- HOME
- POLYMER SEARCH
- Polymer Property : CTE, linear = 5.56 µin/in-°F
Polymer Property : CTE, linear = 5.56 µin/in-°F Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear |
10.0
-
20.0
µm/m-°C <br>@Temperature 50.0 - 100 °C
|
5.56
-
11.1
µin/in-°F <br>@Temperature 122 - 212 °F
|
ISO 11359-2 |
|
Raschig Group 2567 AMC
Glass fiber-reinforced and inorganically filled polyester molding compound (UP) in various colors. Outstanding mechanical strength similar to BMC/SMC, very good electrical isolation properties and ..
|
|||
| CTE, linear | 10.0 - 50.0 µm/m-°C | 5.56 - 27.8 µin/in-°F | Average value: 25.9 µm/m-°C Grade Count:27 |
|
Overview of materials for Polycarbonate, 30% Glass Filled
This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate, 30% Glass Filled". Specific grades with glass content between 25% and 34% are included. E..
|
|||
| CTE, linear |
10.0
-
52.0
µm/m-°C <br>@Temperature 100 - 200 °C
|
5.56
-
28.9
µin/in-°F <br>@Temperature 212 - 392 °F
|
Average value: 31.0 µm/m-°C Grade Count:2 |
|
Overview of materials for Polyphenylene Sulfide (PPS) with 30% Glass Fiber Filler
This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Sulfide (PPS) with 30% Glass Fiber Filler". Specific grades with glass content between 25%..
|
|||
| CTE, linear |
10.0
µm/m-°C <br>@Thickness 1.57 mm,<br> Temperature 20.0 °C
|
5.56
µin/in-°F <br>@Thickness 0.0620 in,<br> Temperature 68.0 °F
|
x-axis; IPC-TM 650-2.4.24 |
|
Industrial Laminates/Norplex NP842 Paper Base Laminate
(discontinued **)
Description: Paper reinforced phenolic grade with controlled conductivity. Mechanical strength similar to NP611. NP842 is semi-conductive on the surfaces and through the laminate.Thickness Tested: 0..
|
|||
| CTE, linear | 10.0 - 100 µm/m-°C | 5.56 - 55.6 µin/in-°F | Average value: 70.9 µm/m-°C Grade Count:42 |
|
Overview of materials for Nylon 66, Unreinforced, Flame Retardant
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, Unreinforced, Flame Retardant". Each property range of values reported is minimum and maximum ..
|
|||
| CTE, linear | 10.0 - 27.0 µm/m-°C | 5.56 - 15.0 µin/in-°F | Average value: 20.5 µm/m-°C Grade Count:25 |
|
Overview of materials for Nylon 66, 60% Glass Fiber Filled
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 60% Glass Fiber Filled". Specific grades with glass content between 55% and 64% are included. ..
|
|||
| CTE, linear | 10.0 - 48.6 µm/m-°C | 5.56 - 27.0 µin/in-°F | Average value: 29.1 µm/m-°C Grade Count:7 |
|
Overview of materials for Nylon 12, Carbon Fiber Filled
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 12, Carbon Fiber Filled". Each property range of values reported is minimum and maximum values of ..
|
|||
| CTE, linear | 10.0 µm/m-°C | 5.56 µin/in-°F | |
|
Mateck Lanthanum Aluminate Substrate, LaAlO3 rhombohedral
Substrate single crystals for superconductivity
|
|||
| CTE, linear |
10.0
µm/m-°C <br>@Temperature 20.0 °C
|
5.56
µin/in-°F <br>@Temperature 68.0 °F
|
x-axis |
|
Industrial Laminates/Norplex ES-2 Engraving Stock
Description: Composed of black phenolic paper core, sub surfaces of white melamine, and various pigmented cover plies.
|
|||
| CTE, linear |
10.0
µm/m-°C <br>@Thickness 1.57 mm,<br> Temperature 20.0 °C
|
5.56
µin/in-°F <br>@Thickness 0.0620 in,<br> Temperature 68.0 °F
|
x-axis; IPC-TM 650-2.4.24 |
|
Industrial Laminates/Norplex NP325 Cotton Fabric
Description: Linen phenolic laminate with graphite added as a solid lubricant. Linen substrate provides better machining and wear resistance than NP315.Thickness Tested: 0.062", 0.125" and 0.500".
|
|||
| CTE, linear |
10.0
µm/m-°C <br>@Thickness 1.57 mm,<br> Temperature 20.0 °C
|
5.56
µin/in-°F <br>@Thickness 0.0620 in,<br> Temperature 68.0 °F
|
x-axis; IPC-TM 650-2.4.24 |
|
Industrial Laminates/Norplex NP843 Paper Base Laminate
Description: Paper reinforced phenolic grade with controlled conductivity. Mechanical strength similar to NP611. NP843 has conductive surfaces only, as compared to NP842, which is conductive through..
|
|||
| CTE, linear | 10.0 µm/m-°C | 5.56 µin/in-°F | ISO 11359-2 |
|
Menzolit Menzolit® BMC 0170 Unsaturated Polyester UP
BMC 0170 is a general purpose BMC for electrical applications. Product according to type 801 DIN 16911. The glass content is on a level that combines good mouldability with good strength and stiffne..
|
|||
| CTE, linear | 10.0 µm/m-°C | 5.56 µin/in-°F | ISO 11359-2 |
|
Menzolit Menzolit® BMC 0180 Unsaturated Polyester UP
BMC 0180 is a general purpose BMC for electrical applications. Product according to type 803 DIN 16911. The glass content is on a level that combines good mould ability with good strength and stiffn..
|
|||
| CTE, linear | 10.0 µm/m-°C | 5.56 µin/in-°F | ISO 11359-2 |
|
Menzolit Menzolit® BMC 0200 Unsaturated Polyester UP
BMC 0200 is a standard BMC for general purpose applications. The glass content is on a level that combines good mouldability with good strength and stiffness properties. Even without a specific fire..
|
|||
| CTE, linear | 10.0 µm/m-°C | 5.56 µin/in-°F | ISO 11359-2 |
|
Menzolit Menzolit® BMC 2500 Unsaturated Polyester UP
BMC 2500 is a special BMC for high voltage isolating applications. The glass content is set to a level that combines good mouldability with good strength and stiffness properties. The fire retardanc..
|
|||
| CTE, linear | 10.0 µm/m-°C | 5.56 µin/in-°F | ISO 11359-2 |
|
Menzolit Menzolit® SMC 0390 Unsaturated Polyester UP
SMC 0390 is a standard low profile SMC. Because of its low shrinkage, the material shows good surface quality as well as very low warpage. The product is suitable for applications if a better surfac..
|
|||
| CTE, linear | 10.0 µm/m-°C | 5.56 µin/in-°F | ISO 11359-2 |
|
Menzolit Menzolit® SMC 0400 Unsaturated Polyester UP
SMC 0400 is a Class-A SMC for exterior body applications on cars, LCV´s and trucks. These compounds mould to parts with good up to excellent surface quality for medium bake in-line and off-line p..
|
|||
| CTE, linear | 10.0 µm/m-°C | 5.56 µin/in-°F | (z) |
|
GrafTech GRAFCELL® FFP-300 SERIES Flow Field Plate Graphite
Manufactured from expanded natural graphite, GRAFCELL® Flow Field Plate (FFP) components retain a continuous graphitic phase. This phase continuity, combined with a low contact resistance, provid..
|
|||
| CTE, linear | 10.0 µm/m-°C | 5.56 µin/in-°F | ISO 11359-2 |
|
Menzolit Menzolit® BMC 3000 Unsaturated Polyester UP
BMC 3000 is a special BMC suitable for the use in microwave and cookware applications.It has high temperature resistance, and meets requirements for food contact applications. It has a high gloss fi..
|
|||
| CTE, linear | 10.0 µm/m-°C | 5.56 µin/in-°F | ISO 11359-2 |
|
Menzolit Menzolit® SMC 2400 Unsaturated Polyester UP
SMC 2400 is a SMC with fire retardancy. The glass level has been selected to combine mouldability with strength and stiffness properties. The fire retardancy is especially high, and the material is ..
|
|||
| CTE, linear |
10.0
µm/m-°C <br>@Temperature -30.0 - 70.0 °C
|
5.56
µin/in-°F <br>@Temperature -22.0 - 158 °F
|
|
|
Schott GM35429 Dental Glass
Remarks: High fluoride containing Ca-glassApplication: Glass ionomer cementAdvantagesGreater variety of composition and refractive indiciesOutstanding transparencyBest radiopacitiesInformation Provi..
|
|||
| CTE, linear |
10.0
µm/m-°C <br>@Temperature 23.0 - 55.0 °C
|
5.56
µin/in-°F <br>@Temperature 73.4 - 131 °F
|
ISO 11359-2 |
|
Polyplastics Duracon® CH-20 Acetal Co-polymer (POM), Conductive, CF reinforced, Wear resistance
DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O)..
|
|||
| CTE, linear |
10.0
-
13.0
µm/m-°C <br>@Temperature 20.0 °C
|
5.56
-
7.22
µin/in-°F <br>@Temperature 68.0 °F
|
Parallel DOM |
|
Alliance A-5S Alnico Magnetic Material |
|||
| CTE, linear |
10.0
µm/m-°C <br>@Thickness 2.00 mm,<br> Temperature 23.0 - 55.0 °C
|
5.56
µin/in-°F <br>@Thickness 0.0787 in,<br> Temperature 73.4 - 131 °F
|
ISO 11359-2 |
|
Ascend Performance Materials Vydyne® 21SPF Nylon 66, General Purpose, High Productivity, DAM
Vydyne® 21SPF is general-purpose PA66 resin. Available in natural, it is designed principally for injection-molding fabrication. This grade offers a well-balanced combination of engineering propert..
|
|||
| CTE, linear |
10.0
µm/m-°C <br>@Thickness 2.00 mm,<br> Temperature 23.0 - 55.0 °C
|
5.56
µin/in-°F <br>@Thickness 0.0787 in,<br> Temperature 73.4 - 131 °F
|
ISO 11359-2 |
|
Ascend Performance Materials Vydyne® 66B Nylon 66, General Purpose, high viscosity, DAM
Vydyne® 66B is a high-viscosity, heat-stabilized PA66 resin suitable for injection-molding and extrusion applications. It is available in natural color only. Vydyne 66B resin offers high strength, ..
|
|||
| CTE, linear |
10.0
-
30.0
µm/m-°C <br>@Temperature 20.0 °C
|
5.56
-
16.7
µin/in-°F <br>@Temperature 68.0 °F
|
Parallel DOM |
|
Alliance BCN-12 Bonded (Composite) Magnetic Material |
|||
| CTE, linear |
10.0
-
77.4
µm/m-°C <br>@Temperature 37.8 - 150 °C
|
5.56
-
43.0
µin/in-°F <br>@Temperature 100 - 302 °F
|
Average value: 33.3 µm/m-°C Grade Count:11 |
|
Overview of materials for Epoxy, Molded, Glass Fiber Filler
This property data is a summary of similar materials in the MatWeb database for the category "Epoxy, Molded, Glass Fiber Filler". Each property range of values reported is minimum and maximum values..
|
|||
Copyright © lookpolymers.com All Rights Reserved