Polymer Property : Maximum Service Temperature, Air = 180 °C Product List

Thermal Properties

Tips: 30 items are displayed at most.

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	180 °C	356 °F	Intermittent
Nylacast H.S. Blue Cast Nylon 6, Heat Stabilized HS Blue is a heat Stabilised Cast Nylon 6. Its mechanical properties are maintained when operating at higher temperature and improves mechanical properties. This helps to reduce the stress distortio..
Maximum Service Temperature, Air	180 °C	356 °F
Precision Polymer Engineering Z70M Hydrogenated NBR Compound Brown Hydrogenated Nitrile Rubber, 65-75 °IRHD. Medium acrylonitrile (ACN) content. ASTM designation = HNBR. ASTM D2000 line call-out 2MDH708, A26, B36, EO16, EO36, F14, Z1, where Z1 = Brown.Appl..
Maximum Service Temperature, Air	180 °C	356 °F
Precision Polymer Engineering Z85L Hydrogenated NBR Compound Peroxide Cured, Hydrogenated Nitrile Rubber, 81-90 °IRHD. Low acrylonitrile content.Applications: Specially compounded for service in low-temperature applications. High strength and excellent chem..
Maximum Service Temperature, Air	180 Â°C	356 Â°F	short term
Lehmann & Voss LUVOCOMÂ® 1800-8435 PET, with PTFE Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.Isotropic shrinkage characteri..
Maximum Service Temperature, Air	180 Â°C	356 Â°F
Lehmann & Voss LUVOCOMÂ® 1100-7890 Polyether sulfone, with carbon fiber Applications: Apparatus- and precision engineering, film- and photo industry, sporting- and leisure goods, medical- and electrical enineering, aircraft- and aerospace industry.High dimensionally sta..
Maximum Service Temperature, Air	180 Â°C	356 Â°F	Intermittent
Schwartz Technical Plastics LAMIGAMIDÂ® 320 Cast Polyamide 6, Dry Application: heavy-duty wheelsInformation provided by Schwartz Technical Plastics GmbH
Maximum Service Temperature, Air	180 - 300 Â°C	356 - 572 Â°F
SMAC CABLEÂ® 2513S-10-10 Damping Material The SMAC CABLEÂ® wire rope isolators are entirely metallic and possess multi-axis characteristics. They are well adapted for the isolation of materials exposed to shock and vibration in harsh envi..
Maximum Service Temperature, Air	>= 180 °C	>= 356 °F	Short peaks operation
Polyram PlusTek PA600 Nylon 6.6, Heat Stabilized Heat stabilized polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Maximum Service Temperature, Air	>= 180 °C	>= 356 °F	Short peaks operation
Polyram PlusTek PA700BL10 Nylon 6.6 for Injection Molding, UV Stabilized UV Stabilized Nylon 6.6 for injection molding applications.Information provided by Polyram.
Maximum Service Temperature, Air	>= 180 °C	>= 356 °F	Short peaks operation
Polyram PlusTek PA841 Nylon 6.6, Impact Modified Impact modified polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Maximum Service Temperature, Air	180 °C	356 °F	Short peaks operation
Polyram PlusTek PB340S6 Nylon 6, 30% Glass beads 30% glass beads reinforced polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Maximum Service Temperature, Air	180 °C	356 °F
Trelleborg Emerson & Cuming Eccobond® 2780-45 One-Component High Temperature Performance Epoxy Adhesive Emerson & Cuming 2780-45 Eccobond® One-Component High Temperature Performance Epoxy AdhesiveFilled, pourable, high temperature resistant, epoxy adhesive. Long term resistance to boiling glycol. Exc..
Maximum Service Temperature, Air	180 °C	356 °F
Dow Corning 752 ADHESIVE/SEALANT General purpose silicone adhesive/sealantInformation provided by Dow Corning
Maximum Service Temperature, Air	180 °C	356 °F
Dow Corning MOLYKOTE® AS-810 GREASE Silicone grease with wide service temperature range for starter clutchInformation provided by Dow Corning
Maximum Service Temperature, Air	180 °C	356 °F	short term; EMS
EMS-Grivory Grivory® BM-30 PA6-MD30 Product description: Grilon BM-30 is a 30% mineral reinforced PA6 injection moulding grade. Grilon BM-30 has the following important properties: heat stabilizedimpact resistantisotropic shrinkagelig..
Maximum Service Temperature, Air	180 °C	356 °F	short term; EMS
EMS-Grivory Grivory® BS PA6 Product description: Grilon BS is an unreinforced, heat stabilized standard PA6 injection molding grade with normal melt viscosity. Grilon BS has the following important properties: Good flow behavi..
Maximum Service Temperature, Air	180 °C	356 °F	short term; EMS
EMS-Grivory Grivory® TSM-40/4 PA666-MD40 Product description: Grilon TSM-40/4 is a special heat stabilized, normal viscosity PA66 + PA6 injection molding grade with 40% mineral filler. Grilon TSM-40/4 has the following important properties..
Maximum Service Temperature, Air	180 °C	356 °F	short term; EMS
EMS-Grivory Grivory® TSZ 1 PA666 Product description: Grilon TSZ 1 is a heat stabilized, normal viscosity, impact modified PA66 + PA6 injection molding grade. Grilon TSZ 1 has the following important properties: Excellent flow beha..
Maximum Service Temperature, Air	180 °C	356 °F	few hours; VDE 0304/P2-1, IEC 216
EPICHEM PA 6 Polyamide 6 Characteristics: medium viscosity, general purpose
Maximum Service Temperature, Air	180 °C	356 °F	Two Hour Heat Resistance per ASTM D648
Chang Chun Plastic Longlite PM T33J General Purpose Phenolic Molding Compound ASTM Grades per ASTM D700 are 2,3.Information provided by Dowell Trading Company Ltd.
Maximum Service Temperature, Air	180 °C	356 °F
Dow Corning 3-0100 AUTOMOTIVE SEALANT One-part RTV, neutral cure, excellent unprimed adhesion, automotive oil resistant, and low volatilityInformation provided by Dow Corning
Maximum Service Temperature, Air	180 °C	356 °F
Rogers Corporation Bisco® A2 R 1.5 Engineered Solid Silicone Mass Layer, Fiberglass Reinforced Sound Barrier BISCO® A2 Fiberglass Reinforced Sound Barrier provides a similar level of sound absorption and flame resistance as the non-reinforced A2 Sound Barrier with the addition of increased tensile and tea..
Maximum Service Temperature, Air	180 - 200 °C	356 - 392 °F	Average value: 189 °C Grade Count:9
Overview of materials for Polyethersulfone (PES), 10% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyethersulfone (PES), 10% Glass Fiber Filled". Specific grades with glass content between 5% and 14% a..
Maximum Service Temperature, Air	180 °C	356 °F
BASF Ultramid® B3S BK00464 PA6 (Conditioned) Description: Easy flowing, finely crystalline injection-molding grade for very fast processing. Uses include thin-walled technical parts (eg. housings, fittings, grips, small parts and fixing clamps..
Maximum Service Temperature, Air	180 °C	356 °F	Short term
CENTROPLAST CENTROMID 6.6 Polyamide 6.6 This material has good hardness, wear resistance, abrasion strength and impact strength. It is used for bearing cages, sliding bearings and articulated joint blocks.Information provided by CENTROPL..
Maximum Service Temperature, Air	180 °C	356 °F	Two Hour Heat Resistance per ASTM D648
Chang Chun Plastic Longlite PM T385J General Purpose Phenolic Molding Compound ASTM Grades per ASTM D700 are 2, 3.Information provided by Dowell Trading Company Ltd.
Maximum Service Temperature, Air	180 - 300 °C	356 - 572 °F
SMAC CABLE® 2519S-20-08 Damping Material The SMAC CABLE® wire rope isolators are entirely metallic and possess multi-axis characteristics. They are well adapted for the isolation of materials exposed to shock and vibration in harsh enviro..