- HOME
- POLYMER SEARCH
- Polymer Property : Maximum Service Temperature, Air = 300 °F
Polymer Property : Maximum Service Temperature, Air = 300 °F Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 149 °C | 300 °F | |
|
Ritelok PS65 General Purpose Pipe Sealant
Anaerobic. Pipe sealant for coarse threads. PS65 withstands temperatures from 65°F to 300°F (55°C-150°C), dismantled using normal tools
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | |
|
ND Industries StudGrade® 131 Permanent CT Threadlocker
General DescriptionHigh strength threadlockers for maximum security. Suitable for most applications where disassembly is not required.Typical Usesstuds and bolts, and threaded pipe fittings.Meets m..
|
|||
| Maximum Service Temperature, Air | 149 - 316 °C | 300 - 600 °F | |
|
Neutrex Purgex™ 3057 Plus Purging Compound
Blend, polyethylene, 3% glass, and FDA-approved active component. Non-toxic, non-abrasive and safe. Ready to use and easy to removePURGEX 3057 Plus thoroughly removes all types of colorants and engi..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | |
|
Permabond LM113 Anaerobic Threadlocker
Permabond® LM113 Threadlocker is a medium viscosity product for locking small threaded fasteners, such as screws and bolts or hydraulic fittings that might require disassembly. Due to its thixotrop..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | |
|
Permabond HH040 Pure NSF 61 Approved Anaerobic Retainer
Permabond® HH040 PURE is a single component liquid that cures only when in contact with metal parts and oxygen is excluded. The liquid adhesive fills the “air space” between parts and upon cure u..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | |
|
Permabond MM115P Pure Anaerobic Threadlocker
Permabond® MM115 PURE Threadlocker is an excellent general purpose threadlocker and sealant. It is used for locking metal bolts, nuts and screws that may require disassembly for service and mainten..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | |
|
Henkel Hysol EA 9203 Primer
Primer enhances adhesion on poorly prepared surfaces. Requires only room temperature drying prior to bond. Use with room-temperature-curing paste adhesives.Applications: Sprayable Metal and Honeyco..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | |
|
Master Bond EP62-1 High Glass Transition Temperature Epoxy System
Master Bond EP62-1 is a two component epoxy system that has an exceptionally long working life at ambient temperatures and cures rapidly at moderately elevated temperatures. The cured epoxy resin ex..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | |
|
Loctite® 3108 Acrylic Light Cure Adhesive
Acrylic Light Cure AdhesivesVersatile Loctite® ultraviolet (UV) and visible light curing adhesives can be used in bonding, encapsulating, coating, tacking, and sealing applications. These single co..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | |
|
Loctite® 349 Acrylic Light Cure Adhesive
Acrylic Light Cure AdhesivesVersatile Loctite® ultraviolet (UV) and visible light curing adhesives can be used in bonding, encapsulating, coating, tacking, and sealing applications. These single co..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | |
|
Master Bond UV15X-6MED-2 UV Curable Compound for Medical Applications
Description: Master Bond Polymer System UV15X-6MED-2 is a newly developed one component clear, non-yellowing, UV curable urethane elastomer system possessing high flexibility and outstanding abrasio..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | |
|
Hexcel® HexWeb® HRH-10/F35 - 3.5 Nonmetallic Flex-Core Honeycomb
Designation: Material/Cell Size (cells per lineal foot in W direction)-DensityHexcel manufactures two types of nonmetallic reinforced plastic HexWeb Flex-Core: HexWeb HRP - Fiberglasses cloth reinfo..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | |
|
Loctite® 635 High Strength/Slow Cure Retaining Compound
RetainersLoctite Corporation, the pioneer of anaerobic adhesives, has applied this technology to create retaining compounds that increase the shear strength of cylindrical, non-threaded assemblies. ..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | |
|
DuPont Teijin Films Mylar® A Polyester Film, 200 Gauge
Mylar® A films are tough, general purpose films that are transparent in 48 through 92 gauge and translucent in heavier gauges. They have a rough surface to provide ease of handling, good adhesion, ..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | |
|
ChevronTexaco Black Pearl® NLGI 1 Grease EP
FeaturesChevron Black Pearl Greases EP are multipurpose, extreme pressure, water-resistant greases.They are formulated with ISOSYN® base stock, a polyurea thickener, and rust and oxidation inhibito..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | intermittent |
|
Ensinger DELRIN® 570 Acetal, 20% Glass Filled (POM)
DELRIN®570 Shapes manufactured by Ensinger are 20% glass filled materials intended for general industrial use. The material offers very high stiffness, low warpage, and low creep for superior part ..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | |
|
DuPont Teijin Films Mylar® A Polyester Film, 400 Gauge
Mylar® A films are tough, general purpose films that are transparent in 48 through 92 gauge and translucent in heavier gauges. They have a rough surface to provide ease of handling, good adhesion, ..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | Long term |
|
3M 9499 Splicing Tape
3M™ Splicing Tapes utilize an acrylic pressure sensitive adhesive system that offers a balance of initial adhesion and good holding power.Information provided by 3M
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | Short term |
|
3M 9738R Double Coated Splicing Tape
3M™ Double Coated Tape 9737 is a Clear 3.5 mil acrylic double coated tape on a polyester film carrierFeatures:High tack, acrylic adhesive offers good low and elevated temperature resistance.Adheres..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | Short term |
|
3M 4411G Extreme Sealing Tape
3M™ Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications. The backing on this tape is an ionomer film that is very tough ..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | Service |
|
3M 7905 Screen Printable Sheet Polyester Label Material
3M™ Screen Printable Sheet Polyester Label Materials are durable, high performance materials that offer excellent thermal stability, moisture resistance and chemical resistance. These materials uti..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | Service |
|
3M 7908FL Screen Printable Sheet Polyester Label Material
3M™ Screen Printable Sheet Polyester Label Materials are durable, high performance materials that offer excellent thermal stability, moisture resistance and chemical resistance. These materials uti..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | Short term |
|
3M 9475LEB High Strength Double Coated Tape with Adhesive 300LSE
3M™ Double Coated Tapes with 3M™ Adhesive 300LSE provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene and powder coated paints. The acryli..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | Short term |
|
3M 9496LE High Strength Double Coated Tape with Adhesives 300LSE and 200MP
3M™ Double Coated Tape 9496LE with 3M™ Low Surface Energy Acrylic Adhesive 300LSE provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene and..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | Long term |
|
3M F-9752PC Adhesive Transfer Tapes with 420 Adhesive
2.0 mil, 420 high tack acrylic adhesive with 4.2 mil, 58 lb polycoated kraft paper liner.Features:2.0 mil adhesive transfer tape. 58 lb polycoated kraft paper liner. 420 Acrylic AdhesiveHigh tack ad..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | for up to 30 mins |
|
3M Scotch® 4737T High Temperature Fine Line Tape
Scotch® High Temperature Fine Line Tape 4737 is a vinyl paint masking tape for fascia, rocker panels, two-tone and other multiple color applications where critical paint break lines are required.In..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | |
|
Loctite® 511 Fast Curing Thread Sealant
Thread SealersLoctite® Liquid Thread Sealants seal and secure metal pipes and fittings, filling the space between threaded metal parts, and hardening to prevent leakage. Designed for low and high p..
|
|||
| Maximum Service Temperature, Air | 149 °C | 300 °F | for 50% loss of tensile strength after 20000hr |
|
BASF Ultramid® B3UGM210 GR 22866 10/50% Glass/Mineral Filled PA6 FR (Dry)
Description: Halogen- and phosphorus-free injection-molding grade with very high rigidity, low smoke density and outstanding electrical properties.Information provided by BASF
|
|||
Copyright © lookpolymers.com All Rights Reserved