Polymer Property : Cure Time = 360 min Product List

Processing Properties

Tips: 30 items are displayed at most.

Processing Properties	Metric	English	Comments
Cure Time	360 - 480 min <br>@Temperature 25.0 °C	6.00 - 8.00 hour <br>@Temperature 77.0 °F	De-mold Time
Northstar Polymers MPP-A47A Liquid Castable Polyurethane MPP-A47A is a room-temperature-cure liquid castable polyurethane system. This ether-base polyurethane system is used in applications such as mold-making, prototyping, production of cast parts, pott..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Stainless steel, handling strength
Permabond F202 Anaerobic Retainer The unique 'toughening' process incorporated into Permabond® F202 gives this anaerobic adhesive excellent resistance to peel and impact forces. Primarily designed for use on metal surfaces, it is a..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Stainless steel, handling strength
Permabond HH120 Anaerobic Threadlocker Permabond® HH120 Threadlocker is an excellent general purpose threadlocker and sealant. It is used for locking bolts, nuts and screws that require permanent assembly. Its high viscosity allows for ..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Stainless steel, handling strength
Permabond HL126 Anaerobic Threadlocker PERMABOND® HL126 Threadlocker is a water thin product for locking pre-assembled parts through wicking action. PERMABOND® HL126 Threadlocker prevents vibration loosening. Because of the low viscosi..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Stainless steel, handling strength
Permabond HM160 Anaerobic Retaining Compound Permabond® HM160 is a medium viscosity liquid adhesive that cures when confined between metal parts to form a tough, hard plastic. In the uncured, liquid state, the adhesive wets the metal surfaces..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Stainless steel, handling strength
Permabond HM165 Anaerobic Retainer Permabond® HM165 is a high viscosity anaerobic retaining compound that cures when confined between metal parts to form a tough bond. It is best suited for cylindrical parts and where high temperatu..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Zinc, working strength
Permabond LH150 Anaerobic Threadsealant Permabond® LH150 Pipe Sealant with PTFE is designed for sealing and locking tapered metal pipe threads and fittings. It is ideal for stainless steel and other passive metals. Instant sealing of up ..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	M10 steel, working strength
Permabond LM113 Anaerobic Threadlocker Permabond® LM113 Threadlocker is a medium viscosity product for locking small threaded fasteners, such as screws and bolts or hydraulic fittings that might require disassembly. Due to its thixotrop..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Stainless steel, handling strength
Permabond F201 Anaerobic Retainer Permabond® F201 is an anaerobic adhesive which has been developed to give excellent resistance to peel and impact forces. This toughening, combined with good adhesion to aluminum and copper alloys,..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Stainless steel, handling strength
Permabond HH040 Anaerobic Retainer Permabond® HH040 is a single component liquid that cures only when in contact with metal parts and oxygen is excluded. The liquid adhesive fills the “air space” between parts and upon cure unitiz..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	M10 steel, full strength
Permabond MM115 Anaerobic Threadlocker Permabond® MM115 Threadlocker is an excellent general purpose threadlocker and sealant. It is used for locking metal bolts, nuts and screws that may require disassembly for service and maintenance...
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Zinc, full strength
Permabond MM115P Pure Anaerobic Threadlocker Permabond® MM115 PURE Threadlocker is an excellent general purpose threadlocker and sealant. It is used for locking metal bolts, nuts and screws that may require disassembly for service and mainten..
Cure Time	360 min <br>@Thickness 2.00 mm	6.00 hour <br>@Thickness 0.0787 in	room temp
Loctite® 5920™ RTV Silicone Sealant LOCTITE® 5920™ is a moisture-curing, non-corrosive silicone. The thixotropic nature of LOCTITE® 5920™ reduces the migration of liquid product after application to the substrate. It has been desi..
Cure Time	360 min <br>@Temperature 32.0 °C	6.00 hour <br>@Temperature 89.6 °F	Light Load
Chesterton ARC 855 Abrasion Control Liquid Description: An advanced ceramic composite formulated to protect equipment from aggressive chemical attack, corrosion, and erosion. The product is a low viscosity composite that is easily applied by..
Cure Time	360 min <br>@Temperature 32.0 °C	6.00 hour <br>@Temperature 89.6 °F	Light Load
Chesterton ARC 890 Course Grade Sliding Wear Compound An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is normally applied at the thickness of 6 mm (1/4”)..
Cure Time	360 min <br>@Temperature 32.0 °C	6.00 hour <br>@Temperature 89.6 °F	Light Load
Chesterton ARC 897 Fine Grade Sliding Wear Compound Description: ARC 897 is an advanced ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is applied at a t..
Cure Time	360 min <br>@Temperature 16.0 °C	6.00 hour <br>@Temperature 60.8 °F	Overcoat Begin
Chesterton ARC S7 High Temperature & Chemical Resistant Novolac Vinyl Ester Coating Description: ARC S7 is a low VOC, epoxy novolac vinyl ester based coating intended for high temperature exposures in chemically aggressive applications where the risk for thermal cycling may be pres..
Cure Time	360 min <br>@Temperature 10.0 °C	6.00 hour <br>@Temperature 50.0 °F	Tack Free
Chesterton ARC SD4i High temperature ceramic reinforced erosion resistant coating Description: An advanced ceramic composite for resurfacing and protection of metal surfaces in immersion service. It is normally applied in a thickness range of 250-370 microns (10-15 mils) per coat..
Cure Time	360 min <br>@Temperature 60.0 °C	6.00 hour <br>@Temperature 140 °F
Cytec EN-2523 (Conap) Potting and Encapsulation Adhesive Polyurethane Potting and Encapsulating SystemsConathane® EN-2500 series polyurethane potting and encapsulating systems from Cytek have varying degrees of worklife, viscosity and hardness for many s..
Cure Time	360 min <br>@Temperature 60.0 °C	6.00 hour <br>@Temperature 140 °F
Cytec EN-2527 (Conap) Potting and Encapsulation Adhesive Polyurethane Potting and Encapsulating SystemsConathane® EN-2500 series polyurethane potting and encapsulating systems from Cytek have varying degrees of worklife, viscosity and hardness for many s..
Cure Time	360 min <br>@Temperature 60.0 °C	6.00 hour <br>@Temperature 140 °F
Cytec EN-2541 (Conap) Potting and Encapsulation Adhesive Polyurethane Potting and Encapsulating SystemsConathane® EN-2500 series polyurethane potting and encapsulating systems from Cytek have varying degrees of worklife, viscosity and hardness for many s..
Cure Time	360 min <br>@Temperature 25.0 °C	6.00 hour <br>@Temperature 77.0 °F	Tack Free
Chesterton ARC HT-S High Temperature Corrosion Resistant Coating Description: ARC HT-S is a high temperature corrosion resistant coating for continuous operating conditions at elevated temperatures. It is easily applied by brush or roller and can be sprayed with ..
Cure Time	360 min <br>@Temperature 32.0 °C	6.00 hour <br>@Temperature 89.6 °F	Light Load
Chesterton ARC MX2 High Wear Fine Particle Wear Compound Description: An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion and chemical attack. It is applied at a thickness of 3 mm (1/8”..
Cure Time	360 min <br>@Temperature 107 °C	6.00 hour <br>@Temperature 225 °F
Aremco Pyro-Putty™ 950 High Temperature Ceramic-Metallic Putty, Ceramic Fiber Filled Ceramic Fiber-Filled, Organic Caulk.For Sealing High Temperature Joints to 950°F.Cures Into a Tough, Pliable, Inert Material.
Cure Time	360 min <br>@Temperature 25.0 °C	6.00 hour <br>@Temperature 77.0 °F
Tra-Con Tra-Bond 224-8 Room Temperature Cure Epoxy Adhesive TRA-BOND 224-8 room temperature cure epoxy adhesive is a thermally conductive version of 224-1. This adhesive develops structural strength rapidly. When cured at room temperature, this adhesive prov..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Stainless steel, handling strength
Permabond A011 Anaerobic Threadlocker Permabond® A011 is an anaerobic adhesive designed for locking and sealing threaded or coaxially fitting metal parts where subsequent dismantling is required. Its controlled strength ensures fatigue..
Cure Time	360 min <br>@Temperature 32.0 °C	6.00 hour <br>@Temperature 89.6 °F	Foot Traffic
Chesterton ARC CS2 Low-viscosity, Composite concrete primer sealer Description: An advanced composite formulated to protect concrete surfaces from mild chemical attack. It is normally applied at a thickness of 250-375 microns (10-15 mils) per coat. Non-shrinking. 1..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Stainless steel, handling strength
Permabond A126 Anaerobic Retainer Permabond® A126 is a high-strength anaerobic adhesive for permanent assembly of coaxial assemblies or threaded metal components. The exceptionally low viscosity of this product makes it ideal for u..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Stainless steel, handling strength
Permabond A131 Anaerobic Threadsealant Permabond® A131 is an anaerobic adhesive designed to seal threaded metal pipe connections carrying a wide variety of gases and liquids, including potable water. Suitable for use on both parallel an..