- HOME
- POLYMER SEARCH
- Polymer Property : Brittleness Temperature = -50.0 °C
Polymer Property : Brittleness Temperature = -50.0 °C Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
| PolyOne Geon™ Vinyl Flexible XV3725 Polyvinyl Chloride, Flexible (PVC, Flexible) All ingredients used in the formulation of this compound are listed in the United States FDA Code of Federal Regulations, Title 21. The only restriction is that the plasticizer is For foods of high .. |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
| PolyOne Geon™ Vinyl Wire & Cable WR7400L Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
| ExxonMobil Santoprene® 121-80M300 Thermoplastic Rubber
(discontinued **) Description: A black thermoplastic high-flow elastomer for excellent injection molding performance with good fluid resistance, formulated to replace thermoset elastomers such as EPDM, polychloropren.. |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
| PolyOne Geon™ Vinyl Flexible R7400B Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
| Multibase Multi-Flex® D 3204 TPE Thermoplastic Elastomer Features: Chemical Resistance, Good Colorability, GoodElasticity, HighElectrically InsulatingFlame RetardantFlexibility, GoodHeat StabilizedOzone ResistantProcessability, GoodUV Resistance, Good P.. |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
| Multibase Multi-Flex® D 3902 MRS TPE Thermoplastic Elastomer Forms: PelletsProcessing Methods:Injection Molding Information provided by Multibase |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
| Teknor Apex APEX® 4150 Polyvinyl Chloride Compound Notes: Sunlight Resistant; 60°C Oil Resistant; Ultra Low Temperature Jacket Temperature Rating: 105°CInformation Provided by Teknor Apex |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
| Teknor Apex APEX® 94-A0098C-50 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMFeatures-General Purpose Uses-General PurposeAppearance-ClearForms-PelletsProcessing Method-Injection Molding.. |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
| Teknor Apex ELEXAR® EL 8614 Thermoplastic Elastomer Information provided by Teknor Apex Company |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
| Teknor Apex Telcar® CR-92-E2555A-92 Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets P.. |
|||
| Brittleness Temperature | <= -50.0 °C | <= -58.0 °F | ASTM D746 |
| Teknor Apex Telcar® TL-1654A Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets .. |
|||
| Brittleness Temperature | <= -50.0 °C | <= -58.0 °F | ASTM D746 |
| Teknor Apex Telcar® TL-3050 Thermoplastic Elastomer Temperature Ratings: Wet Location: 75°C, Dry Location: 90°C Processing Method: ExtrusionInformation Provided by Teknor Apex |
|||
| Brittleness Temperature | <= -50.0 °C | <= -58.0 °F | ASTM D746 |
| Teknor Apex Telcar® TL-3050-88 Thermoplastic Elastomer Temperature Ratings: Wet Location: 75°C, Dry Location: 90°C Processing Method: ExtrusionInformation Provided by Teknor Apex |
|||
| Brittleness Temperature | <= -50.0 °C | <= -58.0 °F | ASTM D2863 |
| Borealis FR4830 Chemically Crosslinkable Polyethylene Compound for Primary Automotive Wires FR4830 is a chemically crosslinkable Non-halogen flame retardant Polyethylene compound for Primary Automotive and Appliance Wire. Applications: FR4830 is intended for use as a 125º C rated primary .. |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | |
| A. Schulman POLYTROPE™ TPP 504 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 504 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring flexibility and high impact strength at sub-ambient temp.. |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | |
| A. Schulman POLYTROPE™ TPP 504E Extrusion Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 504 is an extrusion grade olefinic thermoplastic elastomer suitable for profile extrusion or blow molding. Characteristics of this product include excellent low temperature.. |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | |
| A. Schulman POLYTROPE™ TPP 508 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 508 is an injection molding grade olefinic thermoplastic elastomer. This product has excellent low temperature impact properties and flow characteristics suitable for moldi.. |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | |
| A. Schulman POLYTROPE™ TPP 504E Extrusion Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 504 is an extrusion grade olefinic thermoplastic elastomer suitable for profile extrusion or blow molding. Characteristics of this product include excellent low temperature.. |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | JIS K6301 |
| Toyobo PELPRENE™ S9002 Polyester TPE, Ultra Heat-resistant Features: Polyester TPE, Ultra Heat-resistantInformation provided by Toyobo. |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D 746 |
| Zylog Neoplast® 240 FT EB Thermoplastic Vulcanizate Neoplast 240 FT EB is a hard, dynamically vulcanized thermoplastic vulcanizate (TPV), based on polyolefin chemistry, and is intended for Injection Molding, Blow Molding and Extrusion applications.Ro.. |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | |
| A. Schulman POLYTROPE™ TPP 504E Extrusion Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 504 is an extrusion grade olefinic thermoplastic elastomer suitable for profile extrusion or blow molding. Characteristics of this product include excellent low temperature.. |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | |
| A. Schulman POLYTROPE™ TPP 508 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 508 is an injection molding grade olefinic thermoplastic elastomer. This product has excellent low temperature impact properties and flow characteristics suitable for moldi.. |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | |
| A. Schulman POLYTROPE™ TPP 1008-01 Injection Molding Reactor Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 1008-01 is an injection molding reactor grade olefinic thermoplastic elastomer (TPO). This product has excellent low temperature impact properties and flow characteristics .. |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | |
| A. Schulman POLYTROPE™ TPP 504E Extrusion Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 504 is an extrusion grade olefinic thermoplastic elastomer suitable for profile extrusion or blow molding. Characteristics of this product include excellent low temperature.. |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | |
| Fainplast Compounds GS 55/KSN Flexible PVC, Injection Molding for Transparent Technical Items Cupping-glasses |
|||
| Brittleness Temperature | <= -50.0 °C | <= -58.0 °F | ASTM D726 |
| Arkema Group LOTADER® 4210 Terpolymer Ethylene - Acrylic Ester - Maleic Anhydride LOTADER 4210 is a random terpolymer of Ethylene, Acrylic Ester and Maleic Anhydride, polymerized by high-pressure autoclave process. LOTADER 4210 is a versatile adhesive for extrusion coating or lam.. |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D-746 |
| Axiall 7540 Moldings & Extrusions Flexible PVC A high quality clear outdoor grade PVC molding and extrusion compound formulated for good UV light resistance and excellent low temperature properties.Information provided by Georgia GulfGeorgia Gul.. |
|||
| Brittleness Temperature | <= -50.0 °C | <= -58.0 °F | ASTM D746 |
| Teknor Apex Elexar® EL-8730A Thermoplastic Elastomer Notes: Sunlight Resistant; Temperature Rating: 125°C Processing Method: Extrusion; Injection MoldingInformation Provided by Teknor Apex |
|||
| Brittleness Temperature | -50.0 °C | -58.0 °F | |
| A. Schulman POLYTROPE™ TPP 508 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 508 is an injection molding grade olefinic thermoplastic elastomer. This product has excellent low temperature impact properties and flow characteristics suitable for moldi.. |
|||
Copyright © lookpolymers.com All Rights Reserved