- HOME
- POLYMER SEARCH
- Polymer Property : Deflection Temperature at 1.8 MPa (264 psi) = 158 °F
Polymer Property : Deflection Temperature at 1.8 MPa (264 psi) = 158 °F Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | ASTM D648-95 |
|
Multibase Multi-Pro® 3018 CU Dark Green 30% Filler Content Polypropylene
Data provided by Multibase.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | STN EN ISO 75-2 (A) |
|
Plastcom PLASTAMID® 66 BT B 27 TS PA66 heat stabilized
Basic type PA66 for injection molding, heat stabilized, modified for general use, with excellent manufacturing properties. Use: automotive, engineering, electrical and consumer-goods industry - elec..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | |
|
Plastcom SLOVAMID 66 LI PA66, improved strength
FeaturesModified with thermoplastic reactive caoutchouc, determined for mouldings with high toughness also at minus temperatures. Eligible application for ski-shoes, helmets for sport and other safe..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | 4 mm thick;10.0 mm wide molded rod; ISO 75/Method Af |
|
Premix Thermoplastics PRE-ELEC® ESD 7120
PRE-ELEC ESD 7120 is a static dissipative thermoplastic compound based on ABS. The dissipative property is permanent and built into the polymer chain. PRE-ELEC ESD 7120 has been developed for inject..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | ISO 75 |
|
Nilit FRIANYL A63 TF10 Nylon 6.6 for injection molding, 10% PTFE lubricated
Nylon 6.6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | ISO 75 |
|
Nilit FRIANYL B63 K Nylon 6 for injection molding
Nylon 6 for injection molding, specially formulated for knobs.Information provided by Frisetta Polymer, which merged into Nilit Plastics
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | DIN 53461 |
|
Qualchem Danamid FEH Polyamide 6
Heat stabilized type polyamide, for long-lasting use at 120-130°CInformation provided by Qualchem Zrt.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | DAM; ISO 75-1/-2 |
|
DuPont Performance Polymers Zytel® E51HSB NC010 Nylon 66
(Unverified Data**)
Zytel® E51HSB NC010 is a high molecular weight, heat stabilized polyamide 66 resin for injection molding and extrusion.Information provided by DuPont Performance Polymers
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | ISO 75-1/-2 |
|
Lanxess Durethan® A 30 H2.0 901510 Nylon 66
PA 66 standard injection molding grade, non-reinforced, very easy release, good heat-ageing resistanceApplication Examples: terminal blocks, cable clips, bobbins, gearwheels
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | |
|
LATI Laticonther 83 CP/80 PA12, Impact Modified
High thermal conductivity product based on Polyamide 12 (PA12), impact modified. Special filler. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation pro..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
70.0
°C <br>@Thickness 3.20 mm
|
158
°F <br>@Thickness 0.126 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics LNP LUBRICOMP RL004S PA 66
LNP LUBRICOMP* RL004S is a compound based on Nylon 66 resin containing 20% PTFE. Added features of this material include: Heat Stabilized, Wear Resistant.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
70.0
°C <br>@Thickness 3.20 mm
|
158
°F <br>@Thickness 0.126 in
|
unannealed; ASTM D648 |
|
SABIC Innovative Plastics Valox® EH7020HF PBT+PET
Valox EH7020HF is a mineral filled PBT/PET that offers good surface appearance, high flow and good heat performance. EH7020HF was developed for automotive bezel application that requires basecoat + ..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | ASTM Test |
|
Styrolution Styrolux 684D SBC
Styrolux 684D is a thermoplastic styrene-butadiene block copolymer which is suitable for injection molding, extrusion, and thermoforming. It offers an outstanding combination of crystal clarity and..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | ASTM D648 |
|
Shinkong Synthetic Fibers Shinite® D202 PBT, Fire Retardant
Information from Shinkong Synthetic Fibers Corp.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | ASTM D648 |
|
A. Schulman SCHULAMID® 66 MV3H Unreinforced Nylon 6/6
Information provided by A. Schulman.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | ISO 179 |
|
CP-Polymer-Technik Wellamid® 6000 MR 309 HWCP Mineral Nylon 6, Heat Stabilized, Dry
Information provided by CP-Polymer-Technik GmbH & Co. KG
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | ISO 179 |
|
CP-Polymer-Technik Wellamid® 6000 SCP Nylon 6, Finely Crystalline, Dry
Information provided by CP-Polymer-Technik GmbH & Co. KG
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | ISO 75-2/AF |
|
Addiplast Addilene H 490 M10F Flame Retardant Polypropylene, 10% Mineral Filled
Flame retardant, mineral filled, with halogensInformation provided by Addiplast.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | ISO 75-2/AF |
|
Addiplast Addinyl B2 1 Flame Retardant Nylon 6
Flame retardant, halogen freeInformation provided by Addiplast.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | |
|
BASF Polystyrol® 144 C Polystyrene (Europe)
Very easy flowing grade, often blended with impact-modified Polystyrol or used as a coextruded glossy layer.Data was collected by ISO methods and provided by BASF.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | Unannealed; ISO 75-2/A |
|
Ascend Performance Materials Vydyne® 21SPC1 Nylon 66, DAM
Vydyne® 21SPC1 is a general-purpose, improved-flow, lubricated PA66 resin available in natural color. 21SPC1 offers a balanced combination of properties characterized by high strength, rigidity, go..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | |
|
Aclo Accutech Polypropylene Copolymer CP0436M30L Mica Reinforced |
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | ISO 75-2/A |
|
Ascend Performance Materials Vydyne® 66R Nylon 66, General Purpose, high viscosity, DAM
Vydyne® 66R is a high-viscosity, heat-stabilized PA66 resin suitable for injection-molding and extrusion applications. It is available in natural color only. Vydyne 66R resin offers high strength, ..
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | DAM; ISO 75-1/-2 |
|
DuPont Performance Polymers Zytel® 101L BKB080 Nylon 66
(Unverified Data**)
Unreinforced Polyamide 66Zytel 101L BKB080 is a lubricated polyamide 66 resin for injection molding.Information provided by DuPont Performance Polymers
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
70.0
°C <br>@Thickness 3.18 mm
|
158
°F <br>@Thickness 0.125 in
|
Unannealed; ASTM D648 |
|
PolyOne Geon™ Vinyl Rigid Extrusion L5880 Polyvinyl Chloride, Rigid (PVC, Rigid)
The Cell Classification was determined using the notched Izod test with injection molded samples.Information provided by PolyOne
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) |
70.0
°C <br>@Thickness 3.18 mm
|
158
°F <br>@Thickness 0.125 in
|
Unannealed; ASTM D648 |
|
PolyOne Geon™ Vinyl Rigid Extrusion L6181 Polyvinyl Chloride, Rigid (PVC, Rigid)
Information provided by PolyOne
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | |
|
BASF Procom® D 1026 Polypropylene
Data was collected by ISO methods and provided by BASF.
|
|||
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | 80x10x4mm; ISO 75-2/Af |
|
SYNTHOS Krasten® 336M High Impact Polystyrene
Easy flow grade. Processed by injection moulding of intricate and thin-walled products that enables high production output.Synthos was formerly known as Kaucuk. All information provided by Synthos.
|
|||
Copyright © lookpolymers.com All Rights Reserved