Polymer Property : Maximum Service Temperature, Air = 203 °F Product List

Thermal Properties

Tips: 30 items are displayed at most.

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	95.0 °C	203 °F	Maximum operating temperature continuously for 5000 hours based on a tensile stress of 50% at 23° C. (dry sample)
Omnia Plastica Akulon® PA 66 - Akulon 66 - at 50% RH Polyamide obtained by the polymerisation of Hexamethylenediamine and Adipic acid. It is one of the oldest engineering plastics, having been created in the USA in 1930. Due to its origin it is widely..
Maximum Service Temperature, Air	95.0 °C	203 °F	Continuous; 5,000 h
Quadrant EPP Ertalon® 66 SA PA 66, extruded (ISO Data) Material with a higher mechanical strength, stiffness, heat and wear resistance than Ertalon 6 SA. It also has a better creep resistance but its impact strength and mechanical damping ability is red..
Maximum Service Temperature, Air	95.0 °C	203 °F	Continuous (GTP 50% Tensile); IEC 60216
PolyOne Bergamid™ B650 G/Mi20 UF Polyamide 6 (Nylon 6) Information provided by PolyOne
Maximum Service Temperature, Air	95.0 °C	203 °F	Continuous (GTP 50% Tensile); IEC 60216
PolyOne Bergamid™ B650 Mi10 Polyamide 6 (Nylon 6) Information provided by PolyOne
Maximum Service Temperature, Air	95.0 °C	203 °F
Abatron 440 A/B Filled Potting Compound  (discontinued **) Black or color dielectric hard casting adhesive room temperature epoxy. 100/20 ratio.Information provided by Abatron.
Maximum Service Temperature, Air	95.0 °C	203 °F
Abatron 810330 A/B Filled Potting Compound  (discontinued **) Filled casting, potting, and adhesive. Flexible arc track resistant. 100/18.5 ratio.Information provided by Abatron.
Maximum Service Temperature, Air	95.0 °C	203 °F	Continuous; FRISETTA Test Method
Nilit FRIANYL B63 SG 10 Nylon 6 for injection molding, 10% mineral filled Nylon 6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Maximum Service Temperature, Air	95.0 - 105 Â°C	203 - 221 Â°F	Softening Range
Huntsman Araldite GT 6084 Bisphenol A Epoxy Solid Resin Weight per Epoxide (EEW, g/eq) 875 to 1025. Max color is 1.Comments/Applications: Unmodified bis A "Type 4" epoxy. Specifically designed for esterification reactions to produce epoxy esters for hi..
Maximum Service Temperature, Air	95.0 - 105 Â°C	203 - 221 Â°F	Softening point
Mitsui MILEXâ„¢ RN-2830MB Acrylic Rubber Modified Phenolic Resin The MILEXâ„¢ Family of products is widely featured in brake systems of automobiles made by automakers through Mitsui Chemicals'. The phenolic material is primarily used as binders in brake pad..
Maximum Service Temperature, Air	95.0 °C	203 °F	5000 hours; 50% Tensile Strength; IEC 216; DIN 53446
Zell-Metall Engineering Plastics Zellamid 250 (PA6.6) Zellamid® 250 is noted for its high temperature resistance and high tensile strength. It is the hardest and most rigid type of extruded Nylon. Main characteristics are high resistance to fuels, oil..
Maximum Service Temperature, Air	95.0 °C	203 °F	Heat Distortion, Annealed; ASTM D648
Total PSI 740 Polystyrene Polystyrene 740 is an impact polystyrene designed for extrusion and injection molding. It is especially suitable for extrusion thermoforming applications requiring high glass and high stiffness, suc..
Maximum Service Temperature, Air	95.0 °C	203 °F
Zotefoams Plastazote® LD32CN Conductive Low Density Polyethylene Foam Plastazote® is a closed cell, cross-linked polyethylene foam manufactured using nitrogen expansion technology to produce foams with exceptional cell size uniformity, low odor / high purity and outs..
Maximum Service Temperature, Air	95.0 °C	203 °F
Zotefoams Plastazote® MP24 Metallocene Polyethylene Foam Plastazote® is a closed cell, cross-linked polyethylene foam manufactured using nitrogen expansion technology to produce foams with exceptional cell size uniformity, low odor / high purity and outs..
Maximum Service Temperature, Air	95.0 °C	203 °F	Wet Service
Chesterton ARC 897 Fine Grade Sliding Wear Compound Description: ARC 897 is an advanced ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is applied at a t..
Maximum Service Temperature, Air	95.0 °C	203 °F	Wet Service
Chesterton ARC BX1 Sliding Wear Compound Description: An advanced contractor grade ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is normally applied at..
Maximum Service Temperature, Air	95.0 °C	203 °F	Wet Service
Chesterton ARC BX2 Contractor Grade Fine Sliding Wear Compound Description: ARC BX2 is an advanced contractor grade ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It ..
Maximum Service Temperature, Air	95.0 °C	203 °F	Wet Service
Chesterton ARC I BX1 Impact & Wear Resistant Epoxy Composite Description: An advanced grade epoxy and urethane composite for the repair and protection of all metal surfaces subjected to severe abrasion and impact. It is normally applied at a thickness of 6 mm..
Maximum Service Temperature, Air	95.0 °C	203 °F	Post Cure, Wet Service
Chesterton MRS S4+ Metal Rebuilding System An advanced polymer composite formulated to protect equipment from extreme chemical attack and corrosion. It is typically applied by spray, roller or brush at a nominal thickness of 375 microns (15 ..
Maximum Service Temperature, Air	<= 95.0 °C	<= 203 °F	Laundering Resistance
EMS-Griltech Griltex® 2A Copolyamide Hotmelt Adhesive (Apparel Interlinings) Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo..
Maximum Service Temperature, Air	95.0 °C	203 °F	short term; EMS
EMS-Grivory Grivory® TR 55 LX PA12/MACMI Product description: Grilamid TR 55 LX natural is a high purity transparent thermoplastic polyamide, based on aliphatic and cycloaliphatic monomers. Grilamid TR 55 LX natural offers outstanding prop..
Maximum Service Temperature, Air	95.0 °C	203 °F	ASTM D 3575
Eurofoam Porocell POR 304 CM-OPC EPDM Foam Ethylene Propylene Diene Monomer Foam. Used for thermal insulation and soundproofing, antivibration and waterproofing; different types of gaskets.Information provided by Eurofoam s.r.l.
Maximum Service Temperature, Air	95.0 °C	203 °F	ASTM D 3575
Eurofoam Porocell POR 304 F-7142 EPDM Foam Ethylene Propylene Diene Monomer Foam. Used for thermal insulation and soundproofing, antivibration and waterproofing; different types of gaskets.Information provided by Eurofoam s.r.l.
Maximum Service Temperature, Air	95.0 °C	203 °F	Wet Service
Chesterton ARC MX2 High Wear Fine Particle Wear Compound Description: An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion and chemical attack. It is applied at a thickness of 3 mm (1/8”..
Maximum Service Temperature, Air	95.0 °C	203 °F	short term; EMS
EMS-Grivory Grivory® TR 90 LXS PAMACM12 Product description: Grilamid TR 90 LXS natural is a high purity transparent thermoplastic polyamide, based on aliphatic and cycloaliphatic monomers. Grilamid TR 90 LXS natural contains a processing..
Maximum Service Temperature, Air	95.0 °C	203 °F	Long Term
CENTROPLAST CENTROMID 12 Polyamide 12 This extruded material has good impact resistance, low moisture absorption and good chemical resistance. It is used in precision elements, drive parts, cases and housingsInformation provided by CEN..
Maximum Service Temperature, Air	95.0 °C	203 °F
Zotefoams Plastazote® LD15 Low Density Polyethylene Foam Plastazote® is a closed cell, cross-linked polyethylene foam manufactured using nitrogen expansion technology to produce foams with exceptional cell size uniformity, low odor / high purity and outs..
Maximum Service Temperature, Air	95.0 °C	203 °F	short term; EMS
EMS-Grivory Grivory® TR 55 LZ PA12/MACMI Product description: Grilamid TR grades are transparent thermoplastic polyamides based on aliphatic and cycloaliphatic blocks. Grilamid TR 55 LZ offers a variety of interesting properties such as: c..
Maximum Service Temperature, Air	95.0 °C	203 °F
LATI Lastil G/30 SAN, 30% Glass Fiber Reinforced Styrene-Acrylonitrile copolymer (SAN) based compound. Glass fibers. High dimensional stability. High stiffness.Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaI..
Maximum Service Temperature, Air	95.0 °C	203 °F	Long Term
CENTROPLAST CENTROMID 6.6 Polyamide 6.6 This material has good hardness, wear resistance, abrasion strength and impact strength. It is used for bearing cages, sliding bearings and articulated joint blocks.Information provided by CENTROPL..