Polymer Property : Thermal Conductivity = 1.94 BTU-in/hr-ft²-°F Product List

Thermal Properties

Tips: 30 items are displayed at most.

Thermal Properties	Metric	English	Comments
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F
Murtfeldt Murlubric® Oil Modified Nylon 6 Murlubric® is a modified cast polyamide that mineral oil is integrated into during polymerization. As a result, the material has self lubricating properties and retains its excellent characteristi..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F
Murtfeldt Murylon® A Nylon 66 This material combines the excellent properties of the Murylon® range with additional high tensile and compressive strength, increased wear resistance, and a lower level of moisture absorption than..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F	DIN.52612 (dry sample)
Omnia Plastica Akulon® PA6 G.Oil - Omniamid Oil - at 50% RH Cast Nylon 6 with the addition of 6% of special lubricating oil which remains in solution in the material. The unique method of production results in a micro distribution of oil particles with a hom..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F	DIN.52612
Omnia Plastica Akulon® PA6 G.Oil Omniamid Oil - Dry Cast Nylon 6 with the addition of 6% of special lubricating oil which remains in solution in the material. The unique method of production results in a micro distribution of oil particles with a hom..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F	DIN.52612 (dry sample)
Omnia Plastica Omniamid PA6 G - G - at 50% RH Cast nylon 6. The method of production of this polyamide (i.e. the polymerisation of the caprolactam directly in the mould) allows the production of stock shapes in larger than normal dimensions, su..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F
Quadrant EPP Ertalon® 6 SA PA 6, extruded (ISO Data) This material offers an optimal combination of mechanical strength, stiffness, toughness, mechanical damping properties and wear resistance. These properties, together with good electrical insulatin..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F
Quadrant EPP Nylatron® MD PA 6 + metal detectable additive, extruded (ISO Data) Metal detectable 6SA grade High wear and fatigue resistance Lower moisture absorption than standard PA6 Metal and visual detection by blue colour Detection by x-ray also possible Continuous use temp..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ftÂ²-Â°F	DOM 52612
Manifattura Cattaneo PA 6 Nylon Manifattura Cattaneo products are available in semi-finished forms such as bars, profiles, sheets and plates.Information provided by Manifattura Cattaneo s.p.a.
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ftÂ²-Â°F	DIN 52612
GEHR Plastics PA 6.6 Nylon 6.6, Dry Polyamide shows both a high thermostability and high stiffness, hardness and toughness. These are some of the main characteristics. Due to the fact, that the good mechanical characteristics will be ..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ftÂ²-Â°F	ISO 8302
SABIC Innovative Plastics NORYL SE1GFN2 PPE+HIPS (Europe-Africa-Middle East) Noryl* SE1GFN2 is a 20% glass reinforced, injection moldable modified polyphenylene ether resin. Designed for improved dimensional stability and good flow , this resin also uses non-chlorinated, non..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ftÂ²-Â°F	ISO 8302
SABIC Innovative Plastics NORYL V01525 PPE+HIPS Noryl* V01525 is a 15% milled fiber reinforced, injection moldable grade. Designed for good dimensional stability and low warpage, this resin also uses non-chlorinated, non-brominated FR additives t..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ftÂ²-Â°F	ISO 8302
SABIC Innovative Plastics NORYL V02570 PPE+HIPS (Europe-Africa-Middle East) Noryl* V02570 is a 25% milled fiber reinforced, injection moldable grade. Designed for good dimensional stability and low warpage, this resin also uses non-chlorinated, non-brominated FR additives t..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ftÂ²-Â°F	ISO 8302
SABIC Innovative Plastics NORYL V03505 PPE+HIPS (Asia Pacific) Noryl* V03505 is a 35% milled fiber reinforced, injection moldable grade. Designed for good dimensional stability and low warpage, this resin also uses non-chlorinated, non-brominated FR additives t..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ftÂ²-Â°F	ISO 8302
SABIC Innovative Plastics ULTEM 2210F PEI (Europe-Africa-Middle East) 20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). Resin is RoHS compliant. US FDA and European Food Contact approved. Effective June, 2007 this grade will no longer be supported with b..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ftÂ²-Â°F	ASTM C177
Solvay Specialty Polymers AvaSpireÂ® AV-621 GF30 Polyaryletherketone (PAEK), 30% Glass Fiber AvaSpireÂ® AV-621 GF30 is a 30% glass fiber reinforced version of AvaSpireÂ® AV-621. This formulation offers better dimensional stability and lower warpage than 30% glass reinforced PEEK. This r..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ftÂ²-Â°F	ISO 8302
SABIC Innovative Plastics Ultem PW2200 PEI (Europe-Africa-Middle East) 20% Glass fiber filled, standard flow Polyetherimide (Tg 217Â°C). Product designed and certified for use in Potable Water applications. KTW, WRAS, ACS certified. NSF61 and W270 pending. US FDA and..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ftÂ²-Â°F	ASTM C-518
Sumitomo Bakelite North America RXÂ® 1-520/RXÂ® 1310 Short-Glass Reinforced Diallyl Phthalate Short glass fiber reinforced, non-flame retardant, diallyl ortho-phthalate molding compound which meets the requirements of ASTM D5948 Type SDG.Information provided by Vyncolit, a Sumitomo Bak Group..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ftÂ²-Â°F
Solvay Chemicals DIGLYCEROL Diglycerol is a clear viscous liquid very similar to glycerol. It has a higher molecular weight than glycerol and is less volatile. It is water soluble and can be combined with aqueous systems.EINEC..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F	DIN 52612
Zell-Metall Engineering Plastics Zellamid 1100 Zellamid® 1100 is the registered trademark for Zell-Metall’s cast nylon 6 in different qualities.Our standard quality is a heavy duty, high impact, wear and heat resistant polyamide. It offers ..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F	DIN 52612
Zell-Metall Engineering Plastics Zellamid 1100 MO Improved sliding and self lubricating properties are achieved by the addition of molybdenum disulphide. UV-radiation resistance is enhanced.Color: blackApplications: For conveyor screws
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F	DIN 52612
Zell-Metall Engineering Plastics Zellamid 1115 By special additives, impact strength and abrasion resistance are further improved. We particularly recommend this material for slipper pads for rolling mills.Color: IvoryApplications: slipper pads ..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F
Chevron Phillips Xtel® XE3035NA Polyphenylene Sulfide Alloy Xtel® XE3035NA is a high performance, glass fiber reinforced, PPS based alloy developed to provide exceptionally high ductility and impact resistance along with good thermal stability.Information p..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F	ASTM C 177
Adamas Adalon® 118 PTFE, 23/2% Carbon/Graphite Filled Information provided by Adamas, HPM
Thermal Conductivity	0.280 - 0.360 W/m-K	1.94 - 2.50 BTU-in/hr-ft²-°F
Arlon 0.008" (0.2032 mm) Primerless Thermabond® Uncured Silicone (99990A008) 0.008 in., ±0.001 (0.2 mm, ±0.03) uncured silicone on 0.003 in. (0.08 mm) nominal PTFE coated fiberglass; 0.001 in. (0.03 mm) FEP interleave; overall thickness 0.008 in ±0.001(0.2 mm ± 0.03). T..
Thermal Conductivity	0.280 - 0.360 W/m-K	1.94 - 2.50 BTU-in/hr-ft²-°F
Arlon 0.015" (0.381 mm) Primerless Thermabond® Uncured Silicone (99990A015) 0.015 in., ±0.001 (0.38 mm, ±0.038) uncured silicone on 0.003 in. (0.08 mm) nominal PTFE coated fiberglass; 0.001 in. (0.03 mm) FEP interleave; overall thickness 0.015 in ±0.001(0.38 mm ± 0.038)..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F	DIN 52612
BASF Ultramid® KR 4355 G7 35% Glass Filled PA6/6T (Conditioned) Description: 35% glass-fiber reinforced product for injection-molding; high toughness, strength and stiffness, low water absorption, high melting point (295°C [563°F]). The mechanical properties r..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F	DIN 52612
BASF Ultramid® KR 4355 G7 BK 00564 35% Glass Filled PA6/6T (Dry) Description: 35% glass-fiber reinforced product for injection-molding; high toughness, strength and stiffness, low water absorption, high melting point (295°C [563°F]). The mechanical properties r..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F
CENTROPLAST CENTROMID 6 GF 30 Polyamide 6 30% glass fiber The 30% glass fibre matrix adds very high strength and rigidity to this material. It has increased dimensional accuracy when hot. Can be used for rollers, belt pulleys and racks.Information provid..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F
CENTROPLAST CENTROPHEN GF Polyphenylene ether 30% glass fiber This material is a lightweight plastic with low moisture absorption, and is impact resistant at low temperatures. Applications include electronic housings, valve pistons, and support rollers.Inform..
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F	ASTM C 177
Adamas Adalon® 463 PTFE, 15% Special Polyimide Information provided by Adamas, HPM