- HOME
- POLYMER SEARCH
- Polymer Property : CTE, linear = 41.7 µin/in-°F
Polymer Property : CTE, linear = 41.7 µin/in-°F Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear |
75.0
µm/m-°C @Temperature 23.0 - 100 °C |
41.7
µin/in-°F @Temperature 73.4 - 212 °F |
|
|
Quadrant EPP Fluorosint® HPV PTFE + additives, bearing grade, compression moulded (ISO Data)
FDA compliant Fluorosint HPV is a high performance Fluorosint bearing grade, optimized for high pressure-velocity capabilities and very low wear. Fluorosint HPV was developed for bearing application..
|
|||
| CTE, linear |
75.0
µm/m-°C @Temperature 20.0 °C |
41.7
µin/in-°F @Temperature 68.0 °F |
NOVA Chemicals Laboratory Procedure |
|
NOVA Chemicals DYLARK® 480 Impact Grade Engineering Resin
Features:High heat resistance Good chemical resistance High impact strength Excellent flow characteristicsApplications:Automotive interior trim applications Automotive consoles Structural HousingsIn..
|
|||
| CTE, linear |
75.0
µm/m-°C @Temperature 20.0 °C |
41.7
µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
|
Eastman Eastar 5445 PCTG Copolyester, Injection Molded
(discontinued **)
Eastar PCTG 5445 is an amorphous copolyester. Because of its clarity, toughness and good melt strength, Eastar PCTG Copolyester 5445 is useful in a number of applications. It has high gloss and is t..
|
|||
| CTE, linear |
75.0
µm/m-°C @Temperature 20.0 °C |
41.7
µin/in-°F @Temperature 68.0 °F |
|
|
Ineos Nova 4214 Medium Impact Polystyrene
(discontinued **)
Excellent balance of properties, USP Class VIApplications: Consumer electronics, Injection molding applicationsProperties were determined on injection molded specimens at 23°C and 50% R.H. unless o..
|
|||
| CTE, linear | 75.0 - 790 µm/m-°C | 41.7 - 439 µin/in-°F | Average value: 294 µm/m-°C Grade Count:20 |
|
Overview of materials for Polytetrafluoroethylene (PTFE), Extruded
This property data is a summary of similar materials in the MatWeb database for the category "Polytetrafluoroethylene (PTFE), Extruded". Each property range of values reported is minimum and maximum..
|
|||
| CTE, linear | 75.0 - 150 µm/m-°C | 41.7 - 83.3 µin/in-°F | Average value: 108 µm/m-°C Grade Count:3 |
|
Overview of materials for Polytetrafluoroethylene (PTFE), Carbon Fiber Filled
This property data is a summary of similar materials in the MatWeb database for the category "Polytetrafluoroethylene (PTFE), Carbon Fiber Filled". Each property range of values reported is minimum ..
|
|||
| CTE, linear |
75.0
µm/m-°C @Temperature 20.0 °C |
41.7
µin/in-°F @Temperature 68.0 °F |
|
|
Ineos Nova 6201 Super High Impact Polystyrene
Good toughness, Deep draw, Easy processing using all conventional methodsApplications: Thermoformed and molded packaging, Drink cups and lids, Structural foam, Custom sheetProperties were determined..
|
|||
| CTE, linear |
75.0
µm/m-°C @Temperature 20.0 °C |
41.7
µin/in-°F @Temperature 68.0 °F |
ISO 11359 |
|
LG Chemical RS-800 ABS, Extrusion, High Impact, HCFC Resistant
Information Provided by LG Chem
|
|||
| CTE, linear | 75.0 µm/m-°C | 41.7 µin/in-°F | DIN 52328 |
|
Isoflon PA 6G Cast Polyamide 6
General use for mechanical partsGood heat resistanceEasy to useHigh moisture regainInformation provided by Isoflon.
|
|||
| CTE, linear | 75.0 - 110 µm/m-°C | 41.7 - 61.1 µin/in-°F | ASTM D696 |
|
Guarniflon PTFE G405 Polytetrafluoroethylene 25% Glass Fiber
PTFE G Standard Compound with glass fiberProperties: Enhanced wear resistance. Enhanced chemical resistance (except for alkali and hydrofluoric acid).Applications: Valve seats, seals, bearings, re..
|
|||
| CTE, linear |
75.0
-
80.0
µm/m-°C @Temperature 0.000 - 80.0 °C |
41.7
-
44.4
µin/in-°F @Temperature 32.0 - 176 °F |
ASTM D696 |
|
Styron Pulse® A35-105 PC/ABS
PULSEâ„¢ A35-105 engineering resins give exceptional impact strength even at low temperatures and have high heat distortion temperature.Information provided by DowThis product line was spun off f..
|
|||
| CTE, linear |
75.0
-
80.0
µm/m-°C @Temperature 0.000 - 80.0 °C |
41.7
-
44.4
µin/in-°F @Temperature 32.0 - 176 °F |
ASTM D696 |
|
Styron Pulse® A35-110 PC/ABS
PULSEâ„¢ A35-110 engineering resins give exceptional impact strength even at low temperatures and have high heat distortion temperature. The proprietary mass ABS technology of Dow allows these p..
|
|||
| CTE, linear |
75.0
-
85.0
µm/m-°C @Temperature -30.0 - 30.0 °C |
41.7
-
47.2
µin/in-°F @Temperature -22.0 - 86.0 °F |
TMA |
|
SABIC Innovative Plastics Noryl GTX CRN500 PPE+PA6 (Asia Pacific)
Pa6 based unfilled GTX for Non-Auto marketThis data was supplied by SABIC-IP for the Asia Pacific region.
|
|||
| CTE, linear |
75.0
-
80.0
µm/m-°C @Temperature 0.000 - 80.0 °C |
41.7
-
44.4
µin/in-°F @Temperature 32.0 - 176 °F |
ASTM D696 |
|
Styron Pulse® 920 MG PC/ABS
An inherently matt medium heat, medium impact PC/ABS resin, PULSEâ„¢ 920 MG is designed for interior automotive applications where a matt aesthetic is required.Information provided by DowThis pro..
|
|||
| CTE, linear | 75.0 µm/m-°C | 41.7 µin/in-°F | Below Tg |
|
Tra-Con Tra-Bond 293-1M General Purpose Instrument Epoxy Adhesive
TRA-BOND 293-1M general purpose epoxy adhesive is designed to provide strong, resilient bonds to a variety of difficult-to-bond substrates, such as gold, nickel, silver, copper and brass. The 293-se..
|
|||
| CTE, linear | 75.0 µm/m-°C | 41.7 µin/in-°F | Below Tg |
|
Tra-Con Tra-Bond 526M02 High Tg Fiber Optic Adhesive
TRA-BOND 526M02 is a two-part, low viscosity epoxy system that was developed specifically for fiber optic applications. This material is recommended for bonding fiber optic bundles, potting glass fi..
|
|||
| CTE, linear |
75.0
µm/m-°C @Temperature -30.0 - 60.0 °C |
41.7
µin/in-°F @Temperature -22.0 - 140 °F |
ASTM D696 |
|
Asahi Kasei Xyron® 200H Modified Polyphenylene Ether
Heat ResistantInformation provided by Asahi Kasei
|
|||
| CTE, linear |
75.0
µm/m-°C @Temperature -30.0 - 60.0 °C |
41.7
µin/in-°F @Temperature -22.0 - 140 °F |
ASTM D696 |
|
Asahi Kasei Xyron® 340W Modified Polyphenylene Ether
Flame RetardantInformation provided by Asahi Kasei
|
|||
| CTE, linear |
75.0
µm/m-°C @Temperature -30.0 - 60.0 °C |
41.7
µin/in-°F @Temperature -22.0 - 140 °F |
ASTM D696 |
|
Asahi Kasei Xyron® X05516 Modified Polyphenylene Ether
AutomotiveInformation provided by Asahi Kasei
|
|||
| CTE, linear |
75.0
µm/m-°C @Temperature -30.0 - 60.0 °C |
41.7
µin/in-°F @Temperature -22.0 - 140 °F |
ASTM D696 |
|
Asahi Kasei Xyron® X0722 Modified Polyphenylene Ether
AutomotiveInformation provided by Asahi Kasei
|
|||
| CTE, linear | 75.0 µm/m-°C | 41.7 µin/in-°F | GB1036 |
|
Beijing Evergrow Resources MoS2 Filled Nylon
Information provided by Beijing Evergrow Resources.
|
|||
| CTE, linear |
75.0
µm/m-°C @Temperature -30.0 - 60.0 °C |
41.7
µin/in-°F @Temperature -22.0 - 140 °F |
ASTM D696 |
|
Asahi Kasei Xyron® 340V Modified Polyphenylene Ether
Flame RetardantInformation provided by Asahi Kasei
|
|||
| CTE, linear |
75.0
µm/m-°C @Temperature -30.0 - 60.0 °C |
41.7
µin/in-°F @Temperature -22.0 - 140 °F |
ASTM D696 |
|
Asahi Kasei Xyron® X0715 Modified Polyphenylene Ether
AutomotiveInformation provided by Asahi Kasei
|
|||
| CTE, linear |
75.0
µm/m-°C @Temperature 20.0 °C |
41.7
µin/in-°F @Temperature 68.0 °F |
|
|
Ineos Nova 4210 Medium Impact Polystyrene
(discontinued **)
Excellent balance of properties, USP Class VIApplications: Consumer electronics, Injection molding applicationsProperties were determined on injection molded specimens at 23°C and 50% R.H. unless o..
|
|||
| CTE, linear |
75.0
µm/m-°C @Temperature 20.0 °C |
41.7
µin/in-°F @Temperature 68.0 °F |
|
|
Ineos Nova 5450 High Impact Polystyrene
(discontinued **)
High impact, Good ESCRApplications: Thermoformed containers and lids, Hot and cold beverage cups, Custom sheet, Single service packagingProperties were determined on injection molded specimens at 23..
|
|||
| CTE, linear |
75.0
µm/m-°C @Temperature -30.0 - 60.0 °C |
41.7
µin/in-°F @Temperature -22.0 - 140 °F |
ASTM D696 |
|
Asahi Kasei Xyron® 300V Modified Polyphenylene Ether
Flame RetardantInformation provided by Asahi Kasei
|
|||
| CTE, linear | 75.0 µm/m-°C | 41.7 µin/in-°F | GB1036 |
|
Beijing Evergrow Resources MC Nylon
Information provided by Beijing Evergrow Resources.
|
|||
| CTE, linear |
75.0
µm/m-°C @Temperature -30.0 - 100 °C |
41.7
µin/in-°F @Temperature -22.0 - 212 °F |
ASTM D696 |
|
LyondellBasell Hostacom™ ZB752AC Polypropylene Homopolymer
Description: Hostacom™ ZB752AC precolored, medium melt flow, 2,800 MPa flexural modulus, mineral-filled polypropylene homopolymer has a very good combination of strength, stiffness, and impact resi..
|
|||
| CTE, linear |
75.0
µm/m-°C @Temperature -30.0 - 80.0 °C |
41.7
µin/in-°F @Temperature -22.0 - 176 °F |
ASTM D696 |
|
LyondellBasell INDURE™ X210 TPO
Description: INDURE™ X210 engineered polyolefin material is designed for large automotive exterior applications that require ductile impact properties at low temperatures, and processability. Appli..
|
|||
Copyright © lookpolymers.com All Rights Reserved