Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : CTE, linear = 70.0 µm/m-°C Product List

Thermal Properties

Tips: 30 items are displayed at most.
Thermal Properties Metric English Comments
CTE, linear 70.0 - 90.0 µm/m-°C
38.9 - 50.0 µin/in-°F
Polykemi
Polykemi AB POLYfill PP CQX30030 RTX Polypropylene, Mineral Reinforced, Scratch Resistant
Information provided by Polykemi AB
CTE, linear 70.0 - 90.0 µm/m-°C
38.9 - 50.0 µin/in-°F
Polykemi
Polykemi AB POLYfill PPC TS20020 Polypropylene Copolymer, Mineral Reinforced
Information provided by Polykemi AB
CTE, linear 70.0 - 90.0 µm/m-°C
38.9 - 50.0 µin/in-°F
Polykemi
Polykemi AB POLYfill PPC TS20020 UV Polypropylene Copolymer, Mineral Reinforced, UV-Stabilized
Information provided by Polykemi AB
CTE, linear 70.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
 38.9 µin/in-°F

@Temperature -22.0 - 86.0 °F
 TMA
SABIC Innovative Plastics Lexan® BPL1000 PC (Asia Pacific)
Lexan* BPL1000 Polycarbonate (PC) resin is an injection moldable grade featuring high flow and good impact peroformance. It contains non-chlorinated and non-brominated flame retardant systems with U..
CTE, linear 70.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
 38.9 µin/in-°F

@Temperature -22.0 - 86.0 °F
 TMA
SABIC Innovative Plastics Lexan® ML1665 PC (Asia Pacific)
CTE, linear 70.0 µm/m-°C

@Temperature 20.0 °C
 38.9 µin/in-°F

@Temperature 68.0 °F
 ASTM D696
Covestro Apec® DP9-9340R High-Heat Polycarbonate, Medical with Release  (discontinued **)
It is the responsibility of the medical device, biological product, or pharmaceutical manufacturer (Manufacturer) to determine the suitability of all component parts and raw materials, including the..
CTE, linear 70.0 µm/m-°C

@Temperature 20.0 °C
 38.9 µin/in-°F

@Temperature 68.0 °F
 ASTM D696
Covestro Apec® DP9-9343 High-Heat Polycarbonate, UV Stabilized  (discontinued **)
Information provided by Bayer Corporation, Plastics DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and has officially adopted its new name – Covestro. This produ..
CTE, linear 70.0 µm/m-°C

@Temperature 20.0 °C
 38.9 µin/in-°F

@Temperature 68.0 °F
 ASTM D696
Covestro Apec® DP9-9354 High-Heat Polycarbonate, Flame-Retardant  (discontinued **)
Information provided by Bayer Corporation, Plastics DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and has officially adopted its new name – Covestro. This produ..
CTE, linear 70.0 µm/m-°C

@Temperature 20.0 °C
 38.9 µin/in-°F

@Temperature 68.0 °F
 DIN 53752; ASTM D696
Kolon KOPA® KN3322VO Flame Retardant Nylon 66
KOPA® is a thermoplastic resin with excellent mechanical, thermal and electrical properties and is widely used in the automobile, electrical and industrial parts.High tensile strength, outstandin..
CTE, linear 70.0 µm/m-°C
38.9 µin/in-°F
ASTM D696
Lucite International XL Sanitary Ware Acrylic Sheet
Lucite® XL continuous-cast cross-linked acrylic sheet is specially formulated for deep-draw thermoforming. It is used primarily for production of spas.Benefits: Smooth surface; Infinite colors an..
CTE, linear 70.0 µm/m-°C

@Temperature -30.0 - 100 °C
 38.9 µin/in-°F

@Temperature -22.0 - 212 °F
 ASTM D696
LyondellBasell Hifaxâ„¢ CB276 Thermoplastic Polyolefin Elastomer
Description: Hifaxâ„¢ CB276 very high melt flow, 1,200 MPa flexural modulus, UV-stabilized, precolored, mineral-filled thermoplastic elastomeric olefin (TEO) resin has a very good combination of ..
CTE, linear 70.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
 38.9 µin/in-°F

@Temperature -22.0 - 86.0 °F
 TMA
SABIC Innovative Plastics NORYL SE100V PPE+HIPS (Asia Pacific)
CTE, linear 70.0 µm/m-°C

@Temperature 20.0 °C
 38.9 µin/in-°F

@Temperature 68.0 °F
Solvay Technyl® C 206 Nylon 6, EH0
Unreinforced Plyamide PA6, standard for fast cycling, for injection molding.Technyl C 206 has high fluidity and good mold release, favored by a high crystallization rate. It is specially suitable f..
CTE, linear 70.0 - 80.0 µm/m-°C

@Temperature 20.0 - 100 °C
 38.9 - 44.4 µin/in-°F

@Temperature 68.0 - 212 °F
 DIN 53752
Schwartz Technical Plastics LAMIGAMID® 307 Cast Polyamide 6, Heat Stabilized, Conditioned
Application: slippers, inserts for coupling boxesInformation provided by Schwartz Technical Plastics GmbH
CTE, linear 70.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
 38.9 µin/in-°F

@Temperature -22.0 - 86.0 °F
 TMA
SABIC Innovative Plastics Noryl N1150 PPE+HIPS (Asia Pacific)
This data was supplied by SABIC-IP for the Asia Pacific region.
CTE, linear 70.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
 38.9 µin/in-°F

@Temperature -22.0 - 86.0 °F
 TMA
SABIC Innovative Plastics NORYL N190HF PPE+HIPS (Asia Pacific)
CTE, linear 70.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
 38.9 µin/in-°F

@Temperature -22.0 - 86.0 °F
 TMA
SABIC Innovative Plastics NORYL PX2801Z PPE+HIPS (Asia Pacific)
PPE+HIPS Unfilled FR V-0 100C
CTE, linear 70.0 - 75.0 µm/m-°C
38.9 - 41.7 µin/in-°F
Master Bond MB306 Low Viscosity Methyl Cyanoacrylate
Features superior bonding properties. Master Bond MB306 is a single component, low viscosity, rapid setting, methyl cyanoacrylate adhesive. Similar to other types of “super glue”, MB306 cures ver..
CTE, linear 70.0 µm/m-°C

@Temperature 23.0 - 55.0 °C
 38.9 µin/in-°F

@Temperature 73.4 - 131 °F
 ISO 11359-2
Polyplastics Duranex® 6370B Polybutylene Terephthalate (PBT), Anisotropy improvement, 30% GB filled
DURANEX® is a crystalline thermoplastic based on polybutylene terephthalate (PBT) that can be readily strengthened, modified, or otherwise performance enhanced through the addition of glass fibers ..
CTE, linear 70.0 µm/m-°C

@Temperature 20.0 °C
 38.9 µin/in-°F

@Temperature 68.0 °F
 ASTM E831
Zeon Chemicals Zeonor® 1060R Cyclo Olefin Polymer
Zeonor® is a line of thermoplastic polyolefin resin with an excellent combination of optical and electronic properties. These unique Cyclo Olefin Polymer (COP) was developed by Zeon Corporation usi..
CTE, linear 70.0 µm/m-°C
38.9 µin/in-°F
Absolute Drying; ASTM-D696
Toyobo GLAMIDE® T-808-02 Nylon-6
GLAMIDE® is very tough and exhibits high abrasion resistance. It has a high melting point and heat resistance, has well-balanced proportions of mechanical properties, performs self-distinguishing a..
CTE, linear 70.0 µm/m-°C

@Temperature 20.0 °C
 38.9 µin/in-°F

@Temperature 68.0 °F
 ASTM D696
Toyobo VYLOPET® EMC605P PBT/PET Alloy, Anti-microbial
Applications: Gas equipment partsFeatures: Good anti-microbialGood appearanceFlame resistantInformation provided by Toyobo.
CTE, linear 70.0 µm/m-°C

@Temperature 20.0 °C
 38.9 µin/in-°F

@Temperature 68.0 °F
 ASTM D696
Eastman Spectar® 14471 Copolyester
Spectar copolyester extrudes into plastic sheet that is sparkling clear, tough, chemically resistant, odor-free, versatile, easy to work with and affordable. Its toughness allows fabricators to use ..
CTE, linear 70.0 µm/m-°C

@Temperature -30.0 - 60.0 °C
 38.9 µin/in-°F

@Temperature -22.0 - 140 °F
 ASTM D696
Asahi Kasei Xyron® 500Z Modified Polyphenylene Ether
Flame RetardantInformation provided by Asahi Kasei
CTE, linear 70.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
 38.9 µin/in-°F

@Temperature -22.0 - 86.0 °F
 ASTM D696
Beijing Chemical Industry KAIFA® M104N MPPO Resin
High flame retardant, Good flowInformation provided by Beijing Chemical Industry Research Institute (Group)
CTE, linear 70.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
 38.9 µin/in-°F

@Temperature -22.0 - 86.0 °F
 ASTM D696
Beijing Chemical Industry KAIFA® M105N MPPO Resin
High flame retardant, Thermal resistantInformation provided by Beijing Chemical Industry Research Institute (Group)
CTE, linear 70.0 µm/m-°C

@Temperature 20.0 °C
 38.9 µin/in-°F

@Temperature 68.0 °F
 ISO 11359
Teijin Panlite® LD-1000RM High Light Reflection Polycarbonate Resin
Polycarbonate-resin-base good light-reflection grade. It exhibits high light-reflection (over 96 %) at whole visible light range and also light shut-out even at a thinner thickness portion.Applicati..
CTE, linear 70.0 µm/m-°C

@Temperature 20.0 °C
 38.9 µin/in-°F

@Temperature 68.0 °F
 ASTM D696
Covestro Bayblend® 2253 Polycarbonate + ABS Blend, Extrusion  (discontinued **)
Properties tested in transverse direction (worst case) on 125-mil (3.2 mm) extruded sheets specimens with
CTE, linear 70.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
 38.9 µin/in-°F

@Temperature -22.0 - 86.0 °F
 TMA
SABIC Innovative Plastics Lexan® LX2801 PC (Asia Pacific)
CTE, linear 70.0 µm/m-°C

@Temperature 23.0 - 85.0 °C
 38.9 µin/in-°F

@Temperature 73.4 - 185 °F
 DAM; ISO 11359
Solvay Technyl® A 402 H1 Nylon 66
Unreinforced, very high viscosity, heat stabilized, for extrusion and injection molding. TECHNYL® A 402 H1 offers three main advantages: high impact resistance at low humidity levels, good rigidit..
Copyright © lookpolymers.com All Rights Reserved