Polymer Property : Maximum Service Temperature, Air = 347 °F Product List

Thermal Properties

Tips: 30 items are displayed at most.

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	175 °C	347 °F	Recommended
Nye Lubricants 231(SO) Synthetic Oil Information provided by Nye Lubricants.
Maximum Service Temperature, Air	175 °C	347 °F	Recommended
Nye Lubricants 374A (RL) Synthetic Oil Information provided by Nye Lubricants.
Maximum Service Temperature, Air	175 °C	347 °F	Recommended
Nye Lubricants 500 (RT) Synthetic Oil Information provided by Nye Lubricants.
Maximum Service Temperature, Air	175 °C	347 °F	Recommended
Nye Lubricants 797 (NC346) (RL) Synthetic Oil Information provided by Nye Lubricants.
Maximum Service Temperature, Air	175 °C	347 °F	Recommended
Nye Lubricants 797G (RL) Synthetic Oil Information provided by Nye Lubricants.
Maximum Service Temperature, Air	175 °C	347 °F
NextGen Adhesives P907-01 Fiber Optic Adhesive Description: NGAC P907-01 is a rapid curing, low viscosity, heat cured epoxy adhesive system that is specifically formulated for use in the fiber optic industry.Advantages and Applications: Uses inc..
Maximum Service Temperature, Air	175 °C	347 °F
NextGen Adhesives P907-04 Fiber Optic Adhesive Description: NGAC P907-04 is a low viscosity and room temperature curing adhesive specifically formulated for fiber optic terminations.Advantages and Applications: Uses include the termination of si..
Maximum Service Temperature, Air	175 °C	347 °F
Parker Chomerics CHO-THERM® 1646 Non-Insulating Interface Material Description: CHO-THERM® 1646 pads offer the best available thermal performance, without the use of grease, in applications where electrical isolation is not required. The low thermal impedance of C..
Maximum Service Temperature, Air	175 °C	347 °F	Short Time; IEC 60216
PolyOne Bergamid™ B70 red RAL3001 Polyamide 6 (Nylon 6) Information provided by PolyOne
Maximum Service Temperature, Air	175 °C	347 °F
NextGen Adhesives G907-08 Epoxy Adhesive Description: NGAC G907-08 is a low viscosity, electrically insulating, heat cured and 2-part adhesive systems designed for applications where temperature and chemical resistance is critical. The NGA..
Maximum Service Temperature, Air	175 °C	347 °F
Tra-Con Tra-Bond 2230 Color Keyed, High Temperature Epoxy Adhesive TRA-BOND 2230 is a clear, low viscosity, high temperature, two-part epoxy adhesive that changes colors during the curing process to indicate cure status. The unmixed components are light yellow; the..
Maximum Service Temperature, Air	175 °C	347 °F
Tra-Con Tra-Bond F123LV Color Keyed High Temperature Epoxy Adhesive TRA-BOND F123LV is a fast cure, low viscosity, two-component epoxy formulation that signals both proper mixing and curing when bonding fiber optic bundles, potting glass fibers, and/or terminating s..
Maximum Service Temperature, Air	175 °C	347 °F
Tra-Con Tra-Bond FS443 Color Keyed Thixotropic Epoxy Adhesive TRA-BOND FS443 is a fast cure, high viscosity, two-component epoxy formulation that signals both proper mixing and curing when bonding fiber optic bundles, potting glass fibers, and/or terminating s..
Maximum Service Temperature, Air	175 °C	347 °F
Tra-Con Tra-Duct 2958 Snap Cure Conductive Silver Epoxy Adhesive TRA-DUCT 2958 is a two-part, smooth paste of specially refined and processed epoxy and silver components, recommended for electronic, microelectronic and die-attach bonding and sealing applications ..
Maximum Service Temperature, Air	175 °C	347 °F
Tra-Con Tra-Bond 2202 Low Viscosity/High Temperature Epoxy Adhesive TRA-BOND 2202 is a low viscosity, high temperature cure epoxy resin system developed for rigid laminating, filament winding, potting and bonding applications where a clear, almost transparent adhesi..
Maximum Service Temperature, Air	175 °C	347 °F	Dry
Chesterton MRS S2 Metal Rebuilding System An advanced ceramic composite for the resurfacing and protection of all metal surfaces. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrinking, 100% solids. MRS S2 is..
Maximum Service Temperature, Air	175 °C	347 °F	Short Cycle
DuPont™ Tedlar® TUT10BG3 UV Screening Transparent Polyvinyl Fluoride Film Properties of DuPont™ Tedlar® polyvinyl fluoride (PVF) biaxially oriented film include excellent resistance to weathering, outstanding mechanical properties, and inertness towards a wide variety o..
Maximum Service Temperature, Air	175 °C	347 °F	Continuous
Epoxy Technology EPO-TEK® 337H Graphite-Filled, High Temperature Epoxy Product Description: EPO-TEK® 377H is a two component, high Tg, graphite filled epoxy designed for ESD/EMI shielding of semiconductor devices and electronics. It can be used in many electronic ind..
Maximum Service Temperature, Air	175 °C	347 °F
ATG s.r.l. EACM Ethylene-Acrylic Rubber
Maximum Service Temperature, Air	175 °C	347 °F
Atom Adhesives AA-DUCT N02 Epoxy Adhesive AA-DUCT N02 is a single component, heat curing, conductive epoxy polymer that was designed for ease in handling. This high performance conductive polymer cures quickly at elevated temperatures makin..
Maximum Service Temperature, Air	175 °C	347 °F	for 50% loss of tensile strength after 5000hr
BASF Ultramid® A3WG6 BK 00564 30% Glass Filled PA66 (Conditioned) Description: 30% glass-fiber reinforced and heat aging resistant injection-molding grade for machine elements and housings of high stiffness and dimensional stability such as lamp socket housings, f..
Maximum Service Temperature, Air	175 °C	347 °F	Continuous service
Dow Advanta® 3650 Specialty Elastomer  (discontinued **) Advanta® specialty elastomers provides good fluid resistance and better high temperature performance than nitrile or HNBR and lower cost than fluoroelastomers. Available in two grades. ASTM D2000..
Maximum Service Temperature, Air	175 °C	347 °F	for 50% loss of tensile strength after 5000hr
BASF Ultramid® B3WG5 BK 00564 25% Glass Filled PA6 (Conditioned) Description: 25% glass-fiber reinforced and heat aging resistant injection-molding grade, for instance, for fan impeller glass-fiber reinforced injection-molding grade for industrial articles and el..
Maximum Service Temperature, Air	175 °C	347 °F	for 50% loss of tensile strength after 5000hr
BASF Ultramid® B3WG5 BK 00654 PA6 25% Glass Filled BK (Dry) Description: 25% glass-fiber reinforced and heat aging resistant injection-molding grade, for instance, for fan impeller glass-fiber reinforced injection-molding grade for industrial articles and el..
Maximum Service Temperature, Air	175 °C	347 °F	for 50% loss of tensile strength after 5,000 hr
BASF Ultramid® B3WG6 30% Glass Filled PA6 (Conditioned) Ultramid B3WG6 is a 30% glass fiber reinforced, heat stabilized injection molding PA6 grade.
Maximum Service Temperature, Air	175 °C	347 °F	for 50% loss of tensile strength after 5,000 hr
BASF Ultramid® B3WG6 30% Glass Filled PA6 (Dry) Ultramid B3WG6 is a 30% glass fiber reinforced, heat stabilized injection molding PA6 grade.
Maximum Service Temperature, Air	175 °C	347 °F	for 50% loss of tensile strength after 5,000 hr
BASF Ultramid® B3WG6 BK00564 30% Glass Filled PA6 (Dry) Ultramid B3WG6 BK00564 is a 30% glass fiber reinforced, pigmented black, heat stabilized injection molding PA6 grade.