- HOME
- POLYMER SEARCH
- Polymer Property : Maximum Service Temperature, Air = 145 °C
Polymer Property : Maximum Service Temperature, Air = 145 °C Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 145 °C | 293 °F | short period, no load |
|
Omnia Plastica Akulon® POM h Acetal Homopolymer
The general features of homopolymer acetalic resin are similar to those of copolymer POM c, except that service temperature (under load) is slightly higher but resistance to hydrolysis and strong al..
|
|||
| Maximum Service Temperature, Air | 145 - 155 °C | 293 - 311 °F | Softening Range |
|
Huntsman Araldite GT 6609 US Bisphenol A Epoxy Solid Resin
Weight per Epoxide (EEW, g/eq) 2300 to 2800. Max color is 2.Comments/Applications: Unmodified bis A "Type 9" epoxy. Lower molecular weight GT 6610 US. High melt viscosity epoxy for high quality i..
|
|||
| Maximum Service Temperature, Air | 145 - 155 °C | 293 - 311 °F | Softening Range |
|
Huntsman Araldite GT 6610 US Bisphenol A Epoxy Solid Resin
Weight per Epoxide (EEW, g/eq) 2800 to 3800. Max color is 2.Comments/Applications: Unmodified bis A "Type 9" epoxy. Highest molecular weight solid epoxy resin. High melt viscosity epoxy for high ..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | |
|
Industrial Laminates/Norplex NP315 Cotton Fabric
Description: Canvas phenolic laminate with graphite added as a solid lubricant. This material has improved wear properties under certain conditions. Material is conductive to electricity and should ..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | |
|
LATI Laramid G/35 PPA, 35% Glass Fiber Reinforced
Semi-aromatic polyamide (PPA) based compound. Glass fibers. Very good thermal properties. Good chemical resistance. Low moisture absorption.Availability: Africa & Middle East; Asia Pacific; Europe; ..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | |
|
LATI Latigloss 57 G/40 F2 PPA, 40% Glass Fiber Reinforced
Product with high mechanical properties and exceptional surface finish based on Semi-aromatic polyamide (PPA). Glass fibers. Potentially suitable for food/medical contact applicationAvailability: Af..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | |
|
Tra-Con Tra-Bond FDA16 Food and Drug Application Epoxy Adhesive
TRA-BOND FDA-16 EPOXY ADHESIVE is a medium viscosity epoxy resin system specifically developed for medical device applications. It has been tested in accordance with USP biological reactivity tests,..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | |
|
Tra-Con Tra-Bond FDA22 Food and Drug Application Epoxy Adhesive
TRA-BOND FDA-22 is a high viscosity epoxy resin system specifically developed for bonding and coating applications in accordance with Title 21, U.S. Code of Federal Regulations, Food and Drug Admini..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | |
|
Tra-Con Tra-Bond FDA22BK01 Food and Drug Application Epoxy Adhesive
TRA-BOND FDA-22BK01 is a high viscosity epoxy resin system specifically developed for bonding and coating applications in accordance. This two-part black adhesive is easily mixed, used and cured at ..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | |
|
Tra-Con Tra-Bond FDA2T Food and Drug Application Epoxy Adhesive
TRA-BOND FDA-2T is a thixotropic epoxy resin system specifically developed for medical device applications. It has been tested in accordance with USP biological reactivity tests, in vivo and receive..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | |
|
Tra-Con Tra-Bond FDA2YL02 Food and Drug Application Epoxy Adhesive
TRA-BOND FDA-2 YL02 is a medium viscosity epoxy resin system specifically developed for adhesive and coating applications in accordance with Title 21, U.S. Code of Federal Regulations, Food and Drug..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | |
|
Tra-Con Tra-Bond FDA8T Food and Drug Application Thixotropic Flexible Epoxy Adhesive
TRA-BOND FDA-8T EPOXY ADHESIVE is a thixotropic epoxy resin system specifically developed for bonding applications in accordance with Title 21, U.S. Code of Federal Regulations, Food and Drug Admini..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | |
|
Tra-Con Tra-Cast 3103 General Purpose Epoxy Casting Compound
TRA-CAST 3103 is a low viscosity two-part formulation recommended for general purpose electrical potting and encapsulating application where the combination of good mechanical thermal and electrical..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | |
|
Tra-Con Tra-Cast 3113 General Purpose Epoxy Casting Compound
TRA-CAST 3113 is a low viscosity two-part formulation recommended for general purpose electrical potting and encapsulating applications where the combination of good mechanical thermal and electrica..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | |
|
Tra-Con Tra-Bond FDA12WH01 Food and Drug Application Epoxy Adhesive
TRA-BOND FDA12 WH01 is a medium viscosity epoxy resin system specifically developed for bonding and coating applications in accordance with Title 21, U.S. Code of Federal Regulations, Food and Drug ..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | |
|
Tra-Con Tra-Bond RO7 Radio Opaque Epoxy Adhesive
TRA-BOND RO-7 is a high viscosity epoxy resin system specifically developed for adhesive and coating applications where radio opacity is required. It can be used as an X-ray marker on in-vitro medic..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | few hours; VDE 0304/P2-1, IEC 216 |
|
EPICHEM Epilon G4-PC 20% GF Polycarbonate, 20% Glass Fiber
Characteristics: 20% glass fibre filled, excellent mechanical properties
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | for 50% loss of tensile strength after 20000hr |
|
BASF Ultramid® B3WG7 BK 00564 35% Glass Filled PA6 (Conditioned)
Description: 35% glass-fiber reinforced and heat aging resistant injection-molding grade, e.g. for automotive manifolds and pedals.Information provided by BASF
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | |
|
Atom Adhesives AA-BOND FDA22 Epoxy Adhesive
AA-BOND FDA22 is a high viscosity epoxy resin system specifically developed for bonding and coating applications in accordance with Title 21, U.S. Code of Federal Regulations, Food and Drug Administ..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | for 50% loss of tensile strength after 20000hr |
|
BASF Ultramid® A3WG10 BK 00564 50% Glass Filled PA66 (Conditioned)
Description: 50% glass-fiber reinforced injection-molding grade with high heat aging resistance for technical articles of very high stiffness.Information provided by BASF
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | for 50% loss of tensile strength after 20000hr |
|
BASF Ultramid® A3WG3 15% Glass Filled PA66 (Dry)
Description: 15% Glass-fiber reinforced and heat aging resistant injection-molding grade for machine elements and housings of medium stiffness. For electric insulating parts, preference should be gi..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | for 50% loss of tensile strength after 20,000 hr |
|
BASF Ultramid® A3WG5 25% Glass Filled PA66 (Conditioned)
Ultramid A3WG5 is a 25% glass fiber reinforced and heat resistance injection molding PA66 grade.
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | |
|
Atom Adhesives AA-BOND FDA16 Epoxy Adhesive
AA-BOND FDA16 is a medium viscosity epoxy resin system specifically developed for medical device applications. AA-BOND FDA16 has been tested in accordance with USP biological reactivity tests, in vi..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | for 50% loss of tensile strength after 20000hr |
|
BASF Ultramid® B3WG10 BK 00564 50% Glass Filled PA6 (Dry)
Description: 50% glass-fiber reinforced and heat aging resistant injection-molding grade for technical parts with very high stiffness.Information provided by BASF
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | for 50% loss of tensile strength after 20000hr |
|
BASF Ultramid® B3WG5 25% Glass Filled PA6 (Conditioned)
Description: 25% glass-fiber reinforced and heat aging resistant injection-molding grade, for instance, for fan impeller glass-fiber reinforced injection-molding grade for industrial articles and el..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | for 50% loss of tensile strength after 20000hr |
|
BASF Ultramid® B3WG5 25% Glass Filled PA6 (Dry)
Description: 25% glass-fiber reinforced and heat aging resistant injection-molding grade, for instance, for fan impeller glass-fiber reinforced injection-molding grade for industrial articles and el..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | for 50% loss of tensile strength after 20000hr |
|
BASF Ultramid® B3WG5 BK 00564 25% Glass Filled PA6 (Conditioned)
Description: 25% glass-fiber reinforced and heat aging resistant injection-molding grade, for instance, for fan impeller glass-fiber reinforced injection-molding grade for industrial articles and el..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | for 50% loss of tensile strength after 20000hr |
|
BASF Ultramid® B3WG5 BK 00654 PA6 25% Glass Filled BK (Dry)
Description: 25% glass-fiber reinforced and heat aging resistant injection-molding grade, for instance, for fan impeller glass-fiber reinforced injection-molding grade for industrial articles and el..
|
|||
| Maximum Service Temperature, Air | 145 °C | 293 °F | for 50% loss of tensile strength after 20,000 hr |
|
BASF Ultramid® B3WG6 30% Glass Filled PA6 (Dry)
Ultramid B3WG6 is a 30% glass fiber reinforced, heat stabilized injection molding PA6 grade.
|
|||
Copyright © lookpolymers.com All Rights Reserved