Polymer Property : Deflection Temperature at 1.8 MPa (264 psi) = 140 °F Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	ISO.75 DIN.53461
Omnia Plastica PVC Polyvinylchloride A widely used material, its application is under regulation in many countries for ecological reasons and it is often substituted by PP or other polymers. It is chosen for its chemical resistance.Fea..
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	75/Method Af
Premix Thermoplastics PRE-ELEC® PA 1412 Conductive Thermoplastic Compound PRE-ELEC® PA 1412 is a conductive thermoplastic compound based on polyamide 6. Conductivity is achieved by using conductive carbon black. In addition to a low electrical resistivity PRE-ELEC® PA 1..
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	ISO 75
Nilit FRIANYL B63 S10 Nylon 6 for injection molding Nylon 6 for injection molding, impact modified.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	ISO 75
Nilit FRIANYL B63 S20 Nylon 6 for injection molding Nylon 6 for injection molding, impact modified.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	120°C/h; ISO 75/1
Polykemi AB POLYshine PBT D221 PBT, Impact Modified Information provided by Polykemi AB
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	ASTM D648
Polymer Resources TP-GP2 Polybutylene Terephthalate, General Purpose Polybutylene Terephthalate, General Purpose Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provid..
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	Annealed; ISO 75-1/-2
DuPont Performance Polymers Crastin® S620F20 BK851 PBT (Unverified Data**) Crastin® S620F20 BK851 is an unreinforced, nucleated, lubricated, medium viscosity, black polybutylene terephthalate resin for fast injection molding.Information provided by DuPont Performance Poly..
Deflection Temperature at 1.8 MPa (264 psi)	60.0 Â°C	140 Â°F
Aardvark Polymers AardalloyÂ® 3300 POM Alloy Rotational Molding Resin Aardalloy 3300 is an acetal alloy formulated for enhanced impact resistance and elongation.Aardalloy 3300 maintains the high degree of chemical resistance and low fuel permeation rates of unfilled a..
Deflection Temperature at 1.8 MPa (264 psi)	60.0 Â°C	140 Â°F	ASTM D648
Kolon SPESINÂ® KP513UG PBT Alloy Resin Extrudable, delusteringApplications: Mono filamentInformation provided by API-Kolon.
Deflection Temperature at 1.8 MPa (264 psi)	60.0 Â°C	140 Â°F
LATI LateneÂ® 7H2-V2HF PP Homopolymer, Heat Stabilized, Flame Retardant Polypropylene homopolymer (PPh) based compound. Heat stabilized. UL94 V-2 classified, halogens-based flame retardants free.Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; No..
Deflection Temperature at 1.8 MPa (264 psi)	60.0 Â°C @Thickness 3.20 mm	140 Â°F @Thickness 0.126 in	ASTM D648
SABIC Innovative Plastics SABIC PPCOMPOUND 7985 PP SABICÂ® PPcompound 7985 is a mineral filled, impact modified polypropylene TPO. This material combines scratch resistance and heat stability with interior automotive UV stability. The IMDS is 2097..
Deflection Temperature at 1.8 MPa (264 psi)	60.0 Â°C	140 Â°F	Unannealed; ASTM D648
Techmer ES ElectrablendÂ® PA12 CB Availability: North AmericaForms: PelletsAdditive: Carbon BlackFeatures: ConductiveAppearance: BlackTPCI# 9874105Information provided by TP Composites, Inc.
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	DIN 53461
Polyram PlusTek PB891 Nylon 6, Impact Modified Impact modified polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Deflection Temperature at 1.8 MPa (264 psi)	>= 60.0 °C	>= 140 °F	ASTM D648
A. Schulman POLYFORT™ PP 2801 Homopolymer Polypropylene DescriptionPolyfort® PP 2801 is a 12 melt flow homopolymer polypropylene based on the same ingredients as Eastman P4G4Z-001. It is compounded on equipment and under conditions as close as possible..
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	ASTM D648
A. Schulman POLYFORT™ FPP1666 Talc Filled Homopolymer Polypropylene DescriptionPolyfort® FPP 1666 is a 10% talc filled homopolymer polypropylene compound. Information provided by A. Schulman.
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	ISO 75-1/-2
Covestro Makroblend® S 7916 Polycarbonate + PBT, Impact Grade ISO 7792-1-PBT/PC,MHPR,-020(PBT+PC)-blendsimpact modifiedInjection molding gradeexcellent chemical resistancehigh toughness at low temperaturesideal for painted applicationsunreinforcedPreprocessing..
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	Edgew 120x10x4, sp=100 mm; ISO 75/Ae
Eurostar Staramide B28H PA6, Heat Stabilized, Injection Molded Staramide B28H is a Heat Stabilized, Unreinforced Polyamide 6, Injection Molding ResinInformation provided by Eurostar.
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	ASTM D648
Clariant Renol 6253 Nylon 6, High Impact Data provided by Clariant Masterbatches
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	ASTM D648
E-Polymers TEKAMID® TB120L NCR , High Crystallinity PA6, DAM Precise injection, high crystallinityInformation provided by E-Polymers Co. Ltd.
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F
Aclo Accutech Polypropylene Copolymer HP0334W10L Wollastonite Reinforced
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F
Aclo Accutech Polypropylene Homopolymer HP0334C30L Calcium Reinforced
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	ISO 75-2/A
Cathay PA510 Renewable Engineering Polyamide Cathay engineering polyamides contain 26-100% renewably sourced material. Advantages: Operates at similar conditions to PA66; Suitable for injection, compounding and extrusion; Stable mechanical pr..
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	ISO 75
BASF Ultramid® 8202 PA6 (Dry) Ultramid 8202 is a low viscosity, general purpose polyamide 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It is also available in heat stabilized (Ult..
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	ASTM D-648
Axiall 3802 Vinyl Foam, Extrusion Georgia Gulf 3801, 3802, and 3803 are vinyl foam compounds designed for applications requiring lower density than standard rigid vinyls.Information provided by Georgia GulfGeorgia Gulf became Axiall..
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F
BASF Novolen® 1100 VC Polypropylene Data was collected by ISO methods and provided by BASF.
Deflection Temperature at 1.8 MPa (264 psi)	60.0 - 190 °C	140 - 374 °F	Average value: 131 °C Grade Count:211
Overview of materials for Polypropylene with 20% Glass Fiber Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 20% Glass Fiber Filler". Specific grades with glass content between 15% and 24% are i..
Deflection Temperature at 1.8 MPa (264 psi)	60.0 - 128 °C	140 - 262 °F	Average value: 78.0 °C Grade Count:18
Overview of materials for Polypropylene, Wood Filled This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene, Wood Filled". Each property range of values reported is minimum and maximum values of app..
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	ASTM D648
Samyang Tribit® 1800 PBT, High Viscosity Crystallization is fast, formability is excellent and thermal resistance, chemical resistance, electrical properties and abrasion resistance are excellent.1800 is a high viscosity grade.Information ..