Polymer Property : Deflection Temperature at 1.8 MPa (264 psi) = 151 °F Product List

Thermal Properties

Tips: 30 items are displayed at most.

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	66.1 °C @Thickness 3.18 mm	151 °F @Thickness 0.125 in	Unannealed; ASTM D648
PolyOne Geon™ Vinyl Packaging 161J1-3V Polyvinyl Chloride, Rigid (PVC, Rigid) Information provided by PolyOne
Deflection Temperature at 1.8 MPa (264 psi)	66.0 °C	151 °F	120°C/h; ISO 75/1
Polykemi AB POLYfill PP CIP6015F Polypropylene, Mineral Reinforced Information provided by Polykemi AB
Deflection Temperature at 1.8 MPa (264 psi)	66.0 °C	151 °F	120°C/h; ISO 75/1
Polykemi AB POLYfill PPH GK8020D Polypropylene Homopolymer, Glass Reinforced, Detergent Resistant Information provided by Polykemi AB
Deflection Temperature at 1.8 MPa (264 psi)	66.0 °C	151 °F	120°C/h; ISO 75/1
Polykemi AB SCANCOMP PP BN140 T5 Polypropylene Information provided by Polykemi AB
Deflection Temperature at 1.8 MPa (264 psi)	66.0 °C @Thickness 3.20 mm	151 °F @Thickness 0.126 in	unannealed; ASTM D 648
SABIC Innovative Plastics LNP Konduit MT00EL PP LNP* Konduit* MT00EL is a Polypropylene base resin with thermal fillers. Characteristics of this grade are Thermal Conductivity and it is Low Extraactible.This data was supplied by SABIC-IP for th..
Deflection Temperature at 1.8 MPa (264 psi)	66.0 °C	151 °F
Eastman Eastar DN007 PCTG Copolyester  (discontinued **) ISO data as provided by the manufacturer, Eastman Chemical
Deflection Temperature at 1.8 MPa (264 psi)	66.0 Â°C	151 Â°F	ASTM D648
Ineos BarexÂ® 218 E Acrylonitrile-Methyl Acrylate Copolymer Extrusion Grade. BarexÂ® Resins are available in either natural or blue tint. BarexÂ® 218E is most commonly used for thermoformed sheet applications in which high impact performance is require..
Deflection Temperature at 1.8 MPa (264 psi)	66.0 Â°C	151 Â°F	ISO 75-1,-2
Gromax BTE90-DN001N1 Nylon 6 (Dry) Information provided by Gromax Enterprises Corp.
Deflection Temperature at 1.8 MPa (264 psi)	66.2 Â°C	151 Â°F	unannealed; ASTM D648
KYDEXÂ® XD 3D Laminate Thermoplastic 3D Laminate for Flat Lamination and Membrane Pressed Uses Features:Tough and durableResistant to cracking and chippingSolid, integral color3500+ custom colorsResistant to a wide range of chemicalsAbrasion resistantFire retardantExcellent fabrication qualit..
Deflection Temperature at 1.8 MPa (264 psi)	66.0 Â°C	151 Â°F	ISO 75-1/-2
Lanxess DurethanÂ® B 30 S FN40 000000 Nylon 6 PA 6, injection molding grade, non- reinforced, good flowability, easy-release, fast cycling, UL 94V-2 off 0,75 mm, GWIT 775Â°C bei 0,75/1,5mm
Deflection Temperature at 1.8 MPa (264 psi)	66.0 Â°C	151 Â°F	ISO 75-1,-2
Lanxess DurethanÂ® BC 30 S 000000 Nylon 6 PA 6, non-reinforced, injection moldingInformation provided by LANXESS.
Deflection Temperature at 1.8 MPa (264 psi)	66.0 Â°C	151 Â°F	Flatw 80104 sp=64mm; ISO 75/Af
SABIC Innovative Plastics NORYL WCV063 PPE+SEBS+Polyolefin (Europe-Africa-Middle East) Flexible, non-halogenated FR, mPPE extrusion grade material for evaluation in automotive wire coating applications requiring ISO6722.
Deflection Temperature at 1.8 MPa (264 psi)	66.0 Â°C	151 Â°F	Flatw 80104 sp=64mm; ISO 75/Af
SABIC Innovative Plastics LNP LUBRICOMP RP003 PA 66 LNP* LUBRICOMP* RP003 is a compound based on Nylon 66 resin containing 15% PTFE/Silicone. Added feature of this material is: Wear Resistant.
Deflection Temperature at 1.8 MPa (264 psi)	66.0 Â°C	151 Â°F	ASTM D 648
Shakespeare Isocorâ„¢ SVP6105 medium viscosity PA-610 Isocorâ„¢ 6105 is a medium viscosity PA-610. This resin is specifically suited for applications requiring low moisture absorption and greater dimensional stability. Isocorâ„¢ 6105 is also ..
Deflection Temperature at 1.8 MPa (264 psi)	66.0 Â°C	151 Â°F	Flatw 80104 sp=64mm; ISO 75/Af
SABIC Innovative Plastics LNP Thermocomp MB006SU PP (Europe-Africa-Middle East) LNP* THERMOCOMP* MB006SU is a compound based on Polypropylene resin containing Glass Bead. Added features include: Heat Stabilized, UV-Stabilized.This data was supplied by SABIC-IP for the Europe-Af..
Deflection Temperature at 1.8 MPa (264 psi)	66.0 Â°C @Thickness 3.20 mm	151 Â°F @Thickness 0.126 in	unannealed; ASTM D648
SABIC Innovative Plastics LNP THERMOCOMP WX02869H Polyester, TP LNP THERMOCOMP* WX02869H is a compound based on Polyester, TP resin containing High Specific Gravity. Added features of this material include: High Impact.
Deflection Temperature at 1.8 MPa (264 psi)	66.0 °C	151 °F	ISO 75-1/-2
Unitika A1025NO PA6, Flame Retardant, Dry Information provided by Unitika Ltd.
Deflection Temperature at 1.8 MPa (264 psi)	66.0 °C	151 °F	ASTM D648
A. Schulman POLYFORT™ FXP 2600-3120 CaC02 Filled Homopolymer Polypropylene DescriptionPolyfort® FXP 2600-3120 is a 20% GAC02 filled homopolymer polypropylene compound.Information provided by A. Schulman.
Deflection Temperature at 1.8 MPa (264 psi)	66.0 °C	151 °F	ASTM D648
Formosa Plastics Formolene® 5144L Homopolymer Polypropylene Homopolymer for Injection Molded Applications requiring Heat Resistance Formolene® 5144L is a highly isotactic, nucleated polypropylene homopolymer designed for consumer products and appliance appl..
Deflection Temperature at 1.8 MPa (264 psi)	66.0 °C	151 °F	ISO 75-2
Borealis MS64T20 Polypropylene Compound, Mineral Filled MS64T20 is a 20% mineral filled polypropylene compound intended for injection molding. This material has excellent balanced mechanical properties and is easy to process. Applications: automotive p..
Deflection Temperature at 1.8 MPa (264 psi)	66.0 °C	151 °F	ASTM D648
Eastman DuraStar MN631 Polymer, Natural Durastar Polymer MN631 contains a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing char..
Deflection Temperature at 1.8 MPa (264 psi)	66.0 °C	151 °F	ASTM D648
Eastman Eastar AN011 Copolyester Eastar AN011 copolyester is a high flow product. Eastar AN011 flow lengths are increased 20-40% relative to Eastar AN001 as shown by spiral flow testing. Other outstanding features of Eastar are eas..
Deflection Temperature at 1.8 MPa (264 psi)	66.0 °C	151 °F
Eastman Eastar DN001 PCTG Copolyester ISO data as provided by the manufacturer, Eastman Chemical
Deflection Temperature at 1.8 MPa (264 psi)	66.0 °C	151 °F	Flatw 80x10x4, sp=64 mm; ISO 75/Af
Eurostar Starpylen MB006SU PP, Glass Bead Filled, Injection Molding Resin Starpylen MB006SU is a Glass Bead Reinforced Polypropylene Injection Molding ResinInformation provided by Eurostar.
Deflection Temperature at 1.8 MPa (264 psi)	66.1 °C	151 °F
Aclo Accutech Polypropylene Copolymer CP0436W40L Wollastonite Reinforced
Deflection Temperature at 1.8 MPa (264 psi)	66.1 °C	151 °F	ASTM D-648
Axiall 7801 Rigid PVC, Extrusion, White, High Impact Profile Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013.
Deflection Temperature at 1.8 MPa (264 psi)	66.0 °C	151 °F	ASTM D648
Ashley Polymers Ashlene® R3137 BK PC/PBT A thermoplastic alloy offering a high level of chemical resistance combined with high impact and excellent mechanical properties. Black.Data provided by the manufacturer
Deflection Temperature at 1.8 MPa (264 psi)	66.0 °C	151 °F	ASTM D648
Adell RA-16 Copolymer Polypropylene, 30% Talc Filled Data provided by Adell Plastics, Inc.
Deflection Temperature at 1.8 MPa (264 psi)	66.0 - 82.7 °C	151 - 181 °F	Average value: 74.4 °C Grade Count:11
Overview of materials for ABS/PVC Alloy This property data is a summary of similar materials in the MatWeb database for the category "ABS/PVC Alloy". Each property range of values reported is minimum and maximum values of appropriate MatW..
Deflection Temperature at 1.8 MPa (264 psi)	66.0 °C	151 °F	ASTM D 648
Shakespeare Isocor™ HW29TL Nylon 610 Isocor™ HW29TL is an ultra low viscosity PA-610 with excellent melt flow characteristics. Isocor™ HW29TL is specifically formulated for thin wall or high speed injection molding applications. ..