- HOME
- POLYMER SEARCH
- Polymer Property : Maximum Service Temperature, Air = 121 °C
Polymer Property : Maximum Service Temperature, Air = 121 °C Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
|
Permabond HH190 Anaerobic Gasketmaker
Permabond® HH190 Gasketmaker is an anaerobic curing flange sealant that can replace, or be used as a dressing for, conventional pre-cut gaskets. Since HH190 is a flowable paste, it conforms to the ..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
|
Greene Tweed ARâ„¢ HT Abrasive-Resistant Thermoplastic
ARHT™ is a proprietary thermoplastic material specifically developed for use a sbushings, bearings and wear rings in pumps handling abrasive media up to 250°F (121°C). ARHT provides outs..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | dry |
|
ITW Devcon Epoxy HP 250, Straw
Information provided by ITW Devcon
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | dry |
|
ITW Devcon Plastic Steel® Metal Repair (A), Dark Grey
Information provided by ITW Devcon
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | wet |
|
ITW Devcon Rubber Repair / Castable Urethane High Temp Edge & Seal (T-36), Amber
Information provided by ITW Devcon
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
|
ITW Plexus Plexusâ„¢ MA1025 Methacrylate Adhesive
Two-part adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies.Low shrinkage, low odor, able to be used 1" thick.Information provided by Illinois Tool Works.
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
|
Master Bond EP21LVMed Two Component, Low Viscosity USP Class VI Epoxy
Master Bond EP21LVMed is a two component, low viscosity epoxy resin system for high performance bonding, sealing, coating, encapsulating and casting. It is formulated to cure readily at room tempera..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
|
Master Bond EP21ND Non Drip Room Temperature Curing Epoxy System
Master Bond Polymer System EP21ND is a two component, room temperature curing epoxy adhesive featuring outstanding physical properties. EP21ND can be mixed by weight or volume and is available in a ..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
|
Master Bond EP30DPMed USP Class VI, Two Component Epoxy Urethane System
Master Bond Polymer System EP30DPMED is a versatile, two component, epoxy-urethane elastomeric compound, featuring superior strength, toughness, and abrasion resistance for high performance bonding,..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
|
Master Bond MB306 Low Viscosity Methyl Cyanoacrylate
Features superior bonding properties. Master Bond MB306 is a single component, low viscosity, rapid setting, methyl cyanoacrylate adhesive. Similar to other types of “super glue”, MB306 cures ver..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
|
Master Bond EP30DP Abrasion Resistant Cryogenic Epoxy Urethane System
Master Bond Polymer System EP30DP is a versatile, two component, epoxy-urethane elastomeric compound, featuring superior strength, toughness, and abrasion resistance for high performance bonding, se..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
|
DuPont Teijin Films Mylar® OWF2 Polyester Film, 60 Gauge
Product Description: Mylar® OWF2 is a co-extruded, one side amorphous, heat sealable polyester film designed to be used as an overwrap film. Mylar® OWF2 has a thicker heat sealable layer than Myla..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
|
DuPont Teijin Films Mylar® RL43 Polyester Packaging Film, 100 Gauge
Data provided by DuPont Packaging Polymers.Mylar® RL43 is a biaxially oriented polyester (OPET) film with an ethylene vinyl acetate (EVA) heat seal layer. Mylar® RL43 is designed to produce stro..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | Short term |
|
3M 1026 Adhesive Transfer Tape
3M™ Adhesive Transfer Tape 1026 is a 300 high strength acrylic adhesive on a 4 mil liner. Adhesive transfer tape in a pre-cut, tape strip on a pad.Features:5.0 mil adhesive transfer tape on a pad. ..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | Short term |
|
3M 9464 Splicing Tape
3M™ Splicing Tape offers excellent flying splice and core starting wet grab characteristics. They are typically used in the printing industry and perform well at process speeds in excess of 2000 fe..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | Short Term |
|
3M 9832 Double Coated Tapes with Adhesive 300MP
3M™ Double Coated Tape 9832 with Adhesive 300MP is a general purpose tape that provides excellent adhesion to a wide variety of substrates, including many foams, plastics, foil, and felt. This tape..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | AMS-S83318 |
|
3M AC-250 A-1/6 Aerospace Sealant
3M Aerospace Sealant AC-250 A-1/6 is a two-part, low temperature curing polysulfide, quick repair sealant for integral fuel tank and fuselage sealing applications. The mixed compound is a pourable l..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | MIL-PRF-81733D |
|
3M AC-665 Class C-24 Aerospace Sealant
3M Aerospace Sealant AC-665 Class C are two-part, manganese-cured, chromate containing, corrosion inhabiting sealants. These Sealants provide an effective barrier against the common causes of corros..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | cured 14 days @ 50% RH |
|
3M AC-730 Class B-12 Aerospace Sealant
3M Aerospace Sealant AC-730 Class B are fast cure, two-part, manganese-cured, non-chromate containing corrosion inhabiting sealants. These Sealants provide an effective barrier against the common ca..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
|
Armstrong A-1/A Epoxy Adhesive
A brown epoxy paste formulated with enhanced wetting capabilities to hard rubbers and rigid thermoplastics. Has low outgassing characteristics at temperatures below 250°FInformation provided by El..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | for 30 mins |
|
3M Scotch® 218 Fine Line Tape
Scotch® Fine Line Tape 218 is a high-performance film backed tape with low profile and high adhesion to achieve excellent paint liens and for other masking and holding applications.Information prov..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
|
3M Scotch-Weld™ DP604NS Structural Adhesive
3M™ Scotch-Weld™ Urethane Adhesive DP-604NS is a black, rapid setting, two-component polyurethane. It is packaged as 1:1 ratio liquids in a duo-pak cartridge. With the squeeze of the trigger, the ..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
|
3M Scotch-Weld™ TE100 Polyurethane Reactive Adhesive
3M™ Scotch-Weld™ Polyurethane Reactive Adhesives are a family of one-component, moisture curing, urethane adhesives. These adhesives are applied warm and bond a wide variety of substrates such as ..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | Service |
|
3M 7801 Aluminum Foil Label Material
3M™Aluminum Foil Label Materials are durable, thin gauge, 1145 H19 aluminum designed to meet a wide range of difficult nameplate application requirements. 3M™Aluminum Foil Label Materials 7800, 78..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | Long term |
|
3M 93010LE High Strength Double Coated Tape with Adhesive 300LSE
3M ™ Double Coated Tapes with 3M™ Adhesive 300LSE provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene and powder coated paints. The acryl..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | Long term |
|
3M 93020LE High Strength Double Coated Tape with Adhesive 300LSE
3M ™ Double Coated Tapes with 3M™ Adhesive 300LSE provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene and powder coated paints. The acryl..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
|
3M Scotch-Weld™ MG250-55 UV Medical Grade Light Cure Adhesive
3M™ Scotch-Weld™ Medical Grade Light Cure Adhesive is a single component adhesive that cure to give clear bonds when exposed to appropriate ultraviolet or visible light. It contains a fluorescing ..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
|
3M 3513 Copper Foil Tape
EMI/RFI shielding. UL 510 Recognized.Information provided by 3M
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
|
3M 477 Vinyl Tape
3M™ Vinyl Tape 477 is comprised of a conformable, transparent vinyl backing with a versatile rubber adhesive. It is an excellent tape to use where abrasion resistance, transparency, conformability ..
|
|||
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
|
3M 97065 General Purpose Aluminum Foil Tape
60 lb. moisture stable liner. Good for die-cut applications.Information provided by 3M
|
|||
Copyright © lookpolymers.com All Rights Reserved