- HOME
- POLYMER SEARCH
- Polymer Property : CTE, linear = 13.9 µin/in-°F
Polymer Property : CTE, linear = 13.9 µin/in-°F Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 25.0 µm/m-°C | 13.9 µin/in-°F | ISO 11359-1/-2 |
|
Polyplastic Armamid® PA GF50-1 Nylon 6, 50% Glass Fiber
High stiffnessInformation provided by PolyPlastic Group.
|
|||
| CTE, linear | 25.0 µm/m-°C | 13.9 µin/in-°F | X; IPC-TM-650.2.4.41 |
|
Park Electrochemical Nelco® NX9320 PTFE Laminate, Woven-Glass Reinforced
The N9000 PTFE laminate system is designed for critical microwave components, antennas, power amplifiers and subassemblies. Superior mechanical and electrical performance make the N9000 PTFE laminat..
|
|||
| CTE, linear | 25.0 µm/m-°C | 13.9 µin/in-°F | X; IPC-TM-650.2.4.41 |
|
Park Electrochemical Nelco® NY9220 PTFE Laminate, Woven-Glass Reinforced
The N9000 PTFE laminate system is designed for critical microwave components, antennas, power amplifiers and subassemblies. Superior mechanical and electrical performance make the N9000 PTFE laminat..
|
|||
| CTE, linear | 25.0 µm/m-°C | 13.9 µin/in-°F | ASTM D696 |
|
Solvay Specialty Polymers Torlon® 4301 Polyamide-imide (PAI)
(Unverified Data**)
Torlon 4301 is a wear-resistant grade of polyamide-imide (PAI) resin. It has a good balance of mechanical properties and wear resistance. It offers high flexural and compressive strength with a low ..
|
|||
| CTE, linear | 25.0 µm/m-°C | 13.9 µin/in-°F | ASTM D696 |
|
Kolon KOCETAL® GF105 G/F Reinforced Acetal Resin
Glass fiber reinforced, improved stiffness. Applications: Products for high stiffness, improved fatigue properties. Information provided by API-Kolon.
|
|||
| CTE, linear |
25.0
µm/m-°C @Temperature 20.0 °C |
13.9
µin/in-°F @Temperature 68.0 °F |
|
|
Indium Corp. Indalloy® 106 (Sn63) Sn-Pb Solder Alloy
Standard eutectic tin-lead solder with wide application. Not recommended against silver and/or gold.Information provided by the manufacturer, Indium Corporation.
|
|||
| CTE, linear | 25.0 µm/m-°C | 13.9 µin/in-°F | ASTM D696 |
|
Lord Adhesives Thermosetâ„¢ EP-830 Ignition Coil Impregnating and Encapsulation Epoxy
Lord EP-830 is a heat curing, two component epoxy formulation designed especially for use in automotive high voltage ignition coils where adhesion to segmented bobbins is critical. The combination o..
|
|||
| CTE, linear | 25.0 µm/m-°C | 13.9 µin/in-°F | DIN 53752 |
|
Lehmann & Voss LUVOCOM® 1-1129 Polyamide 66, with glass fiber, PTFE, lubricant modified, heat stabilized
Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.Strong, stiff parts.Bearings, ..
|
|||
| CTE, linear |
25.0
-
45.0
µm/m-°C @Temperature -30.0 - 30.0 °C |
13.9
-
25.0
µin/in-°F @Temperature -22.0 - 86.0 °F |
TMA |
|
SABIC Innovative Plastics NORYL NC212 PPE+HIPS (Asia Pacific) |
|||
| CTE, linear |
25.0
-
35.0
µm/m-°C @Temperature -30.0 - 30.0 °C |
13.9
-
19.4
µin/in-°F @Temperature -22.0 - 86.0 °F |
TMA |
|
SABIC Innovative Plastics NORYL CN1134 PPE+PS (Asia Pacific)
20% filled FR high modulus PPE/PS blend
|
|||
| CTE, linear |
25.0
-
55.0
µm/m-°C @Temperature -30.0 - 30.0 °C |
13.9
-
30.6
µin/in-°F @Temperature -22.0 - 86.0 °F |
TMA |
|
SABIC Innovative Plastics NORYL GTX APS130 PPE+PPS (Asia Pacific)
PPE+PPS GF30%
|
|||
| CTE, linear |
25.0
µm/m-°C @Temperature -30.0 - 30.0 °C |
13.9
µin/in-°F @Temperature -22.0 - 86.0 °F |
D696 |
|
Zhejiang Juner 201-G30 30% Glass Fibre Reinforced
Applications: Electrons and Electricity: TV Components, Plugs of Computers, Exhaust Fans of Computers, Plugs, Sockets, Shells of Electronics, Framework of Level Output Transformers, Pipe Pedestals, ..
|
|||
| CTE, linear |
25.0
µm/m-°C @Temperature -30.0 - 30.0 °C |
13.9
µin/in-°F @Temperature -22.0 - 86.0 °F |
D696 |
|
Zhejiang Juner 301-G30 30% Glass Fibre Reinforced and Flammable Resistant
Applications: Electrons and Electricity: TV Components, Plugs of Computers, Exhaust Fans of Computers, Plugs, Sockets, Shells of Electronics, Framework of Level Output Transformers, Pipe Pedestals, ..
|
|||
| CTE, linear | 25.0 µm/m-°C | 13.9 µin/in-°F | Below Tg |
|
Tra-Con Tra-Bond GA47-2LV Instrument Adhesive
TRA-BOND GA47-2LV low viscosity adhesive is designed for guidance instrument applications. This adhesive exhibits excellent compatibility with conventional gyro flotation fluids. TRA-BOND GA47-2LV a..
|
|||
| CTE, linear |
25.0
µm/m-°C @Temperature 23.0 - 80.0 °C |
13.9
µin/in-°F @Temperature 73.4 - 176 °F |
DIN 53752 |
|
CP-Polymer-Technik Wellamid® 6000 MRGV 25/15 HWCP 25% Mineral and 15% Glass Fiber Nylon 6, Heat Stabilized, Dry
Information provided by CP-Polymer-Technik GmbH & Co. KG
|
|||
| CTE, linear |
25.0
µm/m-°C @Temperature -30.0 - 30.0 °C |
13.9
µin/in-°F @Temperature -22.0 - 86.0 °F |
ASTM D696 |
|
Beijing Chemical Industry KAIFA® 201-G30 PBT Resin
30% glass fiber reinforcedInformation provided by Beijing Chemical Industry Research Institute (Group)
|
|||
| CTE, linear |
25.0
µm/m-°C @Temperature 23.0 - 80.0 °C |
13.9
µin/in-°F @Temperature 73.4 - 176 °F |
DIN 53752 |
|
CP-Polymer-Technik Wellamid® 6000 CF 30 HWCP 30% Carbon Fiber Nylon 6, Heat Stabilized, Dry
Information provided by CP-Polymer-Technik GmbH & Co. KG
|
|||
| CTE, linear | 25.0 µm/m-°C | 13.9 µin/in-°F | DIN 53752 |
|
Lehmann & Voss LUVOCOM® 1-7003 Polyamide 66, with carbon fiber and PTFE, heat stabilized
Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.High-strength and high-stiff parts; low coefficient of expansion.Electrically conductive, suita..
|
|||
| CTE, linear | 25.0 µm/m-°C | 13.9 µin/in-°F | ASTM E831 |
|
Addiplast Addinyl B2 V40 Nylon 6, 40% Glass Filled
Glass fiber reinforced, high strengthInformation provided by Addiplast.
|
|||
| CTE, linear |
25.0
-
25.0
µm/m-°C @Temperature 140 - 180 °C |
13.9
-
13.9
µin/in-°F @Temperature 284 - 356 °F |
Average value: 25.0 µm/m-°C Grade Count:1 |
|
Overview of materials for Polysulfone, 30% Glass Fiber Reinforced
This property data is a summary of similar materials in the MatWeb database for the category "Polysulfone, 30% Glass Fiber Reinforced". Specific grades with glass content between 25% and 34% are inc..
|
|||
| CTE, linear |
25.0
-
55.0
µm/m-°C @Temperature -30.0 - 30.0 °C |
13.9
-
30.6
µin/in-°F @Temperature -22.0 - 86.0 °F |
TMA |
|
SABIC Innovative Plastics NORYL APS130 PPE+PPS (Asia Pacific) |
|||
Copyright © lookpolymers.com All Rights Reserved