- HOME
- POLYMER SEARCH
- Polymer Property : CTE, linear = 50.0 µin/in-°F
Polymer Property : CTE, linear = 50.0 µin/in-°F Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear |
80.0
-
90.0
µm/m-°C @Temperature 20.0 °C |
44.4
-
50.0
µin/in-°F @Temperature 68.0 °F |
DN.53752 |
|
Polimersan Plastics POLIKES® (PA 6 G) Cast Polyamide
POLIKES® PA6 G (CAST POLYAMIDE) is a plastic with high physical, electrical and chemical resistance. Its resistance is high especially against strokes and loads. Its temperature resistance is high..
|
|||
| CTE, linear | 70.0 - 90.0 µm/m-°C | 38.9 - 50.0 µin/in-°F | Polykemi |
|
Polykemi AB POLYfill PP CIQ15020 Polypropylene, Mineral Reinforced
Information provided by Polykemi AB
|
|||
| CTE, linear | 70.0 - 90.0 µm/m-°C | 38.9 - 50.0 µin/in-°F | Polykemi |
|
Polykemi AB POLYfill PP CQX10030E10 Polypropylene, Mineral Reinforced, Elastomer Modified
Information provided by Polykemi AB
|
|||
| CTE, linear | 70.0 - 90.0 µm/m-°C | 38.9 - 50.0 µin/in-°F | Polykemi |
|
Polykemi AB POLYfill PP CQX30030 RTX Polypropylene, Mineral Reinforced, Scratch Resistant
Information provided by Polykemi AB
|
|||
| CTE, linear | 70.0 - 90.0 µm/m-°C | 38.9 - 50.0 µin/in-°F | Polykemi |
|
Polykemi AB POLYfill PPC TS20020 Polypropylene Copolymer, Mineral Reinforced
Information provided by Polykemi AB
|
|||
| CTE, linear | 50.0 - 90.0 µm/m-°C | 27.8 - 50.0 µin/in-°F | Average value: 76.0 µm/m-°C Grade Count:25 |
|
Overview of materials for Polystyrene, Molded, Unreinforced
This property data is a summary of similar materials in the MatWeb database for the category "Polystyrene". Each property range of values reported is minimum and maximum values of appropriate MatWeb..
|
|||
| CTE, linear | 45.0 - 90.0 µm/m-°C | 25.0 - 50.0 µin/in-°F | Average value: 63.7 µm/m-°C Grade Count:46 |
|
Overview of materials for PVC, Extruded
This property data is a summary of similar materials in the MatWeb database for the category "PVC, Extruded". Each property range of values reported is minimum and maximum values of appropriate MatW..
|
|||
| CTE, linear |
70.0
-
90.0
µm/m-°C @Temperature 20.0 °C |
38.9
-
50.0
µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
|
Solvay Specialty Polymers Solef® 8808/0902 Carbon Fiber Reinforced PVDF Compound
(discontinued **)
Key features of this grade: Carbon Fiber Reinforcement, Formulated. Recommended processing is injection. Available as granules.General information about SOLEF® PVDF: SOLEF® PVDF is a fluorinate..
|
|||
| CTE, linear | 12.0 - 90.0 µm/m-°C | 6.67 - 50.0 µin/in-°F | Average value: 44.3 µm/m-°C Grade Count:14 |
|
Overview of materials for Epoxy, Cast, Unreinforced
This property data is a summary of similar materials in the MatWeb database for the category "Epoxy, Cast, Unreinforced". Each property range of values reported is minimum and maximum values of appr..
|
|||
| CTE, linear | 17.1 - 90.0 µm/m-°C | 9.50 - 50.0 µin/in-°F | Average value: 48.4 µm/m-°C Grade Count:38 |
|
Overview of materials for Nylon 6, Glass Bead Filled
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Glass Bead Filled". Each property range of values reported is minimum and maximum values of app..
|
|||
| CTE, linear | 70.0 - 90.0 µm/m-°C | 38.9 - 50.0 µin/in-°F | Average value: 80.0 µm/m-°C Grade Count:4 |
|
Overview of materials for Nylon 12, Flame Retardant
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 12, Flame Retardant". Each property range of values reported is minimum and maximum values of appr..
|
|||
| CTE, linear | 32.0 - 90.0 µm/m-°C | 17.8 - 50.0 µin/in-°F | Average value: 67.0 µm/m-°C Grade Count:6 |
|
Overview of materials for Nylon, Amorphous Transparent Alloy
This property data is a summary of similar materials in the MatWeb database for the category "Nylon, Amorphous Transparent Alloy". Each property range of values reported is minimum and maximum value..
|
|||
| CTE, linear |
80.0
-
90.0
µm/m-°C @Temperature -30.0 - 30.0 °C |
44.4
-
50.0
µin/in-°F @Temperature -22.0 - 86.0 °F |
TMA |
|
SABIC Innovative Plastics NORYL GTX6601 PPE+PA66 (Asia Pacific)
PPE+PA Unfilled GTX
|
|||
| CTE, linear |
80.0
-
90.0
µm/m-°C @Temperature -30.0 - 30.0 °C |
44.4
-
50.0
µin/in-°F @Temperature -22.0 - 86.0 °F |
TMA |
|
SABIC Innovative Plastics NORYL GTX GTX6601 PPE+PA66 (Asia Pacific) |
|||
| CTE, linear |
50.0
-
90.0
µm/m-°C @Temperature 20.0 °C |
27.8
-
50.0
µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
|
Zeus EFEP Tubing |
|||
| CTE, linear |
50.0
-
90.0
µm/m-°C @Temperature 23.0 - 60.0 °C |
27.8
-
50.0
µin/in-°F @Temperature 73.4 - 140 °F |
ASTM D696 |
|
Daikin NEOFLON EA-LR43 ETFE Pellets
Due to its excellent melt flow properties, NEOFLON ETFE can be processed in the same was as other thermoplastic resins. NEOFLON ETFE is also highly suited to such secondary processes as welding, fl..
|
|||
| CTE, linear |
50.0
-
90.0
µm/m-°C @Temperature 23.0 - 60.0 °C |
27.8
-
50.0
µin/in-°F @Temperature 73.4 - 140 °F |
ASTM D696 |
|
Daikin NEOFLON EP-521 ETFE Pellets
Due to its excellent melt flow properties, NEOFLON ETFE can be processed in the same was as other thermoplastic resins. NEOFLON ETFE is also highly suited to such secondary processes as welding, fl..
|
|||
| CTE, linear |
50.0
-
90.0
µm/m-°C @Temperature 23.0 - 60.0 °C |
27.8
-
50.0
µin/in-°F @Temperature 73.4 - 140 °F |
ASTM D696 |
|
Daikin NEOFLON EP-610 ETFE Pellets
Due to its excellent melt flow properties, NEOFLON ETFE can be processed in the same was as other thermoplastic resins. NEOFLON ETFE is also highly suited to such secondary processes as welding, fl..
|
|||
| CTE, linear |
50.0
-
90.0
µm/m-°C @Temperature 23.0 - 60.0 °C |
27.8
-
50.0
µin/in-°F @Temperature 73.4 - 140 °F |
ASTM D696 |
|
Daikin NEOFLON EP-610AS ETFE Pellets
Due to its excellent melt flow properties, NEOFLON ETFE can be processed in the same was as other thermoplastic resins. NEOFLON ETFE is also highly suited to such secondary processes as welding, fl..
|
|||
| CTE, linear |
50.0
-
90.0
µm/m-°C @Temperature 23.0 - 60.0 °C |
27.8
-
50.0
µin/in-°F @Temperature 73.4 - 140 °F |
ASTM D696 |
|
Daikin NEOFLON RP-4020 EFEP Pellets
NEOFLON EFEP is an ETFE based fluoropolymer combining the excellent physical properties derived from ETFE together with a low processing temperature that is more compatible with conventional thermop..
|
|||
| CTE, linear |
50.0
-
90.0
µm/m-°C @Temperature 23.0 - 60.0 °C |
27.8
-
50.0
µin/in-°F @Temperature 73.4 - 140 °F |
ASTM D696 |
|
Daikin NEOFLON RP-4040 EFEP Pellets
NEOFLON EFEP is an ETFE based fluoropolymer combining the excellent physical properties derived from ETFE together with a low processing temperature that is more compatible with conventional thermop..
|
|||
| CTE, linear |
50.0
-
90.0
µm/m-°C @Temperature 23.0 - 60.0 °C |
27.8
-
50.0
µin/in-°F @Temperature 73.4 - 140 °F |
ASTM D696 |
|
Daikin NEOFLON RP-5000 EFEP Pellets
NEOFLON EFEP is an ETFE based fluoropolymer combining the excellent physical properties derived from ETFE together with a low processing temperature that is more compatible with conventional thermop..
|
|||
| CTE, linear |
50.0
-
90.0
µm/m-°C @Temperature 23.0 - 60.0 °C |
27.8
-
50.0
µin/in-°F @Temperature 73.4 - 140 °F |
ASTM D696 |
|
Daikin NEOFLON RP-5000AS EFEP Pellets
NEOFLON EFEP is an ETFE based fluoropolymer combining the excellent physical properties derived from ETFE together with a low processing temperature that is more compatible with conventional thermop..
|
|||
| CTE, linear |
50.0
-
90.0
µm/m-°C @Temperature 23.0 - 60.0 °C |
27.8
-
50.0
µin/in-°F @Temperature 73.4 - 140 °F |
ASTM D696 |
|
Daikin NEOFLON EP-620 ETFE Pellets
Due to its excellent melt flow properties, NEOFLON ETFE can be processed in the same was as other thermoplastic resins. NEOFLON ETFE is also highly suited to such secondary processes as welding, fl..
|
|||
| CTE, linear |
72.0
-
90.0
µm/m-°C @Temperature 20.0 °C |
40.0
-
50.0
µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
|
Ensinger Tecast Vekton™ 6PALM Premium Bearing Grade cast nylon (PA6)
Tecast 6PALM contains both solid and liquid lubricants dispersed throughout the nylon to provide consistent wear rates and coefficients of friction.Information provided by Ensinger, Inc.
|
|||
| CTE, linear |
50.0
-
90.0
µm/m-°C @Temperature 23.0 - 60.0 °C |
27.8
-
50.0
µin/in-°F @Temperature 73.4 - 140 °F |
ASTM D696 |
|
Daikin NEOFLON EP-541 ETFE Pellets
Due to its excellent melt flow properties, NEOFLON ETFE can be processed in the same was as other thermoplastic resins. NEOFLON ETFE is also highly suited to such secondary processes as welding, fl..
|
|||
| CTE, linear | 40.0 - 90.0 µm/m-°C | 22.2 - 50.0 µin/in-°F | Average value: 72.0 µm/m-°C Grade Count:5 |
|
Overview of materials for Nylon 66/6, Mineral Reinforced
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66/6, Mineral Reinforced". Each property range of values reported is minimum and maximum values of..
|
|||
| CTE, linear | 80.0 - 90.0 µm/m-°C | 44.4 - 50.0 µin/in-°F | |
|
Master Bond EP21TDC-2LO Two component, highly flexibilized epoxy resin compound
Product Description: Master Bond Polymer System EP21TDC-2LO is a two component, highly flexible epoxy resin compound for high performance bonding, sealing, coating, and encapsulation. It is formulat..
|
|||
| CTE, linear | 54.0 - 90.0 µm/m-°C | 30.0 - 50.0 µin/in-°F | Average value: 72.0 µm/m-°C Grade Count:5 |
|
Overview of materials for Acrylic, Impact Modified Sheet
This property data is a summary of similar materials in the MatWeb database for the category "Acrylic, Impact Modified Sheet". Each property range of values reported is minimum and maximum values of..
|
|||
Copyright © lookpolymers.com All Rights Reserved