- HOME
- POLYMER SEARCH
- Polymer Property : Brittleness Temperature = -49.0 °F
Polymer Property : Brittleness Temperature = -49.0 °F Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Brittleness Temperature | -45.0 °C | -49.0 °F | ASTM D746 |
|
PolyOne Geon™ Vinyl Wire & Cable W7400 Polyvinyl Chloride, Flexible (PVC, Flexible)
Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | ASTM D746 |
|
PolyOne Geon™ Vinyl Wire & Cable WR7426L Polyvinyl Chloride, Flexible (PVC, Flexible)
Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications. Provisional Product Information - Physical and Mechanical properties based on initial production.Information provide..
|
|||
| Brittleness Temperature | <= -45.0 °C | <= -49.0 °F | ASTM D746 |
|
S&E Specialty Polymers GTPO8290FR-75 RoHS PVC
Application: RoHS compliant, flexible flame retardant thermoplastic olefin compound.Information provided by S&E Specialty Polymers
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | ASTM D746 |
|
PolyOne Geon™ Vinyl Flexible A44565 Polyvinyl Chloride, Flexible (PVC, Flexible)
Information provided by PolyOne
|
|||
| Brittleness Temperature | <= -45.0 °C | <= -49.0 °F | TPE-0089 (ASTM D 746) |
|
Advanced Elastomer Systems Santoprene® 253-50 Thermoplastic Rubber
(discontinued **)
A colorable thermoplastic flame retardant elastomer with good fluid resistance, formulated to replace thermoset elastomers such as EPDM, polychloroprene, and chlorosulfonated polyethylene. It can b..
|
|||
| Brittleness Temperature | <= -45.0 °C | <= -49.0 °F | |
|
Sibur 1045-12 Compound 948 Polyvinyl Chloride (PVC)
Shall correspond to control sample, approved in accordance with the established procedure. Pores, which can be seen by eyes, are not allowed. Plastic shall no burn at stop of worm extruder for a p..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | ASTM D746 |
|
Teknor Apex APEX® 1700-55 Polyvinyl Chloride, Flexible
Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMFeatures-General Purpose, Low Gloss Uses-Appliance Components, Footwear, FurnitureForms-PelletsProcessing Met..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | ASTM D746 |
|
Teknor Apex Flexalloy® 3500-65 Polyvinyl Chloride Elastomer
Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTM Features: Ultra High MWUses- Tubing, Pump PartsForms-PelletsProcessing- ExtrusionInformation provided by Te..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | ASTM D746 |
|
Teknor Apex Flexalloy® 9900-55 Polyvinyl Chloride Elastomer
Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTM Features: Oil Resistant, Ultra High MWUses- Footwear, Tubing, Gaskets, Tools (Power/Others), Hose, Wire and ..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | |
|
A. Schulman POLYTROPE™ TPP 402 Blow Molding Grade Olefinic Thermoplastic Elastomer
DescriptionPolytrope TPP 402 is a blow molding grade olefinic thermoplastic elastomer. This elastomer is specifically designed for flexible, automotive under-hood air ducts. This product contains ..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | |
|
A. Schulman POLYTROPE™ TPP 403 Blow Molding Grade Olefinic Thermoplastic Elastomer
DescriptionPolytrope TPP 403 is a blow molding grade olefinic thermoplastic elastomer. This elastomer is specifically designed for flexible, automotive under-hood air ducts. This product contains ..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | |
|
A. Schulman POLYTROPE™ TPP 503 Injection Molding Grade Olefinic Thermoplastic Elastomer
DescriptionPolytrope TPP 503 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring flexibility and high impact strength at sub-ambient temp..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | |
|
A. Schulman POLYTROPE™ TPP 1010-01 Injection Molding Reactor Grade Olefinic Thermoplastic Elastomer
DescriptionPolytrope TPP 1010-01 is an injection molding reactor grade olefinic thermoplastic elastomer (TPO). This product has excellent low temperature impact properties and flow characteristics ..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | |
|
A. Schulman POLYTROPE™ TPP 293 Injection Molding Grade Olefinic Thermoplastic Elastomer
DescriptionPolytrope TPP293 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring excellent low temperature impact properties with good dim..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | |
|
A. Schulman POLYTROPE™ TPP 510 Injection Molding Grade Olefinic Thermoplastic Elastomer
DescriptionPolytrope TPP 510 is an injection molding grade olefinic thermoplastic elastomer. This product has excellent low temperature impact properties and flow characteristics suitable for moldi..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | |
|
A. Schulman POLYTROPE™ TPP 293 Injection Molding Grade Olefinic Thermoplastic Elastomer
DescriptionPolytrope TPP293 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring excellent low temperature impact properties with good dim..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | |
|
A. Schulman POLYTROPE™ TPP 403 Blow Molding Grade Olefinic Thermoplastic Elastomer
DescriptionPolytrope TPP 403 is a blow molding grade olefinic thermoplastic elastomer. This elastomer is specifically designed for flexible, automotive under-hood air ducts. This product contains ..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | |
|
A. Schulman POLYTROPE™ TPP 1010-01 Injection Molding Reactor Grade Olefinic Thermoplastic Elastomer
DescriptionPolytrope TPP 1010-01 is an injection molding reactor grade olefinic thermoplastic elastomer (TPO). This product has excellent low temperature impact properties and flow characteristics ..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | |
|
A. Schulman POLYTROPE™ TPP 293 Injection Molding Grade Olefinic Thermoplastic Elastomer
DescriptionPolytrope TPP293 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring excellent low temperature impact properties with good dim..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | |
|
A. Schulman POLYTROPE™ TPP 1010-01 Injection Molding Reactor Grade Olefinic Thermoplastic Elastomer
DescriptionPolytrope TPP 1010-01 is an injection molding reactor grade olefinic thermoplastic elastomer (TPO). This product has excellent low temperature impact properties and flow characteristics ..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | |
|
A. Schulman POLYTROPE™ TPP 1010E-01 Olefinic Elastomer For Sheet Extrusion
DescriptionPolytrope TPP 1010E-01 is an olefinic elastomer designed for sheet extrusion, profile extrusion and blow molding. TPP 1010E-01 is a natural product which can be colored and UV stabilized..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | by Impact; ASTM D1790 |
|
Eastman Cadence™ GS5 Clear (Unpigmented) Copolyester for film calendering
Eastman Cadence™ copolyester, for calendered films, is a specialty plastic developed to meet the demand for an environmentally responsible material for the calendering industry. Available in diffe..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | Temperature Retraction, TR-10 |
|
Dow Nordel® IP 4520 Molded Golf Grip
FormulationNordel® IP 4520
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | Cold Flex; ISO 458/2 |
|
Fainplast Compounds CL 69 Flexible PVC, Sheathing
Sheath for low temperatures
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | ASTM D746 |
|
Colorite Polymers MULTICHEM™ 8014 Vinyl-Urethane Blend
Description: MULTICHEM™ is characterized by:Greater ResiliencyImproved ElasticityLow Temperature PropertiesLower ExtractabilityMolding and ExtrusionInformation provided by Colorite Polymers.
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | ASTM D-746 |
|
Axiall 8651 Moldings & Extrusions Flexible PVC
A quality, low gravity extrusion compound with excellent low temperature properties. Designed for use in weatherstrips, flexible gaskets and extruded shapes.Information provided by Georgia GulfGeor..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | ASTM D746 |
|
Colorite Polymers 6577 Non-Phthalate 77 Series Vinyl Compound
Description: The Colorite 77 series is a family of compounds designed for those medical device producers that require the use of a non-phthalate plasticizer that has superior resistance to extractio..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | |
|
A. Schulman POLYTROPE™ TPP 510 Injection Molding Grade Olefinic Thermoplastic Elastomer
DescriptionPolytrope TPP 510 is an injection molding grade olefinic thermoplastic elastomer. This product has excellent low temperature impact properties and flow characteristics suitable for moldi..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | ASTM D746 |
|
LyondellBasell Hifax™ ETA-3131 Thermoplastic Olefin Resin
Key Features: medium melt flow, medium modulus thermoplastic olefin resin, excellent impact and stiffness balance, excellent processabilityApplications: automotive filler and valance panels, lower a..
|
|||
| Brittleness Temperature | -45.0 °C | -49.0 °F | |
|
A. Schulman POLYTROPE™ TPP 1010E-01 Olefinic Elastomer For Sheet Extrusion
DescriptionPolytrope TPP 1010E-01 is an olefinic elastomer designed for sheet extrusion, profile extrusion and blow molding. TPP 1010E-01 is a natural product which can be colored and UV stabilized..
|
|||
Copyright © lookpolymers.com All Rights Reserved