Polymer Property : Cure Time = 6.00 hour Product List

Processing Properties

Tips: 30 items are displayed at most.

Processing Properties	Metric	English	Comments
Cure Time	360 - 480 min <br>@Temperature 25.0 °C	6.00 - 8.00 hour <br>@Temperature 77.0 °F	De-mold Time
Northstar Polymers MPP-A47A Liquid Castable Polyurethane MPP-A47A is a room-temperature-cure liquid castable polyurethane system. This ether-base polyurethane system is used in applications such as mold-making, prototyping, production of cast parts, pott..
Cure Time	360 - 1440 min <br>@Temperature 23.0 °C	6.00 - 24.0 hour <br>@Temperature 73.4 °F	Zinc, working strength
Permabond F202 Anaerobic Retainer The unique 'toughening' process incorporated into Permabond® F202 gives this anaerobic adhesive excellent resistance to peel and impact forces. Primarily designed for use on metal surfaces, it is a..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Stainless steel, handling strength
Permabond HH120 Anaerobic Threadlocker Permabond® HH120 Threadlocker is an excellent general purpose threadlocker and sealant. It is used for locking bolts, nuts and screws that require permanent assembly. Its high viscosity allows for ..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Zinc, working strength
Permabond HH167 Anaerobic Retainer Permabond® HH167 is a high viscosity gap filling silver paste, which can be used for repairing metal machinery parts. It is ideal for repairing worn shafts, broken threads, damaged keyways and spli..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Stainless steel, handling strength
Permabond HM128 Anaerobic Threadlocker Permabond® HM128 Threadlocker is a high strength adhesive for permanent assembly. It is typically used for preventing vibration loosening of bolts, studs and cap screws. Full cure to a cross-linked..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	M10 steel, working strength
Permabond LH050P Pure Anaerobic Threadsealant PERMABOND® LH050 PURE anaerobic pipe sealant is single component paste that cures only when in contact with metal parts and oxygen is excluded. The sealant fills up the entire space between male an..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Stainless steel, handling strength
Permabond HH040 Anaerobic Retainer Permabond® HH040 is a single component liquid that cures only when in contact with metal parts and oxygen is excluded. The liquid adhesive fills the “air space” between parts and upon cure unitiz..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	M10 steel, full strength
Permabond MM115 Anaerobic Threadlocker Permabond® MM115 Threadlocker is an excellent general purpose threadlocker and sealant. It is used for locking metal bolts, nuts and screws that may require disassembly for service and maintenance...
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	M10 steel, full strength
Permabond MM115P Pure Anaerobic Threadlocker Permabond® MM115 PURE Threadlocker is an excellent general purpose threadlocker and sealant. It is used for locking metal bolts, nuts and screws that may require disassembly for service and mainten..
Cure Time	360 - 480 min <br>@Temperature 23.9 °C	6.00 - 8.00 hour <br>@Temperature 75.0 °F	for 48 hrs, plus 140-150°F
Master Bond Super Gel 9AOND Dimensionally Stable Urethane Modified Epoxy Master Bond Super Gel 9AOND is a two component, urethane modified epoxy system that cures at room temperature and has a paste-like consistency. It offers softness and retains dimensional stability. ..
Cure Time	360 min <br>@Temperature 93.3 °C	6.00 hour <br>@Temperature 200 °F
Zyvex Performance Materials Arovex™ 250 Carbon Nanotube Strengthened Prepreg Arovex® 250 Prepreg is a 180°F (82°C) to 280°F (138°C) curing carbon nanotube strengthened epoxy prepreg suitable for numerous composites applications. Normal curing takes place at 250°F (121°..
Cure Time	360 min <br>@Thickness 2.00 mm	6.00 hour <br>@Thickness 0.0787 in	room temp
Loctite® 5920™ RTV Silicone Sealant LOCTITE® 5920™ is a moisture-curing, non-corrosive silicone. The thixotropic nature of LOCTITE® 5920™ reduces the migration of liquid product after application to the substrate. It has been desi..
Cure Time	360 min <br>@Temperature 32.0 °C	6.00 hour <br>@Temperature 89.6 °F	Light Load
Chesterton ARC 897 Fine Grade Sliding Wear Compound Description: ARC 897 is an advanced ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is applied at a t..
Cure Time	360 min <br>@Temperature 32.0 °C	6.00 hour <br>@Temperature 89.6 °F	Light Load/Overcoat End
Chesterton ARC 982 100% Novolac acid resistant coating Description: An advanced polymer composite formulated to protect equipment from extreme chemical attack and corrosion. A low viscosity composite that is applied by brush, squeegee, or a plural compo..
Cure Time	360 min <br>@Temperature 32.0 °C	6.00 hour <br>@Temperature 89.6 °F	Light Load
Chesterton ARC BX1 Sliding Wear Compound Description: An advanced contractor grade ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is normally applied at..
Cure Time	360 min <br>@Temperature 32.0 °C	6.00 hour <br>@Temperature 89.6 °F	Light Load
Chesterton ARC HT-T Spark Testable High Temperature Trowelable Abrasion Control Compound An advanced ceramic composite formulated to protect equipment from corrosion and erosion in elevated temperature water solution immersion. This system is a high viscosity composite that is applied b..
Cure Time	360 min <br>@Temperature 16.0 °C	6.00 hour <br>@Temperature 60.8 °F	Overcoat Begin
Chesterton ARC S7 High Temperature & Chemical Resistant Novolac Vinyl Ester Coating Description: ARC S7 is a low VOC, epoxy novolac vinyl ester based coating intended for high temperature exposures in chemically aggressive applications where the risk for thermal cycling may be pres..
Cure Time	360 min <br>@Temperature 60.0 °C	6.00 hour <br>@Temperature 140 °F
Cytec EN-2541 (Conap) Potting and Encapsulation Adhesive Polyurethane Potting and Encapsulating SystemsConathane® EN-2500 series polyurethane potting and encapsulating systems from Cytek have varying degrees of worklife, viscosity and hardness for many s..
Cure Time	360 min <br>@Temperature 60.0 °C	6.00 hour <br>@Temperature 140 °F
Cytec EN-2543 (Conap) Potting and Encapsulation Adhesive Polyurethane Potting and Encapsulating SystemsConathane® EN-2500 series polyurethane potting and encapsulating systems from Cytek have varying degrees of worklife, viscosity and hardness for many s..
Cure Time	360 min <br>@Temperature 60.0 °C	6.00 hour <br>@Temperature 140 °F	Minimum Bond Line
Epoxy Technology EPO-TEK® E4110 Electrically Conductive, Silver Epoxy Product Description: EPO-TEK® E4110 is an electrically conductive, silver-filled epoxy paste. This two component system is designed for low temperature curing from ambient to 80°C, although other..
Cure Time	360 min <br>@Temperature 45.0 °C	6.00 hour <br>@Temperature 113 °F	Minimum Bond Line
Epoxy Technology EPO-TEK® E4110-PFC Electrically Conductive Epoxy Product Description: EPO-TEK®E4110-PFC is a two-component, silver filled, electrically conductive adhesive designed for semiconductor IC packaging and general electronic assembly. It is a thixotr..
Cure Time	360 - 480 min <br>@Temperature 24.0 °C	6.00 - 8.00 hour <br>@Temperature 75.2 °F	demold time
BCC Products BC 8160 Urethane Casting BC8160 is a low viscosity two-component urethane casting compound that is specifically formulated for its flexural and impact strength. It is recommended for use for the production casting of highly..
Cure Time	360 - 480 min <br>@Temperature 24.0 °C	6.00 - 8.00 hour <br>@Temperature 75.2 °F	demold time
BCC Products BC 8782 Urethane Casting BC 8782 produces a high impact rigid 82 Shore D material that is commonly used to make clear or tinted castings of all kinds. When used at room temperature castings 1/8" thick or larger can be readi..
Cure Time	360 min <br>@Temperature 65.0 °C	6.00 hour <br>@Temperature 149 °F
Parker Chomerics CHO-SHIELD® 596 A/B Silver-Epoxy Coating Silver-Epoxy Coating. This is a two-component, silver bearing, highly conductive epoxy paint designed to provide EMI shielding when applied to a dielectric substrate. It is also useful for coating f..
Cure Time	360 min <br>@Temperature 10.0 °C	6.00 hour <br>@Temperature 50.0 °F	Light Load
Chesterton ARC NVE VC Vinyl Ester Sealer Description: ARC NVE VC (Veil Coat) is a two-component, modified epoxy novolac vinyl ester sealer coat formulated for application by brush, roller or spray at 0.15-0.25 mm (0.07-0.010”) wet film th..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Stainless steel, handling strength
Permabond A113 Anaerobic Threadlocker Designed for the locking and sealing of metal parts, Permabond® A113 is ideally suited for use on components that need to be dismantled for maintenance. Giving vibration resistance it can be used ..
Cure Time	360 - 1440 min <br>@Temperature 23.0 °C	6.00 - 24.0 hour <br>@Temperature 73.4 °F	Zinc, working strength
Permabond A113 Anaerobic Threadlocker Designed for the locking and sealing of metal parts, Permabond® A113 is ideally suited for use on components that need to be dismantled for maintenance. Giving vibration resistance it can be used ..
Cure Time	360 min <br>@Temperature 23.0 °C	6.00 hour <br>@Temperature 73.4 °F	Stainless steel, handling strength
Permabond A118 Anaerobic Retainer Permabond® A118 is an anaerobic adhesive designed to provide permanent locking and sealing of metal parts such as bearings, gears, studs and other threaded components. It exhibits high strength, ex..