- HOME
- POLYMER SEARCH
- Polymer Property : CTE, linear = 66.7 µin/in-°F
Polymer Property : CTE, linear = 66.7 µin/in-°F Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 120 µm/m-°C | 66.7 µin/in-°F | ASTM D-696 |
|
Plaskolite Optix® CA - 1000 I High Impact Grade Acrylic Resin
OPTIX® impact-modified grades offer 7 to 10 times the impact resistance of general purpose polymers while maintaining optical clarity.Information provided by Plaskolite, Inc.
|
|||
| CTE, linear | 120 µm/m-°C | 66.7 µin/in-°F | ASTM D-696 |
|
Plaskolite Optix® CP - 1000 IG High Impact Grade Acrylic Resin
OPTIX® impact-modified grades offer 7 to 10 times the impact resistance of general purpose polymers while maintaining optical clarity.Information provided by Plaskolite, Inc.
|
|||
| CTE, linear | 120 µm/m-°C | 66.7 µin/in-°F | ASTM D-696 |
|
Plaskolite West Optix® CA - 1000 I High Impact Acrylic Resin
Optix® impact-modified grades exhibit 7 to 10 times the impact strength of general purpose grades and maintaining the superior optical properties. Each grade is offered in a grade(G) that resists g..
|
|||
| CTE, linear |
120
-
140
µm/m-°C @Temperature 20.0 °C |
66.7
-
77.8
µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
|
Solvay Specialty Polymers Solef® 3208/0150 Anti-friction PVDF Compound
(discontinued **)
Key features of this grade: Anti-friction, Formulated. Recommended processing is injection. Available as granules.General information about SOLEF® PVDF: SOLEF® PVDF is a fluorinated semi-crysta..
|
|||
| CTE, linear | 120 µm/m-°C | 66.7 µin/in-°F | Above Tg |
|
EVALCA EVAL® K102 Ethylene Vinyl Alcohol Copolymer Resin
(discontinued **)
38 mol % Ethylene.Data provided by EVALCA. Applications: Solid phase pressure forming. EVOH is used in packaging applications because of its outstanding gas barrier properties.EVAL™ is now produc..
|
|||
| CTE, linear |
120
µm/m-°C @Temperature 20.0 °C |
66.7
µin/in-°F @Temperature 68.0 °F |
DIN 53752 |
|
GEHR Plastics POM-C Acetal
Polyoxymethylene can be used in temperatures up to 100°C. The high surface strength is only surpassed by a few materials. POM shows good sliding properties and high resistance to wear and tear be..
|
|||
| CTE, linear |
120
µm/m-°C @Temperature 20.0 °C |
66.7
µin/in-°F @Temperature 68.0 °F |
DIN 53752 |
|
GEHR Plastics PVDF Polyvinylidene Fluoride
Polyvinylidene fluoride shows a higher tensile strength, pressure resistance and dimensional stability than the related PTFE, but friction and insulation properties are lower. PVDF has a high mechan..
|
|||
| CTE, linear | 120 µm/m-°C | 66.7 µin/in-°F | Alpha 2 |
|
Lord Adhesives Thermosetâ„¢ ME-542 Underfill Encapsulant
LORD Thermosetâ„¢ ME-542 encapsulant is an anhydridefree, thermally conductive, semiconductor grade epoxy underfill product developed for the encapsulation of densely populated area array flip ch..
|
|||
| CTE, linear |
120
µm/m-°C @Temperature -30.0 - 30.0 °C |
66.7
µin/in-°F @Temperature -22.0 - 86.0 °F |
ASTM E831 |
|
A. Schulman POLYPUR™ FPU 1109 Thermoplastic Polyurethane Compound
Information provided by A. Schulman.
|
|||
| CTE, linear |
120
µm/m-°C @Temperature -30.0 - 30.0 °C |
66.7
µin/in-°F @Temperature -22.0 - 86.0 °F |
ASTM E831 |
|
A. Schulman POLYPUR™ FPU 1112 Thermoplastic Polyurethane Compound (15% Glass)
Information provided by A. Schulman.
|
|||
| CTE, linear |
120
µm/m-°C @Temperature 23.0 - 55.0 °C |
66.7
µin/in-°F @Temperature 73.4 - 131 °F |
ISO 11359-2 |
|
Polyplastics Duracon® TD-35 Acetal Co-polymer (POM), High impact, Flexible
DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O)..
|
|||
| CTE, linear |
120
µm/m-°C @Temperature 23.0 - 55.0 °C |
66.7
µin/in-°F @Temperature 73.4 - 131 °F |
ISO 11359-2 |
|
Polyplastics Duracon® WR-01 Acetal Co-polymer (POM), Chlorine water resistance
DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O)..
|
|||
| CTE, linear | 120 µm/m-°C | 66.7 µin/in-°F | ISO 11359-2 |
|
Unitika EX-1030 PA6, Dry
High-impact nylonInformation provided by Unitika Ltd.
|
|||
| CTE, linear |
120
µm/m-°C @Temperature 20.0 °C |
66.7
µin/in-°F @Temperature 68.0 °F |
|
|
Cytec EN-2527 (Conap) Potting and Encapsulation Adhesive
Polyurethane Potting and Encapsulating SystemsConathane® EN-2500 series polyurethane potting and encapsulating systems from Cytek have varying degrees of worklife, viscosity and hardness for many s..
|
|||
| CTE, linear |
120
µm/m-°C @Temperature 23.0 - 60.0 °C |
66.7
µin/in-°F @Temperature 73.4 - 140 °F |
ASTM D696 |
|
Daikin NEOFLON AP-210 PFA Pellets
NEOFLON PFA pellets have good melt flowability, and can be processed in the same manner as other thermoplastic resins.Applications: Injection molded parts, wire insulation, etc.Information provided ..
|
|||
| CTE, linear | 120 µm/m-°C | 66.7 µin/in-°F | ISO 11359 |
|
BLUESTAR BS130 Acetal Copolymer
Information provided by Polymer Technology and Services, LLC (PTS).
|
|||
| CTE, linear |
120
-
140
µm/m-°C @Temperature 20.0 °C |
66.7
-
77.8
µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
|
Solvay Specialty Polymers Solef® 1008 PVDF Homopolymer
(discontinued **)
Key features of this grade: Low Viscosity, All Purpose, Injection, Virgin. Recommended processing is injection. Available as powder & granules.General information about SOLEF® PVDF: SOLEF® PVDF ..
|
|||
| CTE, linear |
120
-
140
µm/m-°C @Temperature 20.0 °C |
66.7
-
77.8
µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
|
Solvay Specialty Polymers Solef® 1012 PVDF Homopolymer
(discontinued **)
Key features of this grade: High Viscosity, Virgin. Recommended processing is extrusion. Available as powder & granules.General information about SOLEF® PVDF: SOLEF® PVDF is a fluorinated semi-c..
|
|||
| CTE, linear | 120 µm/m-°C | 66.7 µin/in-°F | ISO 11359 |
|
PTS POM-270 Acetal Copolymer
Information provided by PTS LLC.
|
|||
| CTE, linear |
120
µm/m-°C @Temperature 23.0 - 55.0 °C |
66.7
µin/in-°F @Temperature 73.4 - 131 °F |
ISO 11359-2 |
|
Polyplastics Duracon® M90-45 Acetal Co-polymer (POM), Weather resistance, General
DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O)..
|
|||
| CTE, linear |
120
µm/m-°C @Temperature 23.0 - 55.0 °C |
66.7
µin/in-°F @Temperature 73.4 - 131 °F |
ISO 11359-2 |
|
Polyplastics Duracon® M90-71 Acetal Co-polymer (POM), Heat resistance
DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O)..
|
|||
Copyright © lookpolymers.com All Rights Reserved