Polymer Property : Minimum Service Temperature, Air = -50.0 °C Product List

Thermal Properties

Tips: 30 items are displayed at most.

Thermal Properties	Metric	English	Comments
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
Resinlab® EP1285HD-12 Highly Filled, Medium Viscosity Casting Resin Resinlab™ EP1285 (Formerly Lab Product W021901 series) is a highly filled, medium viscosity black casting resin designed for applications requiring a high degree of thermal conductivity and a low C..
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F	Recommended
Nye Lubricants 380C (RL) Synthetic Oil Information provided by Nye Lubricants.
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F	Recommended
Nye Lubricants 774F-1 (NG) Synthetic Oil Information provided by Nye Lubricants.
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F	Recommended
Nye Lubricants UniFlor 8771 (UF) Synthetic Oil Information provided by Nye Lubricants.
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F	Temperature at which modulus shall not exceed 70 Mpa
Precision Polymer Engineering F80R Fluorosilicone Rubber Red Fluorosilicone, 76-85 °IRHD. Fluorosilicone rubber having methyl, vinyl and fluorine substituent groups on the polymer chain. To meet Aerospace Specification DTD5583A Grade 80.Applications:
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
Precision Polymer Engineering H60B Epichlorohydrin Peroxide Cured, Epichlorohydrin Rubber, 55-65 °IRHD. Terpolymer of epichlorohydrin, ethylene oxide and an unsaturated monomer. To ASTM D2000 line call-out: M3CH608, A25, B14, EO16, EO36, F17. AS..
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
Termopol Termoton® K4GA4070A TPE Compound, based on SEBS and Polyolefins Main Characteristics: Wide range of hardness; High strength elasticity; 100% recyclable; Easy processing by means of the traditional technologies for thermoplastic materials; Additional resistance t..
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
Termopol Termoton® V2GA1065A TPV Compound Termoton®V, TPV compounds with a dynamically cured EPDM phase closely dispersed in a polyolefin phase (PP). Main Characteristics: Wide range of hardness; High strength elasticity; 100% recyclable;..
Minimum Service Temperature, Air	<= -50.0 Â°C	<= -58.0 Â°F
Kazanorgsintez 158BK-20 Low Density Polyethylene Composite Production Method: Produced from low density polyethylene grades 15803-020 and 15813-020. Application: Designed for production of sealing coatings on industrial items.Information Provided by Kaz..
Minimum Service Temperature, Air	-50.0 Â°C	-58.0 Â°F	Retains Stretch
Freudenberg Simrit 92 AU 21100 Low Temperature Polyurethane Elastomer With the new low temperature material 92 AU 21100, Simrit has succeeded in developing a polyurethane material that is specially designed to meet the specific requirements for use at low temperatures..
Minimum Service Temperature, Air	-50.0 Â°C	-58.0 Â°F
GEHR Plastics PE-HD Polyethylene HDPE Polyethylene has a good chemical resistance against almost all acids and bases, detergents and hot water. PE has good insulation properties and is easy to weld. The operating temperature is from -50..
Minimum Service Temperature, Air	-50.0 Â°C	-58.0 Â°F
GEHR Plastics PPSU Polyphenylenesulfone Polyphenylenesulfone is an amorphous material, with improved impact and hydrolysis resistance compared to PSU. The usual operating temperature is approximately 180Â°C. The extremely high notched i..
Minimum Service Temperature, Air	-50.0 Â°C	-58.0 Â°F	Continuous; DIN 52612
Isoflon PEHD 300 High Density Polyethylene Products with excellent friction, anti-stick, abrasion and chemical inertia characteristicsVery good impact resistanceNo moisture regainProduct for the food industryInformation provided by Isoflon.
Minimum Service Temperature, Air	-50.0 Â°C	-58.0 Â°F	Continuous; DIN 52612
Isoflon POM C Polyacetal C Good optical propertiesHigh UV resistanceAbsorbs little moistureInformation provided by Isoflon.
Minimum Service Temperature, Air	-50.0 Â°C	-58.0 Â°F	Continuous useful temperature.
Momentive Performance Materials RTV6166 Clear Potting/Encapsulating Gel Two-part addition cure. Two-part addition cure RTV silicones can be cured very quickly with the use of high heat. Addition cure products have no cure by-products and can be used to unlimited depth..
Minimum Service Temperature, Air	-50.0 Â°C	-58.0 Â°F
Seals Eastern 7346 Extreme Low Temperature Service Rubber HNBR for cold temp (-50Â°C) and/or aqueous serviceInformation provided by Seals Eastern.
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
Dow Corning MOLYKOTE® G-2001 Lithium thickened bearing grease based on synthetic hydrocarbonInformation provided by Dow Corning
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
ELASTO UK Dryflex® 500500S SEBS Based Material, Unfilled Qualities, 50A Hardness, Translucent The 500-seriesis very favorable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mecha..
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
ELASTO UK Dryflex® 500900S SEBS Based Material, Unfilled Qualities, 90A Hardness, Translucent The 500-seriesis very favorable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mecha..
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
ELASTO UK Dryflex® 502400S SEBS Based Material, Unfilled Qualities, 40A Hardness, Black The 500-seriesis very favorable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mecha..
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
ELASTO UK Dryflex® 502900S SEBS Based Material, Unfilled Qualities, 90A Hardness, Black The 500-seriesis very favorable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mecha..
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
ELASTO UK Dryflex® 600900S SEBS Based Material, Filled Qualities, 90A Hardness, Natural The most significant features of the 600-series are the improved heat stability, the sound reduction and that the material enables an easy and secure pigmenting for the customer. A filled material ..
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
ELASTO UK Dryflex® 602650S SEBS Based Material, Filled Qualities, 65A Hardness, Black The most significant features of the 600-series are the improved heat stability, the sound reduction and that the material enables an easy and secure pigmenting for the customer. A filled material ..
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
ELASTO UK Dryflex® 662800S SEBS Based Material, Semi-Filled Qualities, 80A Hardness, Black The 660-series is recommended when the properties of the produced detail requires the advantages of the 500-series in combination with the 600-series. A semi-filled material can therefore combine t..
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
ELASTO UK Dryflex® 662900S SEBS Based Material, Semi-Filled Qualities, 90A Hardness, Black The 660-series is recommended when the properties of the produced detail requires the advantages of the 500-series in combination with the 600-series. A semi-filled material can therefore combine t..
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
ELASTO UK Dryflex® 600450S SEBS Based Material, Filled Qualities, 45A Hardness, Natural The most significant features of the 600-series are the improved heat stability, the sound reduction and that the material enables an easy and secure pigmenting for the customer. A filled material ..
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F	DSC
Adamas Adalon® 808 PTFE, Bronze + PEEK+ Carbon Fiber Information provided by Adamas, HPM
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
Atom Adhesives AA-DUCT 906 Epoxy Adhesive AA-DUCT 906 represents the newest technology since the introduction of electrically conductive silver compounds. This unique formulation is based on a silver coated ceramic that results in lower mat..
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
GEHR Plastics Noryl PPO  (discontinued **) PPO belongs to the group of the amorphous materials and can be used in temperatures ranging from -58 °F to +302 °F. PPO exhibits a high impact strength and a very high dimensional stability. The e..