- HOME
- POLYMER SEARCH
- Polymer Property : CTE, linear, Parallel to Flow = 90.0 µm/m-°C
Polymer Property : CTE, linear, Parallel to Flow = 90.0 µm/m-°C Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature -40.0 - 40.0 °C |
50.0
µin/in-°F @Temperature -40.0 - 104 °F |
ASTM E 831 |
|
SABIC Innovative Plastics Cycoloy® LG8002 PC+ABS (Asia Pacific)
Automotive. Low gloss, high impact and ductility at 73F and -22F. UV-stable colors.This data was supplied by SABIC-IP for the Asia Pacific region.
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature -40.0 - 40.0 °C |
50.0
µin/in-°F @Temperature -40.0 - 104 °F |
ASTM E 831 |
|
SABIC Innovative Plastics GELOY XP4020R ASA+PC (Asia Pacific)
ASA+PC may contain up to 20% post-industrial recycle. Excellent flow, weatherability, toughness and high heat for exterior uses.
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
ASTM data |
|
Americas Styrenics Styron® 489M High Impact Polystyrene
(discontinued **)
STYRON® 489M high impact polystyrene resin is a high flow resin with excellent impact. When used unmodified for the manufacture of food contact articles STYRON 489M complies with the US Food, Drug ..
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
ASTM data |
|
Americas Styrenics Styron® 613 Polystyrene
(discontinued **)
STYRON® 613 high heat, high strength general purpose polystyrene is typically used in applications requiring a clear, tough part such as office products and magnetic media enclosures. It offers goo..
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
ASTM data |
|
Americas Styrenics Styron® 678C Polystyrene
(discontinued **)
STYRON® 678C general purpose polystyrene resin is a high flow, medium strength resin with good scuff resistance. It is typically used in thin-wall or consumer electronic applications. When used unm..
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
ASTM data |
|
Americas Styrenics Styron® 685 Polystyrene
(discontinued **)
STYRON® 685 general purpose polystyrene resin is a high heat resin used in consumer electronics and housewares. It offers excellent clarity, good moldability for use in hot runner systems. When use..
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
|
|
Ineos ABS Lustran® 723-1, Extrusion Grade
(discontinued **)
Extrusion grade for refrigerator inliner.Information provided by Bayer.LANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acquires a majority shareholding under a..
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
|
|
Ineos ABS LUSTROPAK® 1020 ABS, Extrusion Grade
(discontinued **)
Extrusion grade.Applications: Food containers, blister packs.Information provided by Bayer.LANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acquires a majority ..
|
|||
| CTE, linear, Parallel to Flow | 90.0 µm/m-°C | 50.0 µin/in-°F | ISO 11359-1/-2 |
|
Lanxess Durethan® B 30 S FN40 000000 Nylon 6
PA 6, injection molding grade, non- reinforced, good flowability, easy-release, fast cycling, UL 94V-2 off 0,75 mm, GWIT 775°C bei 0,75/1,5mm
|
|||
| CTE, linear, Parallel to Flow | 90.0 µm/m-°C | 50.0 µin/in-°F | ISO 11359-1/-2 |
|
Lanxess Pocan® KU 2-7503/1 000000 PBT
PBT, non-reinforced, injection molding, extrusion, flame retardant
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 23.0 - 55.0 °C |
50.0
µin/in-°F @Temperature 73.4 - 131 °F |
ISO 11359-1, -2 |
|
Lanxess Pocan® C 1202 000000 PET + PC
PBT + PC, non-reinforced, injection molding, improved impact strength, low tendency to warp, UV-stabilizedInformation provided by LANXESS.
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
|
|
Styrolution NOVODUR® P3H-AT ABS, Injection Grade
Injection molding grade, antistatic, high gloss, improved chemical and dynamic resistance.Applications: Housings for telephones and household appliances.
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 23.0 - 60.0 °C |
50.0
µin/in-°F @Temperature 73.4 - 140 °F |
ISO 11359-2 |
|
SABIC Innovative Plastics NORYL GTX GTX924 PPE+PA (Europe-Africa-Middle East)
NORYL GTX 924 is an UV stabilized unfilled Noryl GTX grade with improved processability. Noryl GTX 924 is specially designed for wheeltrim applications.
|
|||
| CTE, linear, Parallel to Flow | 90.0 µm/m-°C | 50.0 µin/in-°F | ASTM D696 |
|
Techmer ES Plastiblend® ABS CR X BK
Availability: North AmericaForms: PelletsFeatures: Good Chemical ResistanceUses: Electrical PartsAppearance: BlackInformation provided by TP Composites, Inc.
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
|
PlastxWorld CEVIAN®-V 660SF ABS
High Flow ABSThese are typical values and are not intended for specification purposes. UL approved file No. is E47773. Information provided by PlastxWorld Inc.
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
|
|
Covestro Bayblend® T 44 Polycarbonate/ABS Blend
Easier flowing than BAYBLEND T 45 MN.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covestro.
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
|
|
Covestro Baydur® 110 FR Polyurethane
Rigid microcellular RIM polyurethane material. Fast demold times; self releasing; long flow paths possible, therefore suitable for production of large moldings. Parts are injected through only one ..
|
|||
| CTE, linear, Parallel to Flow | 90.0 µm/m-°C | 50.0 µin/in-°F | ISO 11359-1/-2 |
|
EMS-Grivory Grivory® TR 55 LX PA12/MACMI
Product description: Grilamid TR 55 LX natural is a high purity transparent thermoplastic polyamide, based on aliphatic and cycloaliphatic monomers. Grilamid TR 55 LX natural offers outstanding prop..
|
|||
| CTE, linear, Parallel to Flow | 90.0 µm/m-°C | 50.0 µin/in-°F | ISO 11359-1/-2 |
|
Covestro Makroblend® DP UT3905 Polycarbonate + PBT, Impact Grade
Developmental product(PC+PBT)-blendhigh flowimpact modifiedeasy releaseinjection molding grade Makroblend DP UT3905* offers superior flowability, good impact strength and excellent chemical resist..
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 23.0 - 55.0 °C |
50.0
µin/in-°F @Temperature 73.4 - 131 °F |
ISO 11359-1,-2 |
|
Covestro Makroblend® UT5205 PC/PBT Blend
Main characteristics:• High toughness even at low temperatures• Good chemical resistance• Good paintability• Good flowability• Low moisture intakeGrade characteristics:• Impact modified•..
|
|||
| CTE, linear, Parallel to Flow | 90.0 µm/m-°C | 50.0 µin/in-°F | ISO 11359-1/-2 |
|
EMS-Grivory Grivory® TR 90 NZ PAMACM12-I
Product description: Grilamid TR grades are transparent thermoplastic polyamides based on aliphatic and cycloaliphatic blocks. Grilamid TR 90 NZ offers a variety of interesting properties such as: o..
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
|
|
Arkema Group Rilsan® AMN Y TLD Nylon 12, MoS2 Filled (Conditioned)
Designation ISO 1874-PA12,MHLS,14-010,MD05Grade with molybdenum filler for injection molding. Available color: steel gray. Light and heat stabilized. Mold-release agent.Low friction coefficient. Goo..
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
|
|
Arkema Group Rilsan® 6733 Nylon 11, Flexible Tubing Grade (Conditioned)
Designation ISO 1874-PA11/xx,E,18-002Transparent and flexible copolymer for tubes extrusion. Additive free.High flexibility. Very good transparency. High chemical resistance.USP XXIII class VI appro..
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
|
|
Polimeri Europa SINKRAL L320/G ABS, Platable Grade
(discontinued **)
Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,095-25-16-20 Injection moulding grade, tailored for electroplating. It is a high flow grade with a good impact ..
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 23.0 - 55.0 °C |
50.0
µin/in-°F @Temperature 73.4 - 131 °F |
ISO 11359-1, -2 |
|
Lanxess Pocan® C 1206 000000 PET + PC
PET + PC, non-reinforced, injection molding, improved impact strengthInformation provided by LANXESS.
|
|||
| CTE, linear, Parallel to Flow | 90.0 µm/m-°C | 50.0 µin/in-°F | ISO 11359-1/-2 |
|
DSM Arnite® T06 204 XL PBT
Low Viscosity, Injection Molding, Low outgassing
|
|||
| CTE, linear, Parallel to Flow |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
|
|
Polimeri Europa SINKRAL C443 ABS, Heat Stabilized
(discontinued **)
Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,105-08-25-20 Medium heat injection moulding grade. The availability of different industrial processes to manufa..
|
|||
Copyright © lookpolymers.com All Rights Reserved