HDPE
TUB 172 is a yellow medium density polyethylene copolymer designed specifically for the extrusion of natural gas pipe. It exhibits excellent long term stress life and slow crack growth resistance. T..
|
|||
| Vicat Softening Point |
120
°C @Load 5.00 kg |
248
°F @Load 11.0 lb |
50°C/h; ASTM D1525 |
|
LG Chemical XR474F ABS, Heat Resistance
Feature: Injection Molding, Heat ResistanceApplication: Automotives Exterior Housing (Lamp Housing Etc)CAS No. 25120-20-1, 9003-56-9, 31621-07-5, and 9003-54-7Information provided by LG Chemical
|
|||
| Vicat Softening Point | 120 °C | 248 °F | ASTM D1525 |
|
Iran Petrochemical (PCC) 52528 High Density Polyethylene
52528 is a HDPE copolymer injection molding grade for thin walled applications requiring a good balance between high flowability and physical properties.Application: caps, thin walled, injection mol..
|
|||
| Vicat Softening Point | 120 °C | 248 °F | Rate A/50; ISO 306 |
|
SABIC Innovative Plastics NORYL SE100 PPE+HIPS (Europe-Africa-Middle East)
NORYL® SE100 is an unfilled, flame retardant material with a Vicat B/120 of 120°C. It has a UL-94 flammability rating V1 @ 1.47 mm, and is halogen free according to VDE/DIN 472 part 815.
|
|||
| Vicat Softening Point | 120 °C | 248 °F | Rate A/50; ISO 306 |
|
SABIC Innovative Plastics NORYL V03505 PPE+HIPS
Noryl* V03505 is a 35% milled fiber reinforced, injection moldable grade. Designed for good dimensional stability and low warpage, this resin also uses non-chlorinated, non-brominated FR additives t..
|
|||
| Vicat Softening Point | 120 °C | 248 °F | Rate A/50; ISO 306 |
|
SABIC Innovative Plastics NORYL V03505 PPE+HIPS (Asia Pacific)
Noryl* V03505 is a 35% milled fiber reinforced, injection moldable grade. Designed for good dimensional stability and low warpage, this resin also uses non-chlorinated, non-brominated FR additives t..
|
|||
| Vicat Softening Point | 120 °C | 248 °F | Rate B/120; ISO 306 |
|
SABIC Innovative Plastics Xenoy® HX6600HP PBT+PC
Xenoy HX6600HP is PBT based semi-crystalline blend with balanced flow and impact properties. Improved chemical resistance against lab disinfectants and chemicals for healthcare enclosure and housing..
|
|||
| Vicat Softening Point | 120 °C | 248 °F | Rate B/50; ASTM D 1525 |
|
SABIC Innovative Plastics Xenoy® X3515 PC+POLYESTER (Asia Pacific)
Flame Retardant, Impact Modified, Opaque, Designed for outdoor telecommunication enclosure applications.This data was supplied by SABIC-IP for the Asia Pacific region.
|
|||
| Vicat Softening Point | 120 °C | 248 °F | Rate B/50; ISO 306 |
|
SABIC Innovative Plastics Xenoy® X3515 PC+POLYESTER (Europe-Africa-Middle East)
Flame Retardant, Impact Modified, Opaque, Designed for outdoor telecommunication enclosure applications.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
|
|||
| Vicat Softening Point |
120
°C @Load 5.10 kg |
248
°F @Load 11.2 lb |
50°C/h; ISO 306 |
|
Styrolution Luran® HH-120 Alpha-Methylstyrene Acrylonitrile
Luran HH-120 is a grade of AMSAN with high heat resistance and improved mechanical strength. It is suitable for injection molding and extrusion applications and can be used as a modifier for high he..
|
|||
| Vicat Softening Point | 120 °C | 248 °F | VST/A/50; ISO 306 |
|
Styrolution Luran® S KR 2858 GS Colored 15% Glass Filled ASA
Description: Glass-reinforced grade with high stiffness and heat distortion resistance.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS
|
|||
| Vicat Softening Point | 120 °C | 248 °F | B/120; ISO R306 |
|
Samsung Cheil Industries Infino® HA-1011 PC/ABS, Unreinforced
Information provided by Samsung Cheil Industries.
|
|||
| Vicat Softening Point | 120 °C | 248 °F | B/50; ISO R306 |
|
Samsung Cheil Industries Infino® WP-1098 PC/ABS, Unreinforced
Information provided by Samsung Cheil Industries.
|
|||
| Vicat Softening Point | 120 °C | 248 °F | Rate B/50; ISO 306 |
|
SABIC Innovative Plastics NORYL IN120 PPE+HIPS (Europe-Africa-Middle East)
NORYL IN120 is an unfilled material with a Vicat B/120 of 125 °C according ISO 306. NORYL IN120 has been developed for the interior automotive
|
|||
| Vicat Softening Point | <= 120 °C | <= 248 °F | |
|
Sibur Discar-SL PC/ABS Compositional Polymer
Composition material PC/ABS with low viscosity of melting with high shock resistance, thermal and atmospheric resistance for large, thin wall structural parts of automobile interiors.
|
|||
| Vicat Softening Point | 120 °C | 248 °F | ASTM-D1525 |
|
Polyram RamLloy PBB701 PC/ABS alloy, UV Stabilized
UV stabilized PC/ABS alloy for injection molding applicationsInformation provided by Polyram Ram On Ind.
|
|||
| Vicat Softening Point |
120
°C @Load 5.00 kg |
248
°F @Load 11.0 lb |
50°C/hr; ASTM D 1525 |
|
Cossa Polimeri ESTAPROP 0540 GFC V0 Flame Retardant Polypropylene, 20% Glass Filled
PP with 20% chemically coupled glass fiberFlame retardant class V0, excellent mechanical characteristics, excellent heat resistanceInformation provided by Cossa Polimeri S.r.l.
|
|||
| Vicat Softening Point |
120
°C @Load 5.10 kg |
248
°F @Load 11.2 lb |
50°C/hr; ASTM D 1525 |
|
Cossa Polimeri ESTAPROP 1540 GFC V0 H Flame Retardant Polypropylene, 20% Glass Filled
PP with 20% glass fiber reinforcedFlame retardant class UL V0 and class M2 according to NL P92-507Information provided by Cossa Polimeri S.r.l.
|
|||
| Vicat Softening Point |
120
°C @Load 5.00 kg |
248
°F @Load 11.0 lb |
50°C/hr; ASTM D 1525 |
|
Cossa Polimeri ESTAPROP H 0560 GF Polypropylene, 30% Glass Filled
PP homopolymer 30% glass fiber reinforcedGood physical and mechanical characteristicsInformation provided by Cossa Polimeri S.r.l.
|
|||
| Vicat Softening Point | 120 °C | 248 °F | Loading 1, Rate A; ASTM D-1525 |
|
Chevron Phillips Marlex® HMN TR-942/942G Polyethylene; HDPE
High density polyethylene. These hexene copolymers are tailored for rotational molding applications that require: Wide process windows and fair flowLong-term UV stabilizationExcellent impact stren..
|
|||
| Vicat Softening Point |
120
°C @Load 5.10 kg |
248
°F @Load 11.2 lb |
ISO 306 |
|
Eurotec® Tecotek® BC40 UF65 NL CE PC/ABS, unfilled, heat & UV stabilized, natural, standard grade
Information provided by Eurotec®
|
|||
| Vicat Softening Point | 120 °C | 248 °F | |
|
Arkema Group Orevac® 18732 RBP Maleic Anhydride modified Polypropylene
PP base Structure: Repairing and joint Applications: Pipe CoatingInformation provided by Arkema Group
|
|||
| Vicat Softening Point | 120 °C | 248 °F | ASTM D1525 |
|
C.O.I.M. LARIPUR® LPR5850 Modified Ester Polyurethane
Description: The products of the LARIPUR® line are thermoplastic polyurethanes. These products combine the technology of thermoplastic products with the features of polyurethanes:Excellent abrasion..
|
|||
| Vicat Softening Point |
120
°C @Load 5.10 kg |
248
°F @Load 11.2 lb |
ISO 306 |
|
Azoty Tarnow™ Tarnamid® T-27 MTR Polyamide 6 - Transparent
Medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Transparent up to maximum 2.5 mm.Tarnamid® has the following main properties..
|
|||
| Vicat Softening Point | 120 °C | 248 °F | Method B; ASTM D-1525 |
|
Bhansali Engineering Abstron IMGS20 Glass Reinforced Grade
Glass Reinforced ABS & SAN Resins for product specific requirement of very high rigidity and temperatureInformation provided by Bhansali
|
|||
| Vicat Softening Point | 120 °C | 248 °F | VST/B/50; ISO 306 |
|
Styrolution Luran® S KR 2861/1 C Colored ASA+PC
Description: Grade with high heat resistance for injection molding and extrusion.Applications: Interior and exterior automotive parts, and electrical housings.Information provided by STYROLUTION, wh..
|
|||
Copyright © lookpolymers.com All Rights Reserved