- HOME
- POLYMER SEARCH
- Polymer Property : Melting Point = 221 °C
Polymer Property : Melting Point = 221 °C Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 221 °C | 430 °F | ASTM D789 |
|
NYCOA 436 PA 6
NSF rated general purpose molding gradeInformation provided by NYCOA, Inc.
|
|||
| Melting Point | 221 °C | 430 °F | Masterbatch; ISO 11357-1,-3 |
|
Nanocyl PLASTICYL™ PA1503 Polyamide 6 with 1 wt% of Multi-Wall Carbon Nanotubes
PLASTICYL™ is a family of Multi-Wall Carbon Nanotube (MWNT) thermoplastic concentrates for applications requiring superior electrical conductivity and electrostatic discharge (ESD) properties. PLA..
|
|||
| Melting Point | 221 °C | 430 °F | ISO 3146 DSC |
|
Nilit FRIANYL B63 FK 1020 Nylon 6 for injection molding, 10% glass fiber and 20% glass ball reinforced
Nylon 6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics
|
|||
| Melting Point | 221 °C | 430 °F | ISO 3146 DSC |
|
Nilit FRIANYL B63 H-GV25 Nylon 6 for injection molding, 25% glass fiber reinforced
Nylon 6 for injection molding, heat stabilized (dark natural color).Information provided by Frisetta Polymer, which merged into Nilit Plastics
|
|||
| Melting Point | 221 °C | 430 °F | ISO 3146 DSC |
|
Nilit FRIANYL B63 H-GV30 Nylon 6 for injection molding, 30% glass fiber reinforced
Nylon 6 for injection molding, heat stabilized.Information provided by Frisetta Polymer, which merged into Nilit Plastics
|
|||
| Melting Point | 221 °C | 430 °F | ISO 3146 DSC |
|
Nilit FRIANYL B63 H-GV35 Nylon 6 for injection molding, 35% glass fiber reinforced
Nylon 6 for injection molding, heat stabilized (dark natural color).Information provided by Frisetta Polymer, which merged into Nilit Plastics
|
|||
| Melting Point | 221 °C | 430 °F | ISO 3146 DSC |
|
Nilit FRIANYL B63 HH-GV35 Nylon 6 for injection molding, 35% glass fiber reinforced
Nylon 6 for injection molding, heat and hydrolysis stabilized.Information provided by Frisetta Polymer, which merged into Nilit Plastics
|
|||
| Melting Point | 221 °C | 430 °F | ISO 3146 DSC |
|
Nilit FRIANYL B63 SG30 Nylon 6 for injection molding, 30% mineral filled
Nylon 6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics
|
|||
| Melting Point | 221 °C | 430 °F | ISO 3146 DSC |
|
Nilit FRIANYL B63 W-GV25 Nylon 6 for injection molding, 25% glass fiber reinforced
Nylon 6 for injection molding, heat stabilized.Information provided by Frisetta Polymer, which merged into Nilit Plastics
|
|||
| Melting Point | 221 °C | 430 °F | ISO 3146 DSC |
|
Nilit FRIANYL B63 W-KV30 Nylon 6 for injection molding, 30% glass ball reinforced
Nylon 6 for injection molding, heat stabilized.Information provided by Frisetta Polymer, which merged into Nilit Plastics
|
|||
| Melting Point | 221 °C | 430 °F | 10°C/min; DAM; ISO 11357-1/-3 |
|
DuPont Performance Polymers Zytel® EFE7374 BK416 Nylon 6
(Unverified Data**)
Zytel® EFE7374 is a 40% fiber reinforced, heat stabilized, lubricated, toughened polyamide 6 for injection molding. It has an improved impact resistance and excellent surface appearance and gloss.I..
|
|||
| Melting Point | 221 - 235 °C | 430 - 455 °F | |
|
Johnson Matthey Mattisol B Soft Solder/Flux
General information on the Johnson Matthey soft solder and flux product line: A wide range of Tin/Lead solders suitable for a variety of applications is available from Johnson Matthey. Most materi..
|
|||
| Melting Point | 221 °C | 430 °F | 10°C/min; ISO 11357-1/-3 |
|
Lanxess Durethan® BM 40 X H2.0 DUS009 901510 Nylon 6, 40% Glass Fiber + Mineral
PA 6, injection molding grade, 40% glass fibers/mineral, good heat-ageing resistance
|
|||
| Melting Point | 221 °C | 430 °F | 10°C/min; ISO 11357-1/-3 |
|
DSM Arnitel® PL650 Polyether Ester Elastomer (European and Asian Grade)
Product description: Arnitel® combines the advantages of engineering thermoplastics, being easy to process with excellent mechanical properties, at the same time with the flexibility of rubbers.Arn..
|
|||
| Melting Point | 221 °C | 430 °F | ASTM DSC |
|
Cresset Powers Cress-Alon™ NF3040 4% Nano Clay Loaded, 3.0 r.v. Film Grade Nylon 6, 50% RH
Low density, high rigidity, high heat distortion temperature, high retention of mechanical properties under humid conditions, flame retardant, recyclable and environmentally friendly, less glass fib..
|
|||
| Melting Point | <= 221 °C | <= 430 °F | Peak Melting Point; ExxonMobil method |
|
ExxonMobil LDPE LD 250 Low Density Polyethylene Resin (European Grade)
Product Description: LD 250 is an LDPE extrusion coating grade, especially designed for low speed extrusion coating applications providingvery low neck-in characteristicsgood heat sealing properties..
|
|||
| Melting Point | <= 221 °C | <= 430 °F | Peak Melting Point; ExxonMobil method |
|
ExxonMobil LDPE LD 251 Low Density Polyethylene Resin (European Grade)
Product Description: LD 251 is an LDPE extrusion coating grade, offering:low neck-in excellent heat sealablity (ie high seal speeds and/or seal temperatures mostly required in high speed form-fill a..
|
|||
| Melting Point | 221 °C | 430 °F | |
|
Domo Domamid® 24 T Polyamide 6
DOMAMID® 24 T are a low viscous Polyamide 6 pellets produced from Caprolactam by polymerization. Domamid T products are special textile grades with a high uniformity of relative viscosity and Amino..
|
|||
| Melting Point | 221 °C | 430 °F | |
|
Domo Domamid® 32 Polyamide 6
DOMAMID® 32 are Polyamide 6 pellets with a higher viscosity produced from Caprolactam by polymerization.Applications: Standard quality for production of monofilaments and fishing netsInformation pr..
|
|||
| Melting Point | 221 °C | 430 °F | DAM; 10°C/min; ISO 11357-1/-3 |
|
DuPont Performance Polymers Zytel® 73G35HSL BK262 Nylon 6
(Unverified Data**)
35% Glass Reinforced Heat Stabilized Polyamide 6 Zytel 73G35HSL BK262 is a 35% glass fiber reinforced heat stabilized black polyamide 6 resin for injection molding.Information provided by DuPont Per..
|
|||
| Melting Point | 221 °C | 430 °F | |
|
Azoty Tarnow™ Tarnamid® T-27 GB30 Polyamide 6 - Glass Beads Reinforced
30% Glass beads reinforced, medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Tarnamid® has the following main properties:High..
|
|||
| Melting Point | 221 °C | 430 °F | |
|
Azoty Tarnow™ Tarnamid® T-27 MS Polyamide 6 - Natural
Medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.For uncolored parts produced by injection molding, contain including and demo..
|
|||
| Melting Point | 221 °C | 430 °F | |
|
Azoty Tarnow™ Tarnamid® T-27 Polyamide 6 - Natural
Medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Tarnamid® has the following main properties:High mechanical strength, rigidi..
|
|||
| Melting Point | 221 °C | 430 °F | |
|
Azoty Tarnow™ Tarnamid® T-27 MCS HI Polyamide 6 - Impact Modified
Very high impact resistance, cold impact grade (to -40°C). Medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Tarnamid® has t..
|
|||
| Melting Point | 221 °C | 430 °F | ASTM D3418 |
|
Ashley Polymers Ashlene® 149WO PBT Polyester, 45% Glass Reinforced
A flame retardant PBT polyester with 45% glass reinforcement, mineral filled.Data provided by the manufacturer
|
|||
| Melting Point | 221 °C | 430 °F | 10°C/min; ISO 11357-1/-3 |
|
DuPont Performance Polymers Hytrel® SC988 NC010 Polyester Elastomer TPC-ET
(Unverified Data**)
82 Shore D High Performance Polyester Elastomer Developed for the Healthcare IndustryInformation provided by DuPont Performance Polymers
|
|||
| Melting Point | 221 °C | 430 °F | 10°C/min; DAM; ISO 11357-1/-3 |
|
DuPont Performance Polymers Zytel® FG7301 NC010 Nylon 6
(Unverified Data**)
Zytel® FG7301 NC010 is a general purpose, unlubricated polyamide 6 resin for extrusion applications. It has been developed for consideration into applications such as parts for the food industry.In..
|
|||
Copyright © lookpolymers.com All Rights Reserved