- HOME
- POLYMER SEARCH
- Polymer Property : Maximum Service Temperature, Air = 350 °F
Polymer Property : Maximum Service Temperature, Air = 350 °F Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Reltek BONDiT™ B-4682 Adhesive, Sealant & Coating System Key Properties: Excellent adhesion to low surface energy plastics without primer or surface preparation.Applications: High flexibility, 300% elongation, emphasizing high tack for un-abraded substrat.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Permabond LM012 Anaerobic Threadsealant Permabond® LM012 is an unfilled, medium viscosity anaerobic adhesive. Its major benefit as related to other pipe sealants is that it is an unfilled resin that is compatible with hydraulic fluids. I.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Alcoa KAMA 5100 CPET
(discontinued **) CapabilitiesGauge: .020" to .040" (508 to 106µm)Width: 20" to 52" (508 to 1321mm)Core size: 3" or 6"Roll O.D.: 29" standard, available up to 40"Silicone coating availableAvailable in natural blackP.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Dielectric Polymers NT-2802 Ultra Tack Tape
(discontinued **) Crosslinked silicone adhesive with polyester film backing.Features: Chemical resistantTemperature resistantGood conformabilityApplications: Splicing of silicone coated paper and film at zero wet out.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Dielectric Polymers NT-5521-2 Photo Processing Tape
(discontinued **) Crosslinked silicone adhesive with polyester film backing.Features: Chemical resistantTemperature resistantGood conformabilityApplications: Splicing photographic film to leader card during film proc.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | Continuous |
| Dielectric Polymers NT-200APS High Temperature Laminating Adhesive
(discontinued **) Acrylic adhesive with moisture stable PE coated kraft (60#) liner.Features: Plasticizer migration resistantHigh temperature shear propertiesNeutral pHSolvent resistantApplications: Interior automoti.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Dielectric Polymers NT-8512-2 Powder Coating Tape
(discontinued **) Crosslinked silicone adhesive with polyester film backing.Features: Fine line definitionClean tape removalGood conformabilityNo film shrinkage after exposure to elevated temperaturesAbrasion resista.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Ethylene Propylene Rubber (EPM, EPDM) Satisfactory compatibility with fireproof hydraulic fluids, ketones, hot and cold water, alkalis, and ozone/strong oxidizing chemicals. Unsatisfactory compatibility with most oils, gasoline, kerosen.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | dry |
| ITW Devcon Metal Repair Ceramic Repair Putty, Dark Blue Information provided by ITW Devcon |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | In oxygen |
| SGL Carbon Group EK 2203 Carbon Graphite Good mechanical strength, good sliding properties, high temperature resistance, high thermal shock resistance, low wettability, high corrosion resistance, high thermal conductivity, high purity, and.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Saint-Gobain CHR® 2829-3(R) Acrylic Adhesive Zone Tape Specification Notes: 21CFR177.1550 compliant. All data based on a 0.003 inch test sample. Information provided by Saint Gobain Performance Products. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Saint-Gobain CHR® K102 Polyimide Film Backing Acrylic Adhesive Pressure Sensitive Tape Description: Polyimide films are employed because of their extreme heat resistance. Service temperatures range from -100°F to 500°F (-73°C to 260°C). These flame retardant films exhibit .. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Saint-Gobain CHR® M758 Polyester Film Backing Silicone Adhesive Pressure Sensitive Tape Description: Polyester films have excellent dimensional stability, high tensile, tear, and impact strengths, and ultimate elongation up to 120% of its original dimensions. These films exhibit low wa.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Saint-Gobain CHR® M827 Polyester Film Backing Silicone Adhesive Pressure Sensitive Tape Description: Polyester films have excellent dimensional stability, high tensile, tear, and impact strengths, and ultimate elongation up to 120% of its original dimensions. These films exhibit low wa.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Saint-Gobain CHR® RU101 Rulon Film Backing Acrylic Adhesive Pressure Sensitive Tape Description: Rulon® films offer superior abrasion resistance when compared to conventional PTFE films. Service temperatures range from -100°F to 500°F (-73°C to +260°C). In rotating b.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Saint-Gobain CHR® SG13-06(R) High Performance Glass-PTFE Backing Acrylic Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Saint-Gobain CHR® M52 Polyester Film Backing Silicone Adhesive Pressure Sensitive Tape Description: Polyester films have excellent dimensional stability, high tensile, tear, and impact strengths, and ultimate elongation up to 120% of its original dimensions. These films exhibit low wa.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Master Bond Supreme 3HT High Bond Strength One Component Epoxy Adhesive System Master Bond Polymer System Supreme3HT is a storage stable one component, heat curing epoxy adhesive featuring a hither to unattainable balance of performance properties including both high shear and.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Master Bond Supreme 3HTND-2GT Toughened, Fast Curing, One Part Glob Top Adhesive Master Bond Polymer System Supreme 3HTND-2GT is a fast curing, toughened one component high performance epoxy adhesive/sealant which meets the growing need for precise positioning and bonding of mic.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | intermittent |
| Thermoseal ML-5270 PTG Gasketing Thermoseal ML-5270 is a high performance synthetic fiber and polychloroprene binder gasket material that is resistant to refrigerants and oil mixtures. Its unique Multi-Layer Technology structure pr.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | High strength retained |
| Hexcel® HexWeb® HRP - 1/4 - 3.5 Fiberglass/Phenolic Honeycomb Designation: Material-Cell Size (inches)-DensityHexWeb HRP is a glass fabric reinforced honeycomb in which a heat-resistant phenolic resin is used both for initial and final impregnations. This prod.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | High strength retained |
| Hexcel® HexWeb® HRP - 3/8 - 3.2 Fiberglass/Phenolic Honeycomb Designation: Material-Cell Size (inches)-DensityHexWeb HRP is a glass fabric reinforced honeycomb in which a heat-resistant phenolic resin is used both for initial and final impregnations. This prod.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Hexcel® HexWeb® HRP/F50 - 3.5 Nonmetallic Flex-Core Honeycomb Designation: Material/Cell Size (cells per lineal foot in W direction)-DensityHexcel manufactures two types of nonmetallic reinforced plastic HexWeb Flex-Core: HexWeb HRP - Fiberglasses cloth reinfo.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | High strength retained |
| Hexcel® HexWeb® HRP/OX - 1/4 - 4.5 Fiberglass/Phenolic Honeycomb Designation: Material-Cell Size (inches)-DensityHexWeb HRP is a glass fabric reinforced honeycomb in which a heat-resistant phenolic resin is used both for initial and final impregnations. This prod.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | High strength retained |
| Hexcel® HexWeb® HRP/OX - 1/4 - 7.0 Fiberglass/Phenolic Honeycomb Designation: Material-Cell Size (inches)-DensityHexWeb HRP is a glass fabric reinforced honeycomb in which a heat-resistant phenolic resin is used both for initial and final impregnations. This prod.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Master Bond UV15TK High Temperature Resistant One Component UV Curable System Master Bond UV15TK is a moderate viscosity, epoxy based UV curable system for bonding, sealing and coating. It is 100% reactive and does not contain any solvents or other volatiles. It is also compl.. |
|||
| Maximum Service Temperature, Air | 177 - 232 °C | 350 - 450 °F | Cellulosics, Polyolefins, Styrenics & PVC Resins |
| Claude Bamberger Bamberko® 9016 Purge Compound Bamberko® is recommended for cellulosics, polyolefins, styrenics, and PVC resins. Temperature range 350-525°F (176-275°C). Formulated to flow through injection cylinders and extrusion barrels w.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Loctite® 5083 Silicone Light Cure Adhesive Silicon Light Cure AdhesivesLoctite® 5083 Silicone Light Cure Adhesive Key Substrates: Glass, Metal, Ceramic Cure Type: Ultraviolet, Moisture, Methoxy Bonding Type: Silicon |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | Intermittent |
| Ensinger Tecast Vekton™ 6XAU High Heat Cast Nylon 6 (PA6) VEKTON® 6XAU is a high heat weather resistant cast nylon 6 with superior fatigue-resistant and bearing properties.General Vekton® Cast Nylon Information: VEKTON cast nylon, available in a variety .. |
|||
Copyright © lookpolymers.com All Rights Reserved