- HOME
- POLYMER SEARCH
- Polymer Property : Minimum Service Temperature, Air = -22.0 °F
Polymer Property : Minimum Service Temperature, Air = -22.0 °F Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
|
Murtfeldt Murlubric® [FS] Oil Modified Nylon 6
Murlubric® is a modified cast polyamide that mineral oil is integrated into during polymerization. As a result, the material has self lubricating properties and retains its excellent characteristi..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
|
Murtfeldt Murylon® A Nylon 66
This material combines the excellent properties of the Murylon® range with additional high tensile and compressive strength, increased wear resistance, and a lower level of moisture absorption than..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Recommended |
|
Nye Lubricants 176F (SO) Synthetic Oil
Information provided by Nye Lubricants.
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Recommended |
|
Nye Lubricants 176H (SO) Synthetic Oil
Information provided by Nye Lubricants.
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Recommended |
|
Nye Lubricants 782LC (NG) Synthetic Oil
Information provided by Nye Lubricants.
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Recommended |
|
Nye Lubricants PML-S-BLUE Grease
Information provided by Nye Lubricants.
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
|
Precision Polymer Engineering N90E Nitrile Rubber
High Nitrile Rubber, 85-95 °IRHD. High acrylonitrile (ACN) content. Copolymer of acrylonitrile and butadiene. ASTM designation = NBR. ISO designation = NBR. Aerospace Material Specification DTD5509..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
|
Precision Polymer Engineering N90K Nitrile Rubber
Peroxide cured Nitrile Rubber, 85-95 °IRHD. Copolymer of acrylonitrile and butadiene. ASTM designation = NBR. ISO designation = NBR. ASTM D2000/SAE J200 line call-out M7BG910, B14, EA14, EF11, EF21..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Non-brittle after 3 minutes |
|
Precision Polymer Engineering N90L Nitrile Rubber
Low Nitrile Rubber, 85-95 °IRHD. Low acrylonitrile (ACN) content. Copolymer of acrylonitrile and butadiene. ASTM designation = NBR. ISO designation = NBR. ASTM D2000 line call-out M6BG907, A14, B..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
|
Radici Heraflex® P 40D 21 I HF Modified Polypropylene
Shore hardness: 40D (3s)Shiny surface, very flexible even at very low T°C (to -30°C), good resistance to weather conditions, very light and recyclableApplication examples: low price, boots interna..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Recommended |
|
Nye Lubricants 786A (RL) Synthetic Oil
Information provided by Nye Lubricants.
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Non-brittle after 3 minutes |
|
Precision Polymer Engineering C90B Chloroprene Rubber
Chloroprene Rubber, 86-95 °IRHD. To meet British Standard BS5176 line call-out M2BC907.Applications: A versatile rubber with good compression set properties, giving moderate resistance to petroleu..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
|
GEHR Plastics PVDF-ELS Polyvinylidene Fluoride, Electrically Conductive
Polyvinylidene fluoride shows a higher tensile strength, pressure resistance and dimensional stability than the related PTFE, but friction and insulation properties are lower. PVDF has a high mechan..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Recommended Operating Temperature |
|
Unifrax Excelfrax® 200 VIP Vacuum Insulation Panel
Excelfrax® 200 VIP is a Vaccum Insulation Panel (VIP) designed to provide insulation at temperatures between -300°F and +300°F. This thermal insulation provides extremely low thermal conductivit..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Gehman T100 |
|
Zeon Chemicals HyTemp® 4065 AR Polyacrylate Elastomer
HyTemp 4065 contains acrylic esters with a small percentage of a chlorine/carboxy cure site monomer. Vulcanizates have excellent oil, heat, and compression set resistance with good low temperature.E..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | Gehman T100 |
|
Zeon Chemicals HyTemp® PV-04 AR Polyacrylate Elastomer
HyTemp PV-04 contains one or more acrylic esters. This polymer is specific to the peroxide vulcanized cure system.Peroxide curable elastomer suitable for O-rings, seals, and gaskets. Also used for b..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
|
Trelleborg Commercial Neoprene® C653 Chloroprene
CR or Chloroprene is a homopolymer of chloroprene or chlorobutadiene. NEOPRENE®PropertiesExcellent mechanical and abrasion properties even without reinforcing fillers.Reasonable resilience in grade..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
|
Trelleborg Neoprene® C329 Chloroprene
CR or Chloroprene is a homopolymer of chloroprene or chlorobutadiene. NEOPRENE®PropertiesExcellent mechanical and abrasion properties even without reinforcing fillers.Reasonable resilience in grade..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
|
Dow Corning MOLYKOTE® G-1001
Multipurpose bearing grease based on a blend of mineral and synthetic oilsInformation provided by Dow Corning
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
|
Elastron® D SEBS Elastomer
Characteristicswide hardness rangedoes not require vulcanisation-quite higher saving on the processing costsremains flexible at low temperatureselectrical insulator with very low conductivityhas gra..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | ASTM D 3575 |
|
Eurofoam Evacell EVA 50/S EVA + NR Foam
Foamed polyethylene charged with EVA, with extremely fine cells, excellent elasticity, resilience and mechanical resistance. It can be thermoformed several times. It has completely closed cells, di..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
|
Bond Laminates TEPEX® dynalite 201-C200(x)/45% Carbon – PA6.6 Consolidated Composite Laminate
Within the TEPEX® composite laminate, Polyamide 66 is a resin known for its high hardness, stiffness, abrasion resistance, heat and chemical resistances. The carbon used within this material is ae..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
|
CENTROPLAST CENTROMID 6 G Polyamide 6 Cast
This material has good machinability and can be bonded or welded. Its applications include sliding bearings, hammerheads, and toothed gears.Information provided by CENTROPLAST Engineering Plastics ..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
|
ATG s.r.l. IIR Butyl Rubber |
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
|
CENTROPLAST CENTROLAB HT Polypropylene Higher Temperatures
PP-HT is a semi-crystalline plastic, with high acid and chemical resistance and mechanical strength. Due to its high resistance to temperature, PP-HT-plastics are often used in medical technology as..
|
|||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |
|
Trelleborg B644 High Quality Nitrile Rubber
Nitrile rubber or acrylonitrile-butadiene rubber is a copolymer of butadiene and acrylonitrile.PropertiesGood general resistance to oils.Good mechanical properties especially tensile strength, flexi..
|
|||
Copyright © lookpolymers.com All Rights Reserved