- HOME
- POLYMER SEARCH
- Polymer Property : Vicat Softening Point = 491 °F
Polymer Property : Vicat Softening Point = 491 °F Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 255 °C | 491 °F | B |
|
Plastcom SLOVAMID 66 GF 14 HI TS PA66, 14% glass fibre, improved strength
FeaturesChemically reinforced with 14% glass fibre, suitable for mouldings with high strength and toughness also at minus temperatures. Used in the automotive, engineering and electrical industry. I..
|
|||
| Vicat Softening Point | 255 °C | 491 °F | 9.8 N; ISO 306, ASTM D1525 |
|
Nilit Nilamid A G5 FR PH1 25% Glass Fiber Reinforced, Flame Retardant PA66
Description: Nilamid A G5 FR PH1 combines flame retardancy with outstanding mechanical performance. This product has a complete yellow card, with RTI and CTI listings. The formulation has been optim..
|
|||
| Vicat Softening Point | 255 °C | 491 °F | 9.8 N; ASTM D1525 |
|
Nilit Polynil® P40 Low Viscosity Nylon 66
Description: Low viscosityApplication: CompoundingInformation provided by NILIT.
|
|||
| Vicat Softening Point | 255 °C | 491 °F | 9.8 N; ASTM D1525 |
|
Nilit Polynil® P50 Standard Viscosity Nylon 66
Description: Standard viscosityApplication: CompoundingInformation provided by NILIT.
|
|||
| Vicat Softening Point | 255 °C | 491 °F | 9.8 N; ISO 306, ASTM D1525 |
|
Nilit Nilamid A3 H G6 General Purpose 30% Glass Reinforced PA66
Description: Nilamid A3 H G6 is a general purpose 30% glass fiber reinforced NYLON 66 that gives an excellent combination of tensile strength, stiffness and impact strength. It is one of the most wi..
|
|||
| Vicat Softening Point | 255 °C | 491 °F | 9.8 N; ISO 306, ASTM D1525 |
|
Nilit Nilamid A3 H6 G6 30% Glass Reinforced PA66
Description: Nilamid A3 H6 G6 is a 30% glass fiber reinforced NYLON 66 with a special stabilization system against hot oil and grease. As a result of this stabilization, the material has a brown nat..
|
|||
| Vicat Softening Point | 255 °C | 491 °F | 9.8 N; ISO 306, ASTM D1525 |
|
Nilit Nilamid A3 N H2 Nucleated, Heat Stabilized Nylon 66
Description: Nilamid A3 N H2 is a nucleated, heat stabilized NYLON 66 with excellent flow characteristics and very fast cycle time. It is widely used throughout many industries for mass production a..
|
|||
| Vicat Softening Point | 255 °C | 491 °F | A/10N; ISO 306 |
|
Idemitsu Kosan Xarec® EA 528 SPS, 30% Glass Filled
(discontinued **)
Crystalline Polymer, Glass Filled, Ignition Resistant, Impact Modified. Used in Electronic and Electrical applications
|
|||
| Vicat Softening Point | 255 - 260 °C | 491 - 500 °F | Average value: 257 °C Grade Count:3 |
|
Overview of materials for Polyphenylene Sulfide (PPS), PTFE/Glass-Fiber Filled
This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Sulfide (PPS), PTFE/Glass-Fiber Filled". Each property range of values reported is minimum..
|
|||
| Vicat Softening Point |
255
°C <br>@Load 5.00 kg
|
491
°F <br>@Load 11.0 lb
|
|
|
LATI Larton K/20 PPS, 20% Carbon Fiber Reinforced
Polyphenylene Sulfide (PPS) based compound. Carbon fiber. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.Availability: Africa & Middle East; As..
|
|||
| Vicat Softening Point |
255
°C <br>@Load 5.00 kg
|
491
°F <br>@Load 11.0 lb
|
|
|
LATI Latamid 66 H2 G/35-V0KB1 PA 66, 35% Glass Fiber Reinforced, Heat Stabilized, Flame Retardant
Polyamide 66 (PA66) based compound. Heat stabilized. Glass fibers. UL94 V-0 classified, with red phosphorous. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaIn..
|
|||
| Vicat Softening Point |
255
°C <br>@Load 5.00 kg
|
491
°F <br>@Load 11.0 lb
|
|
|
LATI Latamid 66 H2 G/50-GWHF1 PA 66, 50% Glass Fiber Reinforced, Heat Stabilized
Polyamide 66 (PA66) based compound. Heat stabilized. Glass fibers. improved G.W.F.I. compared to standard product.Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North Ameri..
|
|||
| Vicat Softening Point | 255 °C | 491 °F | DIN ISO 306 |
|
Lehmann & Voss LUVOCOM® 1/CF/30/TF/13/SI/2/BK Polyamide 66, with carbon fiber, PTFE, lubricant modified, heat stabilized
Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.High-strength and high-stiff parts; low coefficient of expansion.Improved friction and wear beh..
|
|||
| Vicat Softening Point | 255 °C | 491 °F | DIN ISO 306 |
|
Lehmann & Voss LUVOCOM® 1/CF/40 Polyamide 66, with carbon fiber, heat stabilized
Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.High-strength and high-stiff parts; low coefficient of expansion.Reduced moment of inertia comp..
|
|||
| Vicat Softening Point |
255
°C <br>@Load 5.00 kg
|
491
°F <br>@Load 11.0 lb
|
|
|
LATI Latiohm 80-04 PD01 G/30 PPS, 30% Glass Fiber Reinforced
Semiconductive/dissipative product based on Polyphenylene Sulfide (PPS). Glass fibers. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by..
|
|||
| Vicat Softening Point |
255
°C <br>@Load 5.00 kg
|
491
°F <br>@Load 11.0 lb
|
|
|
LATI Latiohm 80-05 CNT GCE/500 PPS, Glass/Mineral Reinforced
Semiconductive/dissipative product based on Polyphenylene Sulfide (PPS). Carbon nanotubes. Glass fibers / Mineral filler. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; No..
|
|||
| Vicat Softening Point | 255 °C | 491 °F | B/120; ISO 306 |
|
Sax Polymers SAXAMID 226F10 Nylon 6.6, 50% Glass Fiber
SAXAMID 226F10 is a polyamide 6.6 injection-molding-grade reinforced with 50% glass fibers. It has high mechanical strength.Information provided by SAX Polymers
|
|||
| Vicat Softening Point | 255 °C | 491 °F | B/120; ISO 306 |
|
Sax Polymers SAXAMID 226F6 Nylon 6.6, 30% Glass Fiber
SAXAMID 226F6 is a general purpose polyamide 6.6 injection-molding-grade reinforced with 30% glass fibers. It has very high mechanical strength in combination with good flow properties. It shows hig..
|
|||
| Vicat Softening Point | 255 °C | 491 °F | Rate B/120; ISO 306 |
|
SABIC Innovative Plastics LNP THERMOCOMP RC003 PA 66 (Europe-Africa-Middle East)
15% carbon fibre reinforced Polyamide 66 injection moulding resin.
|
|||
| Vicat Softening Point | 255 °C | 491 °F | Rate B/120; ISO 306 |
|
SABIC Innovative Plastics LNP THERMOCOMP RC003SXS PA 66 (Europe-Africa-Middle East)
LNP* THERMOCOMP* RC003SXS is a compound based on PA 66 resin containing Carbon fiber. Added features include: Electrically Conductive, Heat Stabilized
|
|||
| Vicat Softening Point | 255 °C | 491 °F | ISO 306 |
|
Tisan TISLAMID® 66 20% Glass Fiber Reinforced Nylon 66
TISLAMID has a wide area of application in electric/electronic, automotive, durable goods and telecommunications industries. It demonstrates characteristics such as Excellent chemical resistanceElec..
|
|||
| Vicat Softening Point | 255 °C | 491 °F | ISO 306 |
|
Tisan TISLAMID® 66 25% Glass Fiber Reinforced Flame Retardant (V0). Heat Stabilized Nylon 66
TISLAMID has a wide area of application in electric/electronic, automotive, durable goods and telecommunications industries. It demonstrates characteristics such as Excellent chemical resistanceElec..
|
|||
| Vicat Softening Point | 255 °C | 491 °F | ISO 306 |
|
Tisan TISLAMID® 66 25% Glass Fiber Reinforced Nylon 66
TISLAMID has a wide area of application in electric/electronic, automotive, durable goods and telecommunications industries. It demonstrates characteristics such as Excellent chemical resistanceElec..
|
|||
| Vicat Softening Point | 255 °C | 491 °F | ISO 306 |
|
Tisan TISLAMID® 66 30% Glass Fiber Reinforced Nylon 66
TISLAMID has a wide area of application in electric/electronic, automotive, durable goods and telecommunications industries. It demonstrates characteristics such as Excellent chemical resistanceElec..
|
|||
| Vicat Softening Point | 255 °C | 491 °F | DAM; 50°C/h 50N; ISO 306 |
|
DuPont Performance Polymers Zytel® FG70G50HSLA BK309 Nylon 66
(Unverified Data**)
50% Glass Reinforced Heat Stabilized Polyamide 66 with Developed for Food Contact Applications Information provided by DuPont Performance Polymers
|
|||
| Vicat Softening Point | 255 °C | 491 °F | B/120; ISO 306 |
|
Eurostar Staramide AG4 PA66, 20% Glass Filled, Injection Molded
AG4 is a 20% Glass Fiber Reinforced Polyamide 66 Injection Molding ResinInformation provided by Polymer Technology & Services, the North American exclusive supplier.
|
|||
| Vicat Softening Point | 255 °C | 491 °F | B/120; ISO 306 |
|
Eurostar Staramide AG5K PA66, 25% Glass Filled, Injection Molded
AG5 is a Heat and Hydrolytically Stabilized, 25% Glass Fiber Reinforced Polyamide 66 Injection Molding ResinInformation provided by Polymer Technology & Services, the North American exclusive suppli..
|
|||
| Vicat Softening Point | 255 °C | 491 °F | B/120; ISO 306 |
|
Eurostar Staramide AK6 PA66, 30% Mineral Reinforced, Injection Molding
Staramide AK6 is a 30% Mineral Filled Polyamide 66, Injection Molding ResinInformation provided by Eurostar.
|
|||
| Vicat Softening Point | 255 °C | 491 °F | B/120; ISO 306 |
|
Eurostar Staramide RF006XXP PA66, 30% Glass Fiber Filled, Injection Molded
Staramide RF006XXP is a 30% Glass Fiber Reinforced Polyamide 66 Injection Molding Resin (also known as RF1006)Information provided by Eurostar.
|
|||
| Vicat Softening Point |
255
°C <br>@Load 5.10 kg
|
491
°F <br>@Load 11.2 lb
|
ISO 306 |
|
Eurotec® Tecomid® NA40 GR35 NL HS PA6.6, 35% glass fiber reinforced, heat stabilized, natural
Information provided by Eurotec®
|
|||
Copyright © lookpolymers.com All Rights Reserved