Polymer Property : CTE, linear = 55.6 µin/in-°F Product List

Thermal Properties

Tips: 30 items are displayed at most.

Thermal Properties	Metric	English	Comments
CTE, linear	60.0 - 100 µm/m-°C @Temperature 20.0 °C	33.3 - 55.6 µin/in-°F @Temperature 68.0 °F	DN.53752
Polimersan Plastics POLIPA® (PA 6) Polyamide POLIPA® PA6 (POLYAMIDE) is produced by poly condensation of e-aminoacid and by the help of d-carbon acid and d-amine poly condensation. Its characteristics depend upon the numbers of the main struc..
CTE, linear	80.0 - 100 µm/m-°C	44.4 - 55.6 µin/in-°F	Polykemi
Polykemi AB POLYfill PP CQX10030 R3 Polypropylene, Mineral Reinforced, Scratch Resistant Information provided by Polykemi AB
CTE, linear	80.0 - 100 µm/m-°C	44.4 - 55.6 µin/in-°F	Polykemi
Polykemi AB POLYfill PP CQX8025 R2 Polypropylene, Mineral Reinforced, Scratch Resistant Information provided by Polykemi AB
CTE, linear	50.0 - 100 µm/m-°C @Temperature 20.0 °C	27.8 - 55.6 µin/in-°F @Temperature 68.0 °F	Cured
Resin Technology Group EN 239-2 Cationic UV Cure Epoxy Adhesive EN 239-2 is an epoxy-based, medium viscosity, cationic- curable adhesive/sealant. This product is activated by exposure to medium intensity UV radiation resulting in a high strength, chemical resist..
CTE, linear	23.0 - 100 µm/m-°C @Temperature >=162 °C	12.8 - 55.6 µin/in-°F @Temperature >=324 °F	Average value: 61.5 µm/m-°C Grade Count:1
Overview of materials for Polyetherketoneetherketoneketone (PEKEKK), Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyetherketoneetherketoneketone (PEKEKK), Glass Fiber Filled". Each property range of values reported i..
CTE, linear	43.0 - 100 µm/m-°C	23.9 - 55.6 µin/in-°F	Average value: 67.8 µm/m-°C Grade Count:5
Overview of materials for PETG Copolyester This property data is a summary of similar materials in the MatWeb database for the category "PETG Copolyester". Each property range of values reported is minimum and maximum values of appropriate M..
CTE, linear	50.0 - 100 µm/m-°C	27.8 - 55.6 µin/in-°F	Average value: 68.4 µm/m-°C Grade Count:25
Overview of materials for Polyphenylene Ether, Molded This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Ether, Molded". Each property range of values reported is minimum and maximum values of ap..
CTE, linear	30.0 - 100 µm/m-°C	16.7 - 55.6 µin/in-°F	Average value: 58.6 µm/m-°C Grade Count:15
Overview of materials for Acetal Copolymer, 20% Glass Fiber Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Acetal Copolymer, 20% Glass Fiber Reinforced". Specific grades with glass content between 15% and 24% ar..
CTE, linear	62.0 - 100 µm/m-°C	34.4 - 55.6 µin/in-°F	Average value: 74.0 µm/m-°C Grade Count:33
Overview of materials for Polycarbonate/ASA Alloy, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate/ASA Alloy, Unreinforced". Each property range of values reported is minimum and maximum va..
CTE, linear	48.6 - 100 µm/m-°C	27.0 - 55.6 µin/in-°F	Average value: 77.2 µm/m-°C Grade Count:10
Overview of materials for Polypropylene with 30% Talc Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 30% Talc Filler". Specific grades with primary filler content between 25% and 34% are..
CTE, linear	10.0 - 100 µm/m-°C	5.56 - 55.6 µin/in-°F	Average value: 70.9 µm/m-°C Grade Count:42
Overview of materials for Nylon 66, Unreinforced, Flame Retardant This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, Unreinforced, Flame Retardant". Each property range of values reported is minimum and maximum ..
CTE, linear	65.0 - 100 Âµm/m-Â°C	36.1 - 55.6 Âµin/in-Â°F	ASTM D696
Guarniflon PTFE G455 Polytetrafluoroethylene 35% Carbographite PTFE G Special Compound with carbon..Properties: Good thermal and electrical conductivity. Good resistance to deformation. Excellent resistance to load with low coefficient of friction and high w..
CTE, linear	80.0 - 100 Âµm/m-Â°C	44.4 - 55.6 Âµin/in-Â°F	25Â°C to 100Â°C; ASTM D696
Guarniflon FEP Fluorinated Ethylene Propylene Fluorinated thermoplastic material with excellent thermal, electrical and chemical inertness properties. Widely used for different industrial applications for its excellent chemical resistance up t..
CTE, linear	70.0 - 100 Âµm/m-Â°C @Temperature 20.0 - 100 Â°C	38.9 - 55.6 Âµin/in-Â°F @Temperature 68.0 - 212 Â°F	DIN 53752
Schwartz Technical Plastics LAMIGAMIDÂ® 100 Polyamide 6, Extruded, Conditioned Application: machine parts under 80 mm diameter, hammer-heads, cup-shaped bearing shellsInformation provided by Schwartz Technical Plastics GmbH
CTE, linear	70.0 - 100 Âµm/m-Â°C @Temperature 20.0 - 100 Â°C	38.9 - 55.6 Âµin/in-Â°F @Temperature 68.0 - 212 Â°F	DIN 53752
Schwartz Technical Plastics LAMIGAMIDÂ® 100 Polyamide 6, Extruded, Dry Application: machine parts under 80 mm diameter, hammer-heads, cup-shaped bearing shellsInformation provided by Schwartz Technical Plastics GmbH
CTE, linear	80.0 - 100 Âµm/m-Â°C @Temperature 20.0 - 100 Â°C	44.4 - 55.6 Âµin/in-Â°F @Temperature 68.0 - 212 Â°F	DIN 53752
Schwartz Technical Plastics LAMIGAMIDÂ® 1200 Cast Polyamide 12, Dry Application: sprockets, chain-wheels, pulleys, wheels, slide and seal rings, curve disks, etc.Information provided by Schwartz Technical Plastics GmbH
CTE, linear	80.0 - 100 Âµm/m-Â°C	44.4 - 55.6 Âµin/in-Â°F	ISO 11359
Styrolution NovodurÂ® BX13036 ABS + PMMA Novodur BX13036 is a new PMMA/ABS blend with high surface quality, enhanced scratch resistance and balanced mechanical propertiesInformation provided by Styrolution
CTE, linear	80.0 - 100 Âµm/m-Â°C @Temperature -30.0 - 30.0 Â°C	44.4 - 55.6 Âµin/in-Â°F @Temperature -22.0 - 86.0 Â°F	TMA
SABIC Innovative Plastics NORYL GTX GTX6011 PPE+PA6 (Asia Pacific) PA6 based unfilled GTX. High impact.
CTE, linear	70.0 - 100 µm/m-°C @Temperature 20.0 °C	38.9 - 55.6 µin/in-°F @Temperature 68.0 °F	DIN 53752
Zell-Metall Engineering Plastics Zellamid 202 (PA 6) Zellamid® 202 is a tough material with high resistance to abrasion and impact. It features good mechanical properties. By water absorption the excellent shock and vibration resistance is increased...
CTE, linear	70.0 - 100 µm/m-°C @Temperature 20.0 °C	38.9 - 55.6 µin/in-°F @Temperature 68.0 °F	DIN 53752
Zell-Metall Engineering Plastics Zellamid 250 (PA6.6) Zellamid® 250 is noted for its high temperature resistance and high tensile strength. It is the hardest and most rigid type of extruded Nylon. Main characteristics are high resistance to fuels, oil..
CTE, linear	95.0 - 100 µm/m-°C @Temperature 20.0 °C	52.8 - 55.6 µin/in-°F @Temperature 68.0 °F
Abatron AboCast/AboCure 8109-4 Safety hardener (minimum toxicity) version of 8109-3.Processing: 100/10 pbw; Potlife: 2.5 h/20°C (68°F), 30 min/40°C (105°F), 15 min/60°C (140°F); mix at RT; cures in: 24 h/20°C (68°F), 2-3 ..
CTE, linear	30.0 - 100 µm/m-°C	16.7 - 55.6 µin/in-°F	Average value: 73.7 µm/m-°C Grade Count:34
Overview of materials for Nylon 6, Unreinforced, Flame Retardant This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Unreinforced, Flame Retardant". Each property range of values reported is minimum and maximum v..
CTE, linear	80.0 - 100 µm/m-°C	44.4 - 55.6 µin/in-°F	Average value: 85.0 µm/m-°C Grade Count:14
Overview of materials for Nylon 6, Film Grade This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Film Grade". Each property range of values reported is minimum and maximum values of appropriat..
CTE, linear	52.2 - 100 µm/m-°C	29.0 - 55.6 µin/in-°F	Average value: 70.1 µm/m-°C Grade Count:4
Overview of materials for Nylon 66, 20% Mineral Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 20% Mineral Filled". Specific grades with primary filler content between 15% and 24% are inclu..
CTE, linear	100 - 100 µm/m-°C @Temperature -90.0 - -30.0 °C	55.6 - 55.6 µin/in-°F @Temperature -130 - -22.0 °F	Average value: 100 µm/m-°C Grade Count:1
Overview of materials for High Density Polyethylene (HDPE), Crosslinkable This property data is a summary of similar materials in the MatWeb database for the category "High Density Polyethylene (HDPE), Crosslinkable". Each property range of values reported is minimum and ..
CTE, linear	70.0 - 100 µm/m-°C	38.9 - 55.6 µin/in-°F	Average value: 81.3 µm/m-°C Grade Count:16
Overview of materials for Nylon 6, MoS2 Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, MoS2 Filled". Each property range of values reported is minimum and maximum values of appropria..
CTE, linear	50.0 - 100 µm/m-°C	27.8 - 55.6 µin/in-°F	Average value: 79.7 µm/m-°C Grade Count:13
Overview of materials for Polystyrene, Flame Retardant This property data is a summary of similar materials in the MatWeb database for the category "Polystyrene, Flame Retardant". Each property range of values reported is minimum and maximum values of a..
CTE, linear	10.0 - 100 µm/m-°C @Temperature -100 - 250 °C	5.56 - 55.6 µin/in-°F @Temperature -148 - 482 °F	Average value: 21.2 µm/m-°C Grade Count:23
Overview of materials for Polyphenylene Sulfide (PPS) with 40% Glass Fiber Filler This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Sulfide (PPS)- 40% Glass filled; Molded". Specific grades with glass content between 35% a..
CTE, linear	7.00 - 100 µm/m-°C @Temperature 55.0 - 250 °C	3.89 - 55.6 µin/in-°F @Temperature 131 - 482 °F	Average value: 20.4 µm/m-°C Grade Count:19
Overview of materials for Polyphthalamide (PPA), 30% Glass Fiber Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Polyphthalamide, 30% Glass Fiber Reinforced". Specific grades with glass content between 25% and 34% are..
CTE, linear	100 - 100 µm/m-°C @Temperature 100 - 100 °C	55.6 - 55.6 µin/in-°F @Temperature 212 - 212 °F	Average value: 100 µm/m-°C Grade Count:1
Overview of materials for Polypropylene, Extrusion Grade This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene, Extrusion Grade". Each property range of values reported is minimum and maximum values of..