- HOME
- POLYMER SEARCH
- Polymer Property : Deflection Temperature at 1.8 MPa (264 psi) = 132 °C
Polymer Property : Deflection Temperature at 1.8 MPa (264 psi) = 132 °C Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 132 °C | 270 °F | |
|
Plastcom SLOVALEN PC 59 GF 30 PP, 30% glass fibre
FeaturesModified homopolymer PP for injection moulding, chemically reinforced with 30% glass fibre, contains themodifier of mechanical properties.Increased strength in comparison with unfilled PP. A..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 132 °C | 270 °F | ASTM D648 |
|
RheTech Products G13P100-332UV 13% Glass Fiber Reinforced Polypropylene, UV Stabilized, (GM 9772) Light Neutral
Applications: Interior trimAir ducts - distributionFuel filler pocketInjection molding conditions reported in table.Information provided by RheTech Products.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 132 °C | 270 °F | ASTM D648 |
|
RheTech Products G13P100-559UV 13% Glass Fiber Reinforced Polypropylene, UV Stabilized, (GM WPP 646H) Charcoal Metallic
Applications: Interior trimAir ducts - distributionFuel filler pocketInjection molding conditions reported in table.Information provided by RheTech Products.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 132 °C | 270 °F | ASTM D648 |
|
RheTech Products G13P100-598UV 13% Glass Fiber Reinforced Polypropylene, UV Stabilized, (NH-293L) Seagull Gray
Applications: Interior trimAir ducts - distributionFuel filler pocketInjection molding conditions reported in table.Information provided by RheTech Products.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
132
°C <br>@Thickness 6.40 mm
|
270
°F <br>@Thickness 0.252 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics Lexan® 101R PC
UL rated HB as of 10/97. 200 series recommended when V-2 rating required. Nonhalogenated. 7.0 MFR, for thicker sections without sinks. Internal mold release.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 132 °C | 270 °F | ASTM D648 |
|
Quadrant EPP Fluorosint® 500 PTFE, synthetic mica-filled PTFE, compression molded (ASTM Product Data Sheet) |
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
132
°C <br>@Thickness 6.40 mm
|
270
°F <br>@Thickness 0.252 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics Lexan® 943AR PC (Asia Pacific)
Medium viscosity, superior flame retardance. UV-Stabilized. Clear, tints and opaque colors.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 132 °C | 270 °F | ASTM D648 |
|
Polymer Resources PC-GP1-D Polycarbonate, General Purpose, Low Flow
Polycarbonate, General Purpose, Low FlowFeatures: • Ultra High Impact Resistance • Self ExtinguishingProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
132
°C <br>@Thickness 3.20 mm
|
270
°F <br>@Thickness 0.126 in
|
unannealed; ASTM D 648 |
|
SABIC Innovative Plastics Lexan® FXD103 PC (Asia Pacific)
FXD103 is a Light Diffusion effect, part of the VisualFX family. These effects have been developed to meet increasing Aesthetic demands in the Marketplace.This data was supplied by SABIC-IP for the ..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
132
°C <br>@Thickness 3.20 mm
|
270
°F <br>@Thickness 0.126 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics Lexan® FXD103R PC (Asia Pacific)
FXD103R is a Light Diffusion effect, which is part of the VisualFX family. These effects have been developed to meet increasing Aesthetic demands in the Marketplace. Color Package may affect propert..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
132
°C <br>@Thickness 6.40 mm
|
270
°F <br>@Thickness 0.252 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics Lexan® FXE154 PC
FDA compliant (color limited) PC. 2.5 MFR. Potable water/extrusion blowmoldable. ILLUMINATE special effects (fluorescent/edge glow colors).
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
132
°C <br>@Thickness 3.20 mm
|
270
°F <br>@Thickness 0.126 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics Lexan® HP3AEU PC (Europe-Africa-Middle East)
Lexan HP3AEU resin is a medium flow polycarbonate with mold release designed for medical devices and pharmaceutical applications. It is assessed with biocompatible ISO10993 (or USP Class VI) and is..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
132
°C <br>@Thickness 6.40 mm
|
270
°F <br>@Thickness 0.252 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics Lexan® LS2 PC (Asia Pacific)
Automotive lens applications. Medium viscosity. UV-stabilized. Transparent colors only.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
132
°C <br>@Thickness 6.40 mm
|
270
°F <br>@Thickness 0.252 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics Lexan® ML6076 PC
Passes FAR 25.853: 60 seconds at 30 mil.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 132 °C | 270 °F | Edgew 120*10*4 sp=100mm; ISO 75/Ae |
|
SABIC Innovative Plastics Lexan® ML7667 PC Copolymer
Lexan* ML7667 specialty polycarbonate (PC) resin is a 9% GF reinforced, UV stabilized, flame retarded injection molding grade. This medium flow specialty PC resin combines UL94 V0 @ 1.5mm, 5VB @ 3..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
132
°C <br>@Thickness 6.40 mm
|
270
°F <br>@Thickness 0.252 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics Lexan® OQ4620R PC
Optical grade with UV cut-off up to 400 nm, greater optical purity than standard grades. For needs of sunglass and sunvisor markets.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 132 °C | 270 °F | Flatw 80*10*4 sp=64mm; ISO 75/Af |
|
SABIC Innovative Plastics Lexan® XHT1143 PC (Europe-Africa-Middle East)
XHT1143 is a high flow, UV stabilized, high heat polycarbonate copolymer. It is the lowest heat, UV stabilized product in the LEXAN* XHT portfolio. It is available in a range of opaque and limited ..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
132
°C <br>@Thickness 3.20 mm
|
270
°F <br>@Thickness 0.126 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics LNP LUBRICOMP DL001 PC (Asia Pacific)
LNP* Lubricomp* DL001 is a compound based on Polycarbonate resin containing PTFE. Added features of this material include: Internally Lubricated.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
132
°C <br>@Thickness 6.40 mm
|
270
°F <br>@Thickness 0.252 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics Lexan® 141 PC (Asia Pacific)
Nonhalogenated. 10.5 MFR.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
132
°C <br>@Thickness 6.40 mm
|
270
°F <br>@Thickness 0.252 in
|
unannealed; ASTM D 648 |
|
SABIC Innovative Plastics Lexan® 141S PC (Asia Pacific)
Nonhalogenated. 10.5 MFR. Internal mold release.This data was supplied by SABIC-IP for the Asia Pacific region.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
132
°C <br>@Thickness 3.20 mm
|
270
°F <br>@Thickness 0.126 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics Lexan® HP3REU PC (Europe-Africa-Middle East)
Medium flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO and steam sterilizable. Contains mold ..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
132
°C <br>@Thickness 6.40 mm
|
270
°F <br>@Thickness 0.252 in
|
ASTM D648 |
|
Kingfa JH710 G20 Flame Retardant & 20% Glass Fiber Reinforced PC
Features:Environmental friendly flame retardantUL V-0 @ 1.6mmHigh mechanical strengthGood size stability, good surfaceSuitable for exact moldingApplications:CD-ROM, DVDPrinter, photocopier cabinetSc..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 132 °C | 270 °F | Unannealed; ASTM D648 |
|
Techmer ES HiFill® PA6 GF/M15 A1 BK 15% Glass/Mineral Filled
Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass/Mineral, 15% Filler by WeightAdditive: Heat StabilizerFeatures: Heat Stabilized Appearance: BlackInformation provided by TP Compo..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
132
°C <br>@Thickness 6.40 mm
|
270
°F <br>@Thickness 0.252 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics NORYL PX1278 PPE+PS
Primarily EXTRUSION material. Automotive. Passes FMVSS 302. Heat resistance of 130 C (266 F).
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
132
°C <br>@Thickness 3.20 mm
|
270
°F <br>@Thickness 0.126 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics LNP THERMOCOMP DB008ERP PC (Asia Pacific)
LNP* Thermocomp* DB008ERP is a compound based on Polycarbonate resin containing Glass Bead. Added features of this material include: Easy Molding, Mold Release.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 132 °C | 270 °F | Unannealed; ASTM D648 |
|
Covestro Makrolon® 3258 Polycarbonate, General Purpose, Mold Release, Biocompatibility
It is the responsibility of the medical device, biological product, or pharmaceutical manufacturer (Manufacturer) to determine the suitability of all component parts and raw materials, including the..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 132 °C | 270 °F | ASTM D648 |
|
RheTech Products G20P100-406 20% Glass Fiber Reinforced Polypropylene, UV Stabilized, (Ford ZUEA) Midnight Black
Applications: Arm rest insertVacuum canisterStorage binConsolesBattery traysInjection molding conditions reported in table.Information provided by RheTech Products.
|
|||
Copyright © lookpolymers.com All Rights Reserved