- HOME
- POLYMER SEARCH
- Polymer Property : CTE, linear = 11.5 µm/m-°C
Polymer Property : CTE, linear = 11.5 µm/m-°C Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear |
11.5
µm/m-°C @Temperature 20.0 - 300 °C |
6.39
µin/in-°F @Temperature 68.0 - 572 °F |
|
|
Kennametal Stellite Stellite® 98M2 with P/M Processing
Adhesive wear test data P/M 0.58 Typical applications include vane plugs, fuel metering pins, spacer bushings, ball bearing blanks, race bearing blanks, diesel engine exhaust, fluid valve seats, saw..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 20.0 - 100 °C |
6.39
µin/in-°F @Temperature 68.0 - 212 °F |
|
|
Industeel CLC 1.2312 Prehardened Mold Steel (300HB/32HRC) with Improved Machinability
Description: CLC 1.2312 is a chromium-manganese-molybdenum grade designed for plastic mold industry. This grade is normally delivered in a prehardened condition at a hardness level of 300HB/32HRC. T..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 20.0 - 93.0 °C |
6.39
µin/in-°F @Temperature 68.0 - 199 °F |
|
|
Haynes Hastelloy® S alloy, flat products, solution heat-treated at 538°C (1000°F), aged 4000 hours
Nickel-based, high temperature alloy. Excellent thermal stability, low thermal expansion, excellent oxidation resistance to 1093°C, good high temperature and thermal fatigue strength. Application..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 20.0 - 93.0 °C |
6.39
µin/in-°F @Temperature 68.0 - 199 °F |
|
|
Haynes Hastelloy® S alloy, flat products, solution heat-treated at 538°C (1000°F), aged 8000 hours
Nickel-based, high temperature alloy. Excellent thermal stability, low thermal expansion, excellent oxidation resistance to 1093°C, good high temperature and thermal fatigue strength. Application..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 20.0 - 93.0 °C |
6.39
µin/in-°F @Temperature 68.0 - 199 °F |
|
|
Haynes Hastelloy® S alloy, gas tungsten arc welded plate 12.7 mm (1/2 in.) thick, aged 16000 hours
Nickel-based, high temperature alloy. Excellent thermal stability, low thermal expansion, excellent oxidation resistance to 1093°C, good high temperature and thermal fatigue strength. Application..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 20.0 - 93.0 °C |
6.39
µin/in-°F @Temperature 68.0 - 199 °F |
|
|
Haynes Hastelloy® S alloy, plate 12.7 mm (1/2 in.) thick, solution heat-treated at 427°C (800°F), aged 16000 hours
Nickel-based, high temperature alloy. Excellent thermal stability, low thermal expansion, excellent oxidation resistance to 1093°C, good high temperature and thermal fatigue strength. Application..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 20.0 - 93.0 °C |
6.39
µin/in-°F @Temperature 68.0 - 199 °F |
|
|
Haynes Hastelloy® S alloy, plate 12.7 mm (1/2 in.) thick, solution heat-treated at 427°C (800°F), aged 8000 hours
Nickel-based, high temperature alloy. Excellent thermal stability, low thermal expansion, excellent oxidation resistance to 1093°C, good high temperature and thermal fatigue strength. Application..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 25.0 - 100 °C |
6.39
µin/in-°F @Temperature 77.0 - 212 °F |
|
|
Haynes Hastelloy® Hybrid-BC1® Nickel Alloy Sheet, Cold Rolled and Solution Annealed
HASTELLOY® HYBRID-BC1® alloy possesses much higher resistance to hydrochloric and sulfuric acids than the nickel-chromium-molybdenum (C-type) alloys, and can tolerate the presence of oxidizing..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 25.0 - 100 °C |
6.39
µin/in-°F @Temperature 77.0 - 212 °F |
|
|
Haynes Hastelloy® Hybrid-BC1® Nickel Alloy Synergic Gas Metal Arc Welded (GMAW) All Weld Cruciform
HASTELLOY® HYBRID-BC1® alloy possesses much higher resistance to hydrochloric and sulfuric acids than the nickel-chromium-molybdenum (C-type) alloys, and can tolerate the presence of oxidizing..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 21.1 - 204 °C |
6.40
µin/in-°F @Temperature 70.0 - 400 °F |
|
|
Crucible Steel CPM® Nu-Die® EZ Tool Steel
CRUCIBLE CPM Nu-Die EZ is a new, patented die and mold steel designed for service as die casting dies and plastic injection molds. It is supplied in the prehardened condition, and is easily machined..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 20.0 - 260 °C |
6.39
µin/in-°F @Temperature 68.0 - 500 °F |
|
|
Crucible Steel CPM® Rex® 54® (HS) High Speed Steel
CPM Rex 54 is a cobalt-bearing high speed steel designed to offer an improvement in the red hardness of the popular M4 grade, while maintaining wear properties equivalent to M4. CPM Rex 54 has a che..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 20.0 - 260 °C |
6.39
µin/in-°F @Temperature 68.0 - 500 °F |
|
|
Crucible Steel PM M2 Tool Steel
PM M2 is an improved quality tool steel compared to conventionally produced material. The powder metallurgy process results in a homogeneous microstructure exhibiting a uniform distribution of fine ..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 21.1 - 260 °C |
6.40
µin/in-°F @Temperature 70.0 - 500 °F |
|
|
Crucible Steel REX® M2 S High Speed Steel
REX M2 is a tungsten-molybdenum high speed steel which gives outstanding performance in all operations where a general purpose high speed steel is required. REX M2 has a wide hardening range, excell..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 200 °C |
6.39
µin/in-°F @Temperature 392 °F |
|
|
Bohler-Uddeholm BÖHLER S400(M7) High Speed Steel
Description: High alloyed molybdenum high speed steel with good resistance and high toughness.Applications: Taps, twist drills, reamers, milling tools, broaches tools, cold extrusion dies.Standards:..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 100 °C |
6.39
µin/in-°F @Temperature 212 °F |
|
|
Bohler-Uddeholm BÖHLER S692/S693 MICROCLEAN® PM M4 High Speed Steel
Description: S692/S693 MICROCLEAN are high-sulfur and low sulfur versions of high-carbon PM M4 high speed steel that is produced using state-of-the-art “Generation 3” powder processing technology...
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 20.0 - 100 °C |
6.39
µin/in-°F @Temperature 68.0 - 212 °F |
|
|
Bohler-Uddeholm BÖHLER W400 VMR® H11 Hot Work Tool Steel
W400 VMR is a low silicon, chromium-vanadium hot work tool steel which has been vacuum remelted to obtain the highest uniformity, the best cleanliness of tool steel. The material is characterized:E..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 21.0 - 93.0 °C |
6.39
µin/in-°F @Temperature 69.8 - 199 °F |
|
|
Carpenter Custom 630 (17-Cr-4Ni) Precipitation Hardening Stainless Steel, Condition H 1100 (Heated 593°C)
Data provided by Carpenter Technology Corporation.Custom 630 (17Cr-4Ni) is a martensitic precipitation/age-hardening stainless steel offering high strength and hardness along with excellent corrosio..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 0.000 - 315 °C |
6.39
µin/in-°F @Temperature 32.0 - 599 °F |
|
|
ATI Allegheny Ludlum Stainless Steel AL 410S™ (UNS S41008)
Allegheny Ludlum Al 410S™ stainless steel is a low-carbon modification of Type 410 stainless steel. Low carbon and optionally a small addition of titanium and /or columbium minimize austenite form..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 20.0 - 500 °C |
6.39
µin/in-°F @Temperature 68.0 - 932 °F |
|
|
ATI Allegheny Ludlum Stainless Steel Free Machining Grade Type 416, Tempered at 593°C (UNS S41600)
Allegheny Ludlum's 416 is a free-machining stainless steel specifically designed to exhibit improved machinability. These modifications retain, in so far as possible, the good mechanical properties..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 20.0 - 500 °C |
6.39
µin/in-°F @Temperature 68.0 - 932 °F |
|
|
ATI Allegheny Ludlum Stainless Steel Free Machining Grade Type 416, Tempered at 649°C (1200°F) (UNS S41600)
Allegheny Ludlum's 416 is a free-machining stainless steel specifically designed to exhibit improved machinability. These modifications retain, in so far as possible, the good mechanical properties..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 200 °C |
6.39
µin/in-°F @Temperature 392 °F |
|
|
Bohler-Uddeholm BÖHLER S500(m42) High Speed Steel
Description: Cobalt Molybdenum high speed steel processing high hardness, excellent cutting properties, high red hardness and good toughness. BOHLER S500 is also available in the special grade ISORA..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 20.0 - 100 °C |
6.39
µin/in-°F @Temperature 68.0 - 212 °F |
|
|
Bohler-Uddeholm BÖHLER W302 ISOBLOC® H13 hot work tool steel
Properties:Hot work tool steel featuring excellent hot tensile properties, high hot wear resistance, adequate toughness and heat checking resistance, adequate toughness and heat checking; admits wat..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 20.0 - 500 °C |
6.39
µin/in-°F @Temperature 68.0 - 932 °F |
|
|
ATI Allegheny Ludlum Stainless Steel Free Machining Grade Type 416, Tempered at 760°C (UNS S41600)
Allegheny Ludlum's 416 is a free-machining stainless steel specifically designed to exhibit improved machinability. These modifications retain, in so far as possible, the good mechanical properties..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 25.0 - 100 °C |
6.39
µin/in-°F @Temperature 77.0 - 212 °F |
|
|
Haynes Hastelloy® Hybrid-BC1® Nickel Alloy Plate, Hot Rolled and Solution Annealed
HASTELLOY® HYBRID-BC1® alloy possesses much higher resistance to hydrochloric and sulfuric acids than the nickel-chromium-molybdenum (C-type) alloys, and can tolerate the presence of oxidizing spe..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 25.0 - 100 °C |
6.39
µin/in-°F @Temperature 77.0 - 212 °F |
|
|
Haynes Hastelloy® Hybrid-BC1® Nickel Alloy Synergic Gas Metal Arc Welded (GMAW) Plate
HASTELLOY® HYBRID-BC1® alloy possesses much higher resistance to hydrochloric and sulfuric acids than the nickel-chromium-molybdenum (C-type) alloys, and can tolerate the presence of oxidizing spe..
|
|||
| CTE, linear |
11.5
µm/m-°C @Temperature 20.0 - 93.0 °C |
6.39
µin/in-°F @Temperature 68.0 - 199 °F |
|
|
Haynes Hastelloy® S alloy, plate 12.7 mm (1/2 in.) thick, solution heat-treated at 871°C (1600°F), aged 1000 hours
Nickel-based, high temperature alloy. Excellent thermal stability, low thermal expansion, excellent oxidation resistance to 1093°C, good high temperature and thermal fatigue strength. Applications ..
|
|||
Copyright © lookpolymers.com All Rights Reserved