- HOME
- POLYMER SEARCH
- Polymer Property : Melting Point = 257 °F
Polymer Property : Melting Point = 257 °F Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 125 °C | 257 °F | Internal method |
|
Polimeri Europa Clearflex® CL 106 Hexene Copolymer Linear Low Density Polyethylene
Clearflex CL 106 is a hexene copolymer linear low density polyethylene (C6-LLDPE), with antioxidants, suitable for cast film extrusion.Films manufactured with Clearflex CL 106 are characterized by h..
|
|||
| Melting Point | 125 °C | 257 °F | Compression Molded; ASTM E794 |
|
NOVA Chemicals Surpass® RMs539-UG Octene sMDPE Rotational Molding Film
Features: Octene copolymerExceptional low temperature impact propertiesOutstanding stiffnessBroad processing windowSuperior whiteness for improved part appearanceEasy mold releaseNSF listed for Stan..
|
|||
| Melting Point | 125 °C | 257 °F | |
|
Mitsui Fybrel® UL 415 Polyolefin Synthetic Pulp, Dry Processes
(discontinued **)
Fybrel® (Polyolefin Synthetic Pulp) is a highly fibrillated fiber similar to wood pulp. There are three types available: Fybrel® E and Fybrel® UL, which are both made from polyethylene, and Type ..
|
|||
| Melting Point | 125 °C | 257 °F | Exxon Method |
|
ExxonMobil Escorene® LL-3001 LLDPE/Hexene Premium Film Resin, Tough, 0.6 mil Film
(discontinued **)
Data provided by the manufacturer, Exxon Chemical.A hexene copolymer LLDPE film resin. Films made from LL-3001 have outstanding tensile and toughness properties. The superior strength properties a..
|
|||
| Melting Point | 125 °C | 257 °F | Exxon Method |
|
ExxonMobil Escorene® LL-3105 LLDPE/Hexene Premium Film Resin, Tough
(discontinued **)
Data provided by the manufacturer, Exxon Chemical.A hexene copolymer LLDPE cast film resin. Films made from LL-3105 have outstanding tensile and toughness properties. The superior strength propert..
|
|||
| Melting Point | 125 - 190 °C | 257 - 374 °F | Huntsman/TMA |
|
Huntsman IROGRAN® A 70 E 4675 Polyester-Based TPU-High Performance Grade
Introduction: IROGRAN A 70 E 4675 is a softener free thermoplastic special-polyester-polyurethane for injection molding applications. Additional characteristics of the product are very short cycle t..
|
|||
| Melting Point | 125 - 129 °C | 257 - 264 °F | Sheath Melt Point; LCL-PR29 |
|
Intercontinental Polymers 1171 Bicomponent HDPE/PET Fiber Type - Denier 1.8 X 1.5 Inches
50/50 HDPE Sheath/PET Core. Luster: Semi-Dull. Finish: Hydrophilic.Applications of bicomponent polyester fiber: Absorbent products, hygiene products, non-wovens, filtration, sliver knit, microdeni..
|
|||
| Melting Point | 125 °C | 257 °F | DSC |
|
Lushan DE-1 Polyethylene Sintered Powder
PE sintered powder Lushan DE-1 is combined with more than 10 years practice and experience on the area of oil & gas pipeline anti-corrosion. PE sintered powder Lushan DE-1 is used on anti-corrosion ..
|
|||
| Melting Point | 125 - 180 °C | 257 - 356 °F | Huntsman/TMA |
|
Huntsman IROGRAN® A 80 H 4698 Polyester-Based TPU-Injection Molding Grade
Introduction: IROGRAN A 80 H 4698 is a transparent thermoplastic polyester-polyurethane for injection molding applications. Additional characteristics of the product are good melt flow and easy demo..
|
|||
| Melting Point | 125 - 170 °C | 257 - 338 °F | 0.025" extruded film, |
|
Huntsman IROGRAN® A 92 E 4670 TPU-Polyester
Introduction IROGRAN A 92 E 4670 is a thermoplastic polyester polyurethane for melt calendering. IROGRAN is part of the HUNTSMAN technical extrusion/injection molding product range and offers a spe..
|
|||
| Melting Point | 125 - 145 °C | 257 - 293 °F | |
|
Struktol MAGNESIUM STEARATE
High purity stearate with low soluble salt level that reduces discoloration during processing.STRUKTOL® Magnesium Stearate is used by the rubber and plastic industries as an effective elastomer p..
|
|||
| Melting Point | 125 °C | 257 °F | ASTM D2117 |
|
SCG Chemicals EL-Leneâ„¢ M3804 Butene (C4) Rotational Molding Resin
Natural base resin available in pellet / powder formKey Characteristics:High stiffnessGood processingFair impact resistanceTypical Applications: General-purpose products, such as small-to-medium wa..
|
|||
| Melting Point | 125 °C | 257 °F | ASTM D3418 |
|
Teknor Apex Terraloy™ MB 10000A Thermoplastic Starch + LLDPE
Notes: Terraloy™ MB-10000A is a Thermoplastic Starch/LLDPE masterbatch that contains up to 50% of TPS renewable content. Melt Index for LLDPE for the masterbatch is 0.9. This compound is for brown..
|
|||
| Melting Point | 125 °C | 257 °F | Melting point via DSC/ASTM D3418 |
|
DuPont Bynel® 4104 Anhydride-Modified LLDPE Adhesive Resin
Bynel® Series 4100 resins are anhydride-modified, linear low-density polyethylene (LLDPE) resins. All 4100 Series resins are available in pellet form for use in conventional extrusion and coextrusi..
|
|||
| Melting Point | 125 - 129 °C | 257 - 264 °F | crystalline; DSC |
|
Total 3802 B HDPE, cable, sheet, pipe, injection molding
FINATHENE® 3802 B is a polyethylene copolymer based on C6 hexene as co-monomer and is produced by a continuous low-pressure slurry polymerization process. FINATHENE® 3802 B is a black polyethylene..
|
|||
| Melting Point | 125 - 129 °C | 257 - 264 °F | crystalline; DSC |
|
Total 3802 Blue MDPE pipe, injection molding
FINATHENE® 3802 Blue is a polyethylene copolymer based on C6 hexene as co-monomer and is produced by a continuous low pressure slurry polymerization process. FINATHENE® 3802 Blue is a blue polyeth..
|
|||
| Melting Point | 125 °C | 257 °F | Kofler |
|
Lubrizol ESTANE® 58630 Ether Based Thermoplastic Polyurethane
Features: Good physical properties, hydrolysis resistance, low temperature performance and abrasion along with wide processing window for extrusion and low surface tack.Uses: Blown and flat die/cast..
|
|||
| Melting Point | 125 °C | 257 °F | ASTM D3417 |
|
Total HDPE 7195 High Density Polyethylene, Specialty Extrusion Resin
Characteristics:Medium molecular weightNarrow molecular weight distributionDesigned for high speed orientationApplications:MonofilamentSlit tapeWoven and knitted fabricsSpecialty filmsInformation pr..
|
|||
| Melting Point | 125 °C | 257 °F | Peak Melting Temperature; ExxonMobil Method |
|
ExxonMobil LL 3201.69 Premium High Strength Film Resin
Product Description: LL 3201 resins are LLDPE hexane copolymer film resins. Films made from LL 3201 resins have outstanding tensile, stiffness and toughness properties. These superior properties, al..
|
|||
| Melting Point | 125 °C | 257 °F | ASTM D3418 |
|
ExxonMobil LLP8360.29 Rotational Molding Resin
Product Description: LL 8360 is a linear low density hexene copolymer designed to offer excellent processability along with outstanding dimensional control and low warpage. This resin is ideally sui..
|
|||
| Melting Point | 125 °C | 257 °F | Dow Method (DSC) |
|
Dow ASPUN™ 6830A Linear Low-Density Polyethylene (LLDPE)
ASPUN™ 6830A Fiber Grade Resin: Suggested Optimum Process: Staple Typical Application: Yarn & Biocomponent FibersInformation provided by Dow
|
|||
| Melting Point | 125 °C | 257 °F | Dow Method (DSC) |
|
Dow DNDA-1082 NT 7 Linear Low Density Polyethylene Resin
DOW DNDA-1082 NT 7 is produced using UNIPOL™ PE process technology. It is intended for high-speed injection molding of thin walled parts such as downguaged lids. Information provided by Dow
|
|||
| Melting Point | 125 °C | 257 °F | Dow Method (DSC) |
|
Dow TUFLIN™ HS-7066 NT 7 Linear Low Density Polyethylene Resin
Hexene Linear Low Density Resin Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a TUFLIN™ HS-7066 NT 7 is a fractional melt, ethylene-hexene copolymer, designed for good toughness and stiffness. Th..
|
|||
| Melting Point | 125 °C | 257 °F | ASTM-D3418 |
|
Braskem RA34U3 LLDPE Rotomolding Polyethylene
The resin RA34U3 is a linear low-density polyethylene, 1-butene based, with a good balance of processability, environmental stress cracking resistance, and impact strength. It contains long term UV6..
|
|||
| Melting Point | 125 - 130 °C | 257 - 266 °F | |
|
BASF NEOL® Neolpentylglycol Flakes
Formula: C5H12O2CAS: 126-30-7Description: Neolpentylglycol (NEOL) flakes are colorless with a sweetish odor.Synonyms: Neopentanediol, 2,2-Dimethyl-1,3-propanediol, 1,3-Dihydroxy-2,2-dimethylpropane,..
|
|||
| Melting Point | 125 °C | 257 °F | ASTM D3418 |
|
ExxonMobil LL 8360 Rotational Molding Resin
(discontinued **)
LL 8360 is a linear low density hexene copolymer designed to provide good processability along with outstanding dimensional control and low warpage. This resin is ideally suited for applications tha..
|
|||
| Melting Point | 125 °C | 257 °F | DSC; ASTM D3418 |
|
DuPont Bynel® 41E712 Adhesive Resin
(discontinued **)
Bynel® Series 4100 resins are anhydride-modified linear low-density polyethylene (LLDPE) resins. They are available in pellet form for use in conventional extrusion and coextrusion equipment design..
|
|||
| Melting Point | 125 °C | 257 °F | ASTM D2117 |
|
SCG Chemicals EL-Lene™ M50 Octene (C8) Rotational Molding Resin
Color compound resin available in pellet / powder formKey Characteristics:Excellent ESCRExcellent impact resistanceLow warpageFair processingTypical Applications: Chemical storage tanks, diesel tan..
|
|||
| Melting Point | 125 °C | 257 °F | Exxon Method |
|
ExxonMobil Escorene® LL-8302 LMDPE Rotational Molding Grade
(discontinued **)
Data provided by the manufacturer, Exxon Chemical.LL-8300 series are linear medium density polyethylene resins that provide outstanding environmental stress crack resistance. LL-8302 is the base re..
|
|||
| Melting Point | 125 °C | 257 °F | |
|
Mitsui Fybrel® UL 410 Polyolefin Synthetic Pulp, Wet Processes
(discontinued **)
Fybrel® (Polyolefin Synthetic Pulp) is a highly fibrillated fiber similar to wood pulp. There are three types available: Fybrel® E and Fybrel® UL, which are both made from polyethylene, and Type ..
|
|||
Copyright © lookpolymers.com All Rights Reserved