Polymer Property : Cure Time = 720 min Product List

Processing Properties

Tips: 30 items are displayed at most.

Processing Properties	Metric	English	Comments
Cure Time	720 - 1440 min <br>@Temperature 23.0 °C	12.0 - 24.0 hour <br>@Temperature 73.4 °F
Resin Technology Group 120-EX Oxy-Bond™ Two-Component Epoxy Adhesive Oxy-Bond and Millenium Adhesive SystemsEngineered for strength, durability, lightness, and formability, our Oxy-Bond and Millenium lines offer adhesives with physical and electrical properties to ma..
Cure Time	720 - 1080 min <br>@Temperature 25.0 °C	12.0 - 18.0 hour <br>@Temperature 77.0 °F
Resin Technology Group KONA 871 Low Cost Epoxy Resin Mix ratio 100 to 25 by weight.Kona 871 is a low cost epoxy resin system developed for production casting, potting, encapsulating and coating applications where easy handling, good flowability and lo..
Cure Time	720 min <br>@Temperature 25.0 Â°C	12.0 hour <br>@Temperature 77.0 Â°F	Permit Handling
Lord Adhesives AeroglazeÂ® Z306 Absorptive Polyurethane AeroglazeÂ® Z306 absorptive polyurethane coating is primarily for applications to substrates used in space operations. These operations include those where coatings must exhibit low outgassing cha..
Cure Time	720 min <br>@Temperature 25.0 Â°C	12.0 hour <br>@Temperature 77.0 Â°F	Permit Handling
Lord Adhesives AeroglazeÂ® Z307 Absorptive Conductive Polyurethane AeroglazeÂ® Z307 black absorptive conductive polyurethane coating is primarily for application to substrates used on spacecraft. These applications include those where coatings must exhibit low ou..
Cure Time	720 min <br>@Temperature 23.9 °C	12.0 hour <br>@Temperature 75.0 °F	followed by 2 hrs at 150-200°F
Master Bond EP21HTND High Temperature Resistant, Non-Drip Epoxy Compound Description: Master Bond EP21HTND is a two component, room temperature curing epoxy adhesive, sealant and coating with a paste viscosity and non-drip application feature. Its features are easy handl..
Cure Time	720 - 1440 min <br>@Temperature 23.9 °C	12.0 - 24.0 hour <br>@Temperature 75.0 °F	plus 2 hrs at 150-200°F
Master Bond EP21LV-LO Two Component, Lower Viscosity, Room Temperature Curing Epoxy System Product Description: Master Bond EP21LV-LO is a two component, lower viscosity, room temperature curing epoxy system for high performance bonding, sealing, coating and encapsulation. This user frien..
Cure Time	720 - 1440 min <br>@Temperature 23.9 °C	12.0 - 24.0 hour <br>@Temperature 75.0 °F	plus 2 hrs at 150-200°F
Master Bond EP21NDFG Two component epoxy compound for high performance applications Product Description: Master Bond EP21NDFG is a two component, room temperature curing epoxy adhesive featuring outstanding physical properties, easy processing and a non-drip, paste-like consistency..
Cure Time	720 - 1440 min <br>@Temperature 23.9 °C	12.0 - 24.0 hour <br>@Temperature 75.0 °F	plus 2 hrs at 150-200°F
Master Bond EP21NDLO Low Outgassing, Room Temperature Curing Two Component Epoxy Master Bond EP21ND-LO is a two component, room temperature curing epoxy system for bonding, sealing and coating featuring outstanding physical properties. EP21ND-LO has a convenient one to one mix r..
Cure Time	720 min <br>@Temperature 23.9 °C	12.0 hour <br>@Temperature 75.0 °F	Followed by 2-3 hours at 150-200°F (Optimum Cure Schedule)
Master Bond EP21TDC-2ND Two component, highly flexibilized, non-drip epoxy resin compound Product Description: Master Bond EP21TDC-2ND is a two component highly flexible epoxy resin system for high performance bonding, sealing and coating with a non-drip consistency. It has a forgiving o..
Cure Time	720 min <br>@Temperature 23.9 °C	12.0 hour <br>@Temperature 75.0 °F	Followed by 2-3 hours at 150-200°F (Optimum Cure Schedule)
Master Bond EP21TDC-4ND Two component, highly flexibilized epoxy for bonding, sealing and coating Product Description: Master Bond EP21TDC-4ND is a two component, very flexible epoxy system for high performance bonding, sealing and coating with a non-drip consistency. It has a one to four mix ra..
Cure Time	720 min <br>@Temperature 82.2 °C	12.0 hour <br>@Temperature 180 °F
Zyvex Performance Materials Arovex™ HT 250 Nano-Engineered Composite Prepreg System Arovex® HT 250 Prepreg is a 180°F (82°C) to 280°F (138°C) curing carbon nanotube strengthened epoxy prepreg suitable for numerous composites applications. Normal curing takes place at 250°F (1..
Cure Time	720 min <br>@Temperature 50.0 °C	12.0 hour <br>@Temperature 122 °F
Tra-Con Tra-Duct 29121 Snap Cure Conductive Silver Epoxy Adhesive TRA-DUCT 29121 is 100% solids, two component silver filled epoxy designed for chip bonding in microelectronic and optoelectronic applications. TRA-DUCT 29121 is a soft, smooth paste. This two-part f..
Cure Time	720 min <br>@Temperature 50.0 °C	12.0 hour <br>@Temperature 122 °F
Tra-Con Tra-Duct 925M01 Low Ion Snap Cure Silver-Filled Epoxy TRA-DUCT 925M01 is a low ion snap cure silver-filled epoxy. TRA-DUCT 925M01 develops strong, durable, void free electrically and thermally conducting bonds. The product can be screen printed, stenci..
Cure Time	720 - 1440 min <br>@Temperature 23.0 °C	12.0 - 24.0 hour <br>@Temperature 73.4 °F
Master Bond EP27 Low Temperature Curing Two Component Epoxy Master Bond Polymer System EP27 is a unique two component epoxy formulation offers relatively fast cures at temperatures as low as 40°F and below, with curing times much shorter than currently exis..
Cure Time	720 min <br>@Temperature 65.6 - 93.3 °C	12.0 hour <br>@Temperature 150 - 200 °F	followed by 2-3 hrs at 150°-200°F
Master Bond EP42HT-2FG Two Component Epoxy Adhesive for Food Applications Master Bond Polymer System EP42HT-2FG is a room temperature setting, two component epoxy adhesive, sealant and coating specially formulated for food applications. It has been independently tested an..
Cure Time	720 min <br>@Temperature 32.0 °C	12.0 hour <br>@Temperature 89.6 °F	Full Load
Chesterton ARC 855 Abrasion Control Liquid Description: An advanced ceramic composite formulated to protect equipment from aggressive chemical attack, corrosion, and erosion. The product is a low viscosity composite that is easily applied by..
Cure Time	720 min <br>@Temperature 43.0 °C	12.0 hour <br>@Temperature 109 °F	Full Load
Chesterton ARC 858 Abrasion resistant rebuilding and faring composite An advanced ceramic composite for the repair and protection of all metal surfaces subjected to erosion, corrosion and chemical attack. It is normally applied at a thickness of 0.15 mm (60 mils) or m..
Cure Time	720 min <br>@Temperature 43.0 °C	12.0 hour <br>@Temperature 109 °F	Full Load
Chesterton ARC 890 Course Grade Sliding Wear Compound An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is normally applied at the thickness of 6 mm (1/4”)..
Cure Time	720 min <br>@Temperature 43.0 °C	12.0 hour <br>@Temperature 109 °F	Full Load
Chesterton ARC BX1 Sliding Wear Compound Description: An advanced contractor grade ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is normally applied at..
Cure Time	720 min <br>@Temperature 32.0 °C	12.0 hour <br>@Temperature 89.6 °F	Light Load
Chesterton ARC S1 General purpose coating Description: An advanced polymer composite formulated to protect metal surfaces from corrosion and chmical attack. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrink..
Cure Time	720 min <br>@Temperature 10.0 °C	12.0 hour <br>@Temperature 50.0 °F	Overcoat Begin
Chesterton ARC S7 High Temperature & Chemical Resistant Novolac Vinyl Ester Coating Description: ARC S7 is a low VOC, epoxy novolac vinyl ester based coating intended for high temperature exposures in chemically aggressive applications where the risk for thermal cycling may be pres..
Cure Time	720 - 960 min <br>@Temperature 60.0 °C	12.0 - 16.0 hour <br>@Temperature 140 °F
Cytec EN-2550 (Conap) Potting and Encapsulation Adhesive Polyurethane Potting and Encapsulating SystemsConathane® EN-2500 series polyurethane potting and encapsulating systems from Cytek have varying degrees of worklife, viscosity and hardness for many s..
Cure Time	720 min <br>@Temperature 43.0 °C	12.0 hour <br>@Temperature 109 °F	Full Load
Chesterton ARC MX2 High Wear Fine Particle Wear Compound Description: An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion and chemical attack. It is applied at a thickness of 3 mm (1/8”..
Cure Time	720 min <br>@Temperature 43.0 °C	12.0 hour <br>@Temperature 109 °F	Full Chemical
Chesterton ARC MX5 Rapid Curing Fine Particle Wear Compound Description: An advanced ceramic reinforced composite for the emergency repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is applied at a th..
Cure Time	720 - 1440 min <br>@Temperature 23.0 °C	12.0 - 24.0 hour <br>@Temperature 73.4 °F	Recommended Cure
Aremco Aremco-Bond™ 2220 High Performance Epoxide Ceramic-Filled, High Chemical Resistance, Machinable. For Repairing Deeply-Corroded Parts.
Cure Time	720 min <br>@Temperature 75.0 °C	12.0 hour <br>@Temperature 167 °F	Dust Free, at 50% humidity
Blue River Coatings CRC100-H BLUE RIVER COATINGS CRC100-H is a two-component inorganic corrosion resistant coating designed for Original Equipment Manufacturers (OEM) to protect metal substrates from corrosion and abrasion. If ..
Cure Time	720 - 1080 min <br>@Temperature 24.0 °C	12.0 - 18.0 hour <br>@Temperature 75.2 °F
BCC Products BC 7053 Epoxy Casting BC 7053 is an iron filled epoxy casting system. This system is a high iron content material that provides unsurpassed wear resistance. BC7053 was designed for use in constructing core boxes, holding..
Cure Time	720 min <br>@Temperature 16.0 °C	12.0 hour <br>@Temperature 60.8 °F	Foot Traffic
Chesterton ARC CS2 Low-viscosity, Composite concrete primer sealer Description: An advanced composite formulated to protect concrete surfaces from mild chemical attack. It is normally applied at a thickness of 250-375 microns (10-15 mils) per coat. Non-shrinking. 1..
Cure Time	720 min <br>@Temperature 43.0 °C	12.0 hour <br>@Temperature 109 °F	Full Load
Chesterton MRS 58 Metal Rebuilding System An advanced ceramic composite for the repair and protection of all metal surfaces subjected to erosion, corrosion and chemical attack. It is normally applied at a thickness of 1.5 mm (60 mils) or mo..