Polymer Property : Cure Time = 72.0 hour Product List

Processing Properties

Tips: 30 items are displayed at most.

Processing Properties	Metric	English	Comments
Cure Time	4320 min <br>@Temperature 25.0 °C	72.0 hour <br>@Temperature 77.0 °F	Recommended Cure
Parker Chomerics Tecknit® 72-00005 Silver-Filled Flexible Resin Caulking System Description: TECKNIT standard electrically conductive caulks consist of four one-component resin systems filled with silver plated glass or copper particles. These systems are formulated to provide ..
Cure Time	4320 min <br>@Temperature 23.0 °C	72.0 hour <br>@Temperature 73.4 °F
Parker Chomerics THERM-A-FORM T644 Cure-in-Place Potting and Underfill Material Description: THERM-A-FORM™ thermally conductive silicone elastomer products are dispensable form-in-place compounds designed for heat transfer without excessive compressive force in electronics co..
Cure Time	4320 min <br>@Temperature 23.0 °C	72.0 hour <br>@Temperature 73.4 °F	M10 steel, full strength
Permabond LH050 Anaerobic Threadsealant Permabond® LH050 pipe sealant with PTFE is a general purpose pipe sealant that provides instant air pressure seal up to 1000 psi with limited hand tightening. After cure, the sealing capability is ..
Cure Time	4320 min <br>@Temperature 23.0 °C	72.0 hour <br>@Temperature 73.4 °F	M10 steel, full strength
Permabond LH050P Pure Anaerobic Threadsealant PERMABOND® LH050 PURE anaerobic pipe sealant is single component paste that cures only when in contact with metal parts and oxygen is excluded. The sealant fills up the entire space between male an..
Cure Time	4320 - 5760 min <br>@Temperature 25.0 °C	72.0 - 96.0 hour <br>@Temperature 77.0 °F	Complete Cure Cycle
Northstar Polymers GK-7 Low Viscosity Polyurethane Gel Cast This material is formulated for production of thin polyurethane gel film or parts. The low viscosity property of the mixed component enables the user to cast this into a thin layer without entrappi..
Cure Time	4320 - 7200 min <br>@Temperature 25.0 Â°C	72.0 - 120 hour <br>@Temperature 77.0 Â°F	Complete
Lord Adhesives Thermosetâ„¢ MD-200 Electrically Conductive Die-Attach Adhesive This is a system with the versatility to fit a wide variety of production and performance needs. The working life allows sufficient time for short production interruption. It can be initially cured ..
Cure Time	4320 - 14400 min <br>@Temperature 93.3 °C	72.0 - 240 hour <br>@Temperature 200 °F
Master Bond EP21LVSP6 Two component epoxy for bonding, sealing, coating and encapsulating Product Description: Master Bond EP21LVSP6 is a two component epoxy compound for high performance bonding, coating, sealing and encapsulating. It is formulated to cure at room temperature or more ra..
Cure Time	4320 - 7200 min <br>@Temperature 23.9 °C	72.0 - 120 hour <br>@Temperature 75.0 °F
Master Bond EP30-D10 Abrasion Resistant, Flexible Adhesive Compound Description: Master Bond Polymer System EP30-D10 is a versatile two component, abrasion resistant elastomer featuring superior strength, toughness and chemical resistance for high performance bondin..
Cure Time	4320 min <br>@Temperature 25.0 °C	72.0 hour <br>@Temperature 77.0 °F
Tra-Con Tra-Bond 716C01 Medium Viscosity Epoxy Adhesive TRA-BOND 716C01 is a medium viscosity epoxy resin system specifically developed for bonding and coating applications. This two-part amber adhesive is easily mixed, used and cured at room temperature..
Cure Time	4320 min <br>@Temperature 25.0 °C	72.0 hour <br>@Temperature 77.0 °F
Tra-Con Tra-Bond 724-14C Polyurethane Adhesive TRA-BOND 724-14C premixed and frozen, polyurethane adhesive is designed for good adhesion, providing strong, resilient bonds to a wide variety of substrates, including aluminum, solder, nylon, mylar..
Cure Time	4320 min <br>@Temperature 25.0 °C	72.0 hour <br>@Temperature 77.0 °F
Tra-Con Tra-Bond FDA12 Food and Drug Application Epoxy Adhesive TRA-BOND FDA12 is a medium viscosity epoxy resin system specifically developed for bonding and coating applications in accordance with Title 21, U.S. Code of Federal Regulations, Food and Drug Admin..
Cure Time	4320 min <br>@Temperature 25.0 °C	72.0 hour <br>@Temperature 77.0 °F
Tra-Con Tra-Bond Ablebond 862-2 Room Temperature Cure Epoxy Adhesive Ablebond 862-2 room temperature curing epoxy adhesive is designed for solder pad encapsulation or sealing the head/disk area in floppy disc assemblies. This resilient compound is suitable for bondin..
Cure Time	4320 min <br>@Temperature 16.0 °C	72.0 hour <br>@Temperature 60.8 °F	Full Chemical
Chesterton ARC 890 Course Grade Sliding Wear Compound An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is normally applied at the thickness of 6 mm (1/4”)..
Cure Time	4320 min <br>@Temperature 10.0 °C	72.0 hour <br>@Temperature 50.0 °F	Full Load
Chesterton ARC 982 100% Novolac acid resistant coating Description: An advanced polymer composite formulated to protect equipment from extreme chemical attack and corrosion. A low viscosity composite that is applied by brush, squeegee, or a plural compo..
Cure Time	4320 min <br>@Temperature 16.0 °C	72.0 hour <br>@Temperature 60.8 °F	Full Chemical
Chesterton ARC I BX1 Impact & Wear Resistant Epoxy Composite Description: An advanced grade epoxy and urethane composite for the repair and protection of all metal surfaces subjected to severe abrasion and impact. It is normally applied at a thickness of 6 mm..
Cure Time	4320 min <br>@Temperature 10.0 °C	72.0 hour <br>@Temperature 50.0 °F	Full Load
Chesterton ARC S1 General purpose coating Description: An advanced polymer composite formulated to protect metal surfaces from corrosion and chmical attack. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrink..
Cure Time	4320 - 7200 min <br>@Temperature 25.0 °C	72.0 - 120 hour <br>@Temperature 77.0 °F
Cytec Conathane® CE-1175 (Conap) Polyurethane Dielectric Conformal Coating Dielectric Conformal Coatings for ElectronicsCytec dielectric conformal coatings are the most widely used conformal coatings in industry today for such divergent applications as aircraft avionics, i..
Cure Time	4320 min <br>@Temperature 23.0 °C	72.0 hour <br>@Temperature 73.4 °F
Epoxy Technology EPO-TEK® 301-2FL Low Stress, Optical Epoxy Product Description: EPO-TEK® 301-2FL is a two component optical, medical, and semiconductor grade epoxy resin. It is a more flexible version of EPO-TEK® 301-2.Advantages & Application Notes: Sug..
Cure Time	4320 min <br>@Temperature 23.0 °C	72.0 hour <br>@Temperature 73.4 °F	Minimum Bond Line
Epoxy Technology EPO-TEK® E4110 Electrically Conductive, Silver Epoxy Product Description: EPO-TEK® E4110 is an electrically conductive, silver-filled epoxy paste. This two component system is designed for low temperature curing from ambient to 80°C, although other..
Cure Time	4320 min <br>@Temperature 23.0 °C	72.0 hour <br>@Temperature 73.4 °F
Epoxy Technology EPO-TEK® EJ2189 Electrically Conductive Epoxy Product Description: EPO-TEK® EJ2189 is an electrically conductive, silver-filled epoxy paste. This two component system is designed for low temperature curing from ambient to 80°C, although othe..
Cure Time	4320 min <br>@Temperature 10.0 °C	72.0 hour <br>@Temperature 50.0 °F	Full Load
Chesterton ARC MX2 High Wear Fine Particle Wear Compound Description: An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion and chemical attack. It is applied at a thickness of 3 mm (1/8”..
Cure Time	4320 min <br>@Temperature 25.0 °C	72.0 hour <br>@Temperature 77.0 °F
Atom Adhesives AA-BOND FDA16 Epoxy Adhesive AA-BOND FDA16 is a medium viscosity epoxy resin system specifically developed for medical device applications. AA-BOND FDA16 has been tested in accordance with USP biological reactivity tests, in vi..
Cure Time	4320 - 7200 min <br>@Temperature 24.0 °C	72.0 - 120 hour <br>@Temperature 75.2 °F	full cure
BCC Products BC 8675E Polyurethane Elastomer BC 8675E is a multi-purpose elastomer that can perform many functions. Typical product features are: easy to use, cures at room temperature, resists moisture absorption, excellent in use for molds f..
Cure Time	4320 - 11520 min <br>@Temperature 20.0 °C	72.0 - 192.0 hour <br>@Temperature 68.0 °F	(3-8 Days)
Abatron AboCast/AboCure 7606-1 Epoxy AboCast 7606-1 is a transparent, light amber resin with a weight of 9.5 lbs/gallon and a viscosity of 2100 cps approx. @ 25°C. AboCure 7606-1 is a transparent, light amber converter with a weight o..