- HOME
- POLYMER SEARCH
- Polymer Property : CTE, linear = 50.0 µin/in-°F
Polymer Property : CTE, linear = 50.0 µin/in-°F Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
ASTM D 696 |
|
Polimeri Europa Edistir RK 5512G Polystyrene
UL94 V-2, polybromobiphenylether (PBBE) free, high impact polystyrene with good mechanical and thermal properties. It exhibits a good stability to the processing conditions and to the light
exposure..
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | ASTM D696 |
|
Polimeri Europa Edistir® PD ICE S 900 High Impact Polystyrene - Very High ESCR
Very high environmental stress cracking resistant (VH ESCR) HIPS.ICE S 900 exhibits high toughness and excellent chemical resistance to oils, fats and chemical agents, and in particular to cyclopent..
|
|||
| CTE, linear |
90.0
µm/m-°C @Temperature 23.0 - 60.0 °C |
50.0
µin/in-°F @Temperature 73.4 - 140 °F |
|
|
Omnia Plastica Omniamid PA 6 - Akulon 6 - Dry
Semi-crystalline polymer of polyamide obtained by the polymerisation of the caprolactam. Its large popularity is due to both its good overall features as well as its cost-performance relationship. T..
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | |
|
Permabond 2010 Cyanoacrylate, gap filling
PERMABOND 200 is a high viscosity product with good flow control useful in wire tacking applications or bonding components. It is fast setting and suitable for use on plastics, rubber and metals. Cy..
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | |
|
Permabond 735 Cyanoacrylate, toughened
PERMABOND® 735 is a toughened cyanoacrylate with very good impact and peel strength when compared to a conventional cyanoacrylate. It bonds rapidly at room temperature and its viscosity is stable o..
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | |
|
Permabond HM118 Anaerobic Threadlocker
Permabond® HM118 Threadlocker is an excellent general-purpose threadlocker and sealant. It is used for locking bolts, nuts and screws that require permanent assembly. Cure is fast and reliable on s..
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | |
|
Permabond HM163 Anaerobic Retainer
Permabond® HM163 is a medium viscosity, thixotropic anaerobic retaining compound that cures when confined between metal parts to form a tough bond. It has been specifically formulated to provide a ..
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | |
|
Permabond LH197 Anaerobic Gasketmaker
Permabond® LH197 is an anaerobic material designed for making “formed in situ” gaskets between metal surfaces. It is highly flexible, making it ideal for dissimilar surfaces where differential th..
|
|||
| CTE, linear |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
|
Americas Styrenics STYRON™ A-TECH™ 1220 High-Impact Polystyrene Resin
(discontinued **)
STYRON™ A-TECH™ 1220 advanced technology polystyrene resin is a high impact, high modulus resin for extrusion thermoforming applications. The improved durability of this resin allows potential do..
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | |
|
Permabond 108 Cyanoacrylate, gap filling
PERMABOND® 108 is an intermediate viscosity cyanoacrylate that is used to bond through intermediate gaps. It is fast setting and suitable for use on plastics, rubber and metals. Cyanoacrylate adhes..
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | |
|
Permabond 799 Cyanoacrylate, Surface insensitive
PERMABOND® 799 is a high viscosity cyanoacrylate that combines fast cure with the ability to cure through a large gap. Plastics, metals, ceramics and elastomers are also rapidly bonded. The fast cu..
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | DIN 53752 |
|
Lehmann & Voss LUVOCOM® 80-0837 Polyacetal-copolymer, with PTFE, lubricant modified
Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.Emergency running property, gl..
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | ISO 11359 |
|
GEHR Plastics PA 12 TR Transparent Nylon 12
Used for optical components that benefit from the transparency and the high dynamic strengthProperties:TransparencyExtremely high dynamic strengthHigh chemical resistanceHigh stress-cracking resista..
|
|||
| CTE, linear |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
DIN 53752; ASTM D696 |
|
Kolon KOPA® KN173HI4 High Impact Nylon 6
KOPA® is a thermoplastic resin with excellent mechanical, thermal and electrical properties and is widely used in automobile and industrial parts.Good mechanical properties, outstanding self-lubr..
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | ASTM D696 |
|
Gromax CCP PBT 1100-220S
Product Description: PBT unreinforced and impact-modified injection molding grade. Characteristics:Low warp age, high toughness and excellent dimensional stabilityExcellent glossy surface and less-g..
|
|||
| CTE, linear |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
|
Spartech Korad® SP-9011 Cap ABS Sheet
Description: ABS SheetInformation provided by Spartech.
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | ASTM D 696 |
|
Styrolution PS 5310 HIPS
Excellent ESCRGood ToughnessMatte easily decorated finishInformation provided by Styrolution
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | ASTM D696 |
|
Samyang Tribit® 1501N PBT, Flame Retardancy
Crystallization is fast, formability is excellent and thermal resistance, chemical resistance, electrical properties and abrasion resistance are excellent.1501N is a V-2 flame retardancy grade.Appli..
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | ASTM D696 |
|
Samyang Tribit® 1503S Polybutylene Terephthalate
Characteristics:High impactApplications:AutomotiveConnectorGearOutdoor handleIgnition systemElectronicConnectorGas valveCoil bobbinSwitch caseRelay caseO/A partsAll information provided by Samyang
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | |
|
Cast Nylons Nycast® RX Solid Lubricant Filled Red Cast Nylon 6
NYCAST® RX is a specially formulated, self-lubricating grade designed to deliver low coefficient of friction, superior wear resistance, high pressure/velocity performance, and low moisture absorpti..
|
|||
| CTE, linear |
90.0
µm/m-°C @Temperature -30.0 - 60.0 °C |
50.0
µin/in-°F @Temperature -22.0 - 140 °F |
ASTM D696 |
|
Asahi Kasei Xyron® A0210 PPE/PA
AutomotiveInformation provided by Asahi Kasei
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | ASTM D696 |
|
Americas Styrenics STYRON A-TECH® 1400AS High Impact Polystyrene
Product CharacteristicsHigh FlowGood ImpactFood Contact CompliantTypical ApplicationsTelevision housingsPrinter HousingsConsumer goodsInformation provided by AmericasStyrenics LLC.
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | ASTM D696 |
|
Americas Styrenics STYRON® 678D High Heat Crystal Polystyrene
Product CharacteristicsHigh heat resistanceExcellent clarityGood moldabilityFood Contact CompliantTypical ApplicationsDisposable cutleryHousewaresCompact disc and DVD jewel boxesDesk organizersInfor..
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | ASTM D696 |
|
Americas Styrenics STYRON® 649D High Heat Crystal Polystyrene
Product CharacteristicsExcellent moldabilityExcellent gloss in coextrusionExcellent clarityFood Contact CompliantTypical ApplicationsDisposable cutleryHousewaresCompact disc and DVD jewel boxesDesk ..
|
|||
| CTE, linear | 90.0 - 126 µm/m-°C | 50.0 - 70.0 µin/in-°F | ASTM D696 |
|
Arkema Group KYNAR® 460 Red Polyvinylidene Fluoride Homopolymer - Injection Molding and Extrusion
Characteristics: Broad molecular weight distribution, pigmented. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechanical strength, low permeability, ..
|
|||
| CTE, linear |
90.0
µm/m-°C @Temperature 20.0 °C |
50.0
µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
|
ExxonMobil Paxon™ BA7718 Sheet Extrusion and Blow Molding Resin
(discontinued **)
BA7718 is a 25% brown mica-filled, medium molecular weight, high density polyethylene. This material has been specifically developed as a cost effective resin for applications which require outstan..
|
|||
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | |
|
Permabond A134 Anaerobic Retainer
Permabond® A134 is a high-strength anaerobic product designed for the permanent locking and sealing of metal parts. Its 'non-drip' formulation makes it suitable for use on larger fittings, coarse t..
|
|||
Copyright © lookpolymers.com All Rights Reserved