- HOME
- POLYMER SEARCH
- Polymer Property : Vicat Softening Point = 200 °C
Polymer Property : Vicat Softening Point = 200 °C Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 200 °C | 392 °F | STN EN ISO 306 |
|
Plastcom PLASTAMID® 6 GF 30 002 TS PA6 reinforced with glass fiber, heat stabilized
PA 6 for injection molding, reinforced with 30% glass fiber, heat stabilized. Decrease in tensile strength by 50 % after 5000 hours at 170°C. Used for holders of hand tools, hobby tools, gear wheel..
|
|||
| Vicat Softening Point | 200 °C | 392 °F | STN EN ISO 306 |
|
Plastcom PLASTAMID® 6 GF 30 031 TS PA6 reinforced with glass fiber, heat stabilized
PA 6 for injection molding, reinforced with 30% glass fiber, heat stabilized, better surface appearance of injection moldings. Decrease in tensile strength by 50 % after 5000 hours at 170°C. Used f..
|
|||
| Vicat Softening Point | 200 °C | 392 °F | B |
|
Plastcom SLOVAMID 6 FRM1X3 PA6, flame retardant
FeaturesDetermined for electrotechnical use. Delivered in natural mode. PA 6 for injection moulding with reduced flammability, with nonhalogen flame retardant. Excellent fluidity of the material pre..
|
|||
| Vicat Softening Point | 200 °C | 392 °F | B; STN EN ISO 306 |
|
Plastcom SLOVAMID 6 GF 15 Polyamide 6, 15% Glass Fiber
FeaturesPA 6 for injection moulding, chemically reinforced with 15% glass fiber. Application: impacted mouldings and mouldings with high strength applied in automotive, electrical, engineering and ..
|
|||
| Vicat Softening Point | 200 °C | 392 °F | B |
|
Plastcom SLOVASTER® B PBT, basic type
FeaturesPBT basic type for injection molding. Melt is characterised by outstanding fluidity, which enables injection molding of complicated and divided products also on multiple molds. Anisotropy of..
|
|||
| Vicat Softening Point |
200
°C @Load 5.001 kg |
392
°F @Load 11.03 lb |
50°C/h; ISO 306 |
|
Polykemi AB SCANMID 6 B11^ FC Nylon 6
Information provided by Polykemi AB
|
|||
| Vicat Softening Point |
>=
200
°C @Load 5.001 kg |
>=
392
°F @Load 11.03 lb |
50°C/h; ISO 306 |
|
Polykemi AB SCANMID 6 B32^ E F30 Nylon 6, Glass Fiber Reinforced, Modified
Information provided by Polykemi AB
|
|||
| Vicat Softening Point | 200 - 260 °C | 392 - 500 °F | Average value: 248 °C Grade Count:15 |
|
Overview of materials for Nylon 66, 10% Carbon Fiber Filled
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 10% Carbon Fiber Filled". Specific grades with carbon fiber content between 5% and 14% are inc..
|
|||
| Vicat Softening Point | >= 200 °C | >= 392 °F | 50N; ISO 306 |
|
Grupo Repol Dinalon® B1V25 PA6 Unreinforced
Mechanical properties for Dry As Molded samplesInformation provided by Grupo Repol
|
|||
| Vicat Softening Point | 200 °C | 392 °F | 50°C/h 50N; ISO 306 |
|
Lanxess Durethan® BKV 15 000000 Copolyamide, 15% Glass Fiber
CoPA, injection molding grade, 15% glass fibers
|
|||
| Vicat Softening Point | 200 °C | 392 °F | 50°C/h 50N; ISO 306 |
|
Lanxess Durethan® BKV 15 H2.0 901510 Copolyamide, 15% Glass Fiber
CoPA, injection molding grade, 15% glass fibers, good heat-ageing resistance
|
|||
| Vicat Softening Point | 200 °C | 392 °F | 50°C/h 50N; ISO 306 |
|
Lanxess Durethan® BKV 30 000000 Nylon 6, 30% Glass Fiber
30% Glass fiber reinforced; injection molding grade
|
|||
| Vicat Softening Point |
>=
200
°C @Load 5.10 kg |
>=
392
°F @Load 11.2 lb |
120°C/hour; ISO 306 |
|
Lanxess Durethan® BKV 50 000000 Nylon 6, Glass Fiber Reinforced
PA 6, 50% glass fibers, injection moldingInformation provided by LANXESS.
|
|||
| Vicat Softening Point | >= 200 °C | >= 392 °F | 50N; ISO 306 |
|
Grupo Repol Dinalon® B3S25 PA6 Unreinforced
Mechanical properties for Dry As Molded samplesInformation provided by Grupo Repol
|
|||
| Vicat Softening Point | 200 °C | 392 °F | 50°C/h 50N; ISO 306 |
|
Lanxess Durethan® BKV 30 H2.0 901510 Nylon 6, 30% Glass Fiber
PA 6, injection molding grade, 30% glass fibers, good heat-ageing resistanceApplication Examples: pedal brackets, automotive front end structures
|
|||
| Vicat Softening Point | 200 °C | 392 °F | Rate B/120; ISO 306 |
|
SABIC Innovative Plastics Valox® IQNH4550 PBT (Asia Pacific)
Valox* iQNH4550 resin is a non-brominated/non-chlorinated flame retardant product based on an environmentally sustainable Valox iQ* PBT resin. Post-consumer recycle (PCR) usage is 31% based on EPEAT..
|
|||
| Vicat Softening Point | 200 °C | 392 °F | Rate B/50; ASTM D1525 |
|
SABIC Innovative Plastics Valox® IQNH4550 PBT (Asia Pacific)
Valox* iQNH4550 resin is a non-brominated/non-chlorinated flame retardant product based on an environmentally sustainable Valox iQ* PBT resin. Post-consumer recycle (PCR) usage is 31% based on EPEAT..
|
|||
| Vicat Softening Point | 200 °C | 392 °F | Rate B/120; ISO 306 |
|
SABIC Innovative Plastics Valox® SHF434HR PBT
PBT, Super High Flow, 20% glass reinforced,hydrolytically resistant.
|
|||
| Vicat Softening Point | 200 °C | 392 °F | Rate B/50; ISO 306 |
|
SABIC Innovative Plastics Valox® SHF436HR PBT (Asia Pacific)
PBT, Super High Flow, 30% glass reinforced,hydrolytically resistant.
|
|||
| Vicat Softening Point | 200 °C | 392 °F | Rate B/120; ISO 306 |
|
SABIC Innovative Plastics NORYL GTX GTX963 PPE+PA (Europe-Africa-Middle East)
NORYL GTX963 is an unfilled impact modified material with excellent heat properties and good processability.
|
|||
| Vicat Softening Point | 200 °C | 392 °F | Rate B/120; ISO 306 |
|
SABIC Innovative Plastics NORYL GTX GTX973 PPE+PA (Asia Pacific)
NORYL GTX973 is a material especially designed for electrostatic painting and powder coating applications. The material combines high heat resistance with impact and conductivity in a unique way.
|
|||
| Vicat Softening Point | 200 °C | 392 °F | Rate B/120; ISO 306 |
|
SABIC Innovative Plastics NORYL GTX GTX975 PPE+PA (Europe-Africa-Middle East)
NORYL GTX975 is a 18% mineral filled material especially designed for in- or on-line painted exterior automotive trim part, e.g. tankflaps and corner panels. This material combines high stiffness an..
|
|||
| Vicat Softening Point | 200 °C | 392 °F | Rate B/120; ISO 306 |
|
SABIC Innovative Plastics Noryl GTX GTX977 PPE+PA66 (Asia Pacific)
Noryl GTX GTX977 resin is a mineral reinforced conductive Noryl GTX with a improved CTE (7) with a balanced performance of Impact and stiffness. (developmental grade : EXNX0074)This data was supplie..
|
|||
| Vicat Softening Point | 200 °C | 392 °F | Rate B/120; ISO 306 |
|
SABIC Innovative Plastics NORYL GTX GTX985 PPE+PA66
NORYL GTX985 is a 18% mineral filled material. This material combines high stiffness and excellent temperature resistance with conductivity for electrostatic painting.
|
|||
| Vicat Softening Point | 200 °C | 392 °F | ASTM D1525 |
|
Tipco Tipcofil® AG 200 - 10% Glass Fiber Reinforced Nylon-6 Compound, with High Heat Stability
10% Glass Reinforced Nylon-6 CompoundApplications: General PurposeProcessing: Injection MoldingInformation provided by the Manufacturer, Tipco Industries Ltd.,
India.
|
|||
| Vicat Softening Point | 200 °C | 392 °F | 50 N; ISO 306 |
|
CP-Polymer-Technik Wellamid® 6000 MX 400 CP Combination Nylon 6, Heat Stabilized, Dry
Information provided by CP-Polymer-Technik GmbH & Co. KG
|
|||
| Vicat Softening Point | 200 °C | 392 °F | 50 N; ISO 306 |
|
CP-Polymer-Technik Wellamid® 6000 CF 18 HWCP 18% Carbon Fiber Nylon 6, Heat Stabilized, Dry
Information provided by CP-Polymer-Technik GmbH & Co. KG
|
|||
| Vicat Softening Point | 200 °C | 392 °F | 50 N; ISO 306 |
|
CP-Polymer-Technik Wellamid® 6000 GS 30 HWCP 30% Glass Sphere Filled Nylon 6, Heat Stabilized, Dry
Information provided by CP-Polymer-Technik GmbH & Co. KG
|
|||
| Vicat Softening Point |
200
°C @Load 5.10 kg |
392
°F @Load 11.2 lb |
ISO 306 |
|
Azoty Tarnow™ Tarnamid® T-27 MCS Polyamide 6 - Colored
Medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.For colored parts produced by injection molding.Tarnamid® has the following ..
|
|||
| Vicat Softening Point | 200 °C | 392 °F | B; STN EN ISO 306 |
|
Plastcom SLOVASTER® B GF 20 FRL 4 Polybutylene Terephthalate, 20% Chemically Coupled Glass Fiber, Bromine Hydrocarbon Flame Retardant
FeaturesPBT with the content of 20% chemically coupled glass fiber and flame retardant based on bromine hydrocarbons. Anisotropy of shrinkage enables injection moulding of round, cylindrical or oth..
|
|||
Copyright © lookpolymers.com All Rights Reserved