- HOME
- POLYMER SEARCH
- Polymer Property : Deflection Temperature at 0.46 MPa (66 psi) = 214 °F
Polymer Property : Deflection Temperature at 0.46 MPa (66 psi) = 214 °F Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | ASTM D648 |
|
RheTech Products HP521-00UV 15% Talc Reinforced High Performance Polypropylene Copolymer, UV Stabilized, Natural
Applications: Interior trimIP structural componentsCenter consolesInjection molding conditions reported in table.Information provided by RheTech Products.
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | ASTM D648 |
|
RheTech Products HP521-501UV 15% Talc Reinforced High Performance Polypropylene Copolymer, UV Stabilized, 149B Shale
Applications: Interior trimIP structural componentsInjection molding conditions reported in table.Information provided by RheTech Products.
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) |
101
°C <br>@Thickness 6.40 mm
|
214
°F <br>@Thickness 0.252 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics Cycoloy® C2950HF PC+ABS
Non-chlorinated and non-brominated flame retardant PC/ABS offering balanced impact and heat properties plus improved flow for various applications.
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | 120°C/h; ISO 75/1 |
|
Polykemi AB POLYfill PPC T1010 Polypropylene, Mineral Reinforced
Information provided by Polykemi AB
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) |
101
°C <br>@Thickness 6.40 mm
|
214
°F <br>@Thickness 0.252 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics Cycoloy® RCY6214 PC+ABS (Asia Pacific)
Cycoloy* RCY6214 resin is an injection moldable PC/ABS blend with non-brominated and non-chlorinated flame retardant. It contains 35% post consumer recycle content with a UL-94 V0 rating @ 1.5 mm. D..
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | ASTM D648 |
|
PTS PCA-30G00 Impact Modified Polycarbonate/PBT Alloy
For Cold Temperature Impact.Information provided by Polymer Technology and Services, LLC (PTS).
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | ISO 75 |
|
Polycasa SAN
QUINN SAN sheets are characterized by good optical properties and a brilliant surface. The QUINN SAN range contains sheets that are easy to handle, to vacuum form, and show a very good dimensional s..
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | Unannealed; ASTM D648 |
|
Phillips 66 COPYLENE® CH350 Polypropylene Homopolymer
COPYLENE™ CH350 is a controlled rheology, barefoot homopolymer designed for application as a base resin for compounding, consumer products and other injection molding applications.Applications: Inj..
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | ASTM D648 |
|
Flint Hills P4G3Z-050 Homopolymer Polypropylene
Homopolymer, FDA compliant.Features: Low water carryover.Applications: Extrusion: slit film and oriented fibers.Former Huntsman polypropylene products are now produced by Flint Hills Resources.
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | ASTM D648 |
|
Ineos H03G-02 Polypropylene
This is a homopolymer designed for fiber and tape applications requiring low water carryover and low die build-up. This resin meets the requirements of the U.S. Food and Drug Administration as spec..
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | ISO 75-1,-2 |
|
Inno-Comp INNOPOL® CS 1-3000 B DEL Polypropylene Homopolymer
INNOPOL® CS 1-3000 B DEL is developed for producing injection molded automotive components.All information provided by INNO-COMP.
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | annealed; ASTM Test |
|
Styrolution Luran® S 776 SE ASA
Luran S 776 SE is a general purpose extrusion ASA grade with good toughness and strength, used for sheet and profile extrusions.Information provided by STYROLUTION, which is a joint venture between ..
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | ISO 75-1/-2 |
|
Styrolution Luran® S 777 K UV Black 56625 ASA
Description: Easy flowing injection molding grade with good toughness and heat distortion resistance.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) |
101
°C <br>@Thickness 3.20 mm
|
214
°F <br>@Thickness 0.126 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics Xenoy® X5300WX PBT+PC (Asia Pacific)
Unreinforced, opaque PBT+PC alloy. Chemical resistance and good mechanical performance. UV-stabilized. Excellent weatherability.
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | Unannealed; ASTM D648 |
|
Techmer ES Plastiblend® ABS CR X
Availability: North AmericaForms: PelletsFeatures: Good Chemical ResistanceProcessing Method: Injection MoldingInformation provided by TP Composites, Inc.
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | ISO 75-2 |
|
Borealis Daplen™ EE340AE Polypropylene TPO Compound
Daplen™ EE340AE is a 30% mineral filled elastomer modified polypropylene compound intended for injection molding. This material has excellent balanced mechanical properties, gives a good surface q..
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | DIN 53461 |
|
Polyram RamShine PAS100 ASA, General Purpose
General purpose injection molding ASAInformation provided by Polyram Ram On Ind.
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | ASTM D648 |
|
Westlake Plastics Absylux® Acrylonitrile-Butadiene-Styrene, Compression Molded
Compression molded Absylux ABS is a low cost engineering plastic ideal for prototyping. It has excellent dimensional stability and lends itself to all forms of fabricationInformation provided by We..
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | ASTM D648 |
|
Formosa Plastics Formolene® 6144O Impact Copolymer Polypropylene
Impact Copolymer for Appliance Applications Formolene® 6144O is a medium impact copolymer of polypropylene characterized by its easy mold flow, physical property balance and excellent dimensional s..
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) |
101
°C <br>@Thickness 3.17 mm
|
214
°F <br>@Thickness 0.125 in
|
ISO 75 |
|
A. Schulman FORMION™ FI 243 Ionomer
Information provided by A. Schulman.
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) |
101
°C <br>@Thickness 3.17 mm
|
214
°F <br>@Thickness 0.125 in
|
ISO 75 |
|
A. Schulman FORMION™ FI 243 Ionomer
Information provided by A. Schulman.
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | DIN 53461 |
|
Polyram RamShine PAS701 ASA, UV Stabilized
UV stabilized general purpose injection molding ASAInformation provided by Polyram Ram On Ind.
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | ISO 75 |
|
Polyram RamShine PAS702 ASA, UV Stabilized
UV stabilized, general purpose, injection molding ASA.Information provided by Polyram.
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | ISO 75-1/-2 |
|
Covestro Bayblend® FR 3006 Polycarbonate + ABS, Flame Retardant Grade
Injection molding gradehigh heat resistanceVicat/B 120 = 110 °Ceasy flowUL-listing 94 V-1 at 1.5 mm and V-0 at 2.0 mmPreprocessingMax. Water content
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | ASTM D648 |
|
Aclo Accutech ABS ABS833G20L Glass Reinforced |
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | ASTM D648 |
|
A. Schulman ComAlloy Comtuf® 607 Nylon 6/6, Impact Modified, Flow Enhanced
Data provided by the manufacturer, ComAlloy International Company. Superior toughness and impact resistance characterize Comtuf® materialsThe ComAlloy product line has been integrated into the A Sc..
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 - 114 °C | 214 - 237 °F | with 160ºC thermal postcure; ASTM D648 |
|
3D Systems Accura® 40 Plastic for SLA® Systems
40 Accura "Nd" type material - for use with Viper SLA, and SLA 3500, 5000 and 7000 systems.ApplicationsHigh temperature testing:Automotive "under-the-hood" partsIntake manifoldsLighting components a..
|
|||
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | ASTM D648 |
|
RheTech Products HP501-00 High Performance Polypropylene Copolymer, Non-UV Stabilized, Natural
Applications: Battery traysInterior TrimInjection molding conditions reported in table.Information provided by RheTech Products.
|
|||
Copyright © lookpolymers.com All Rights Reserved