- HOME
- POLYMER SEARCH
- Polymer Property : Nozzle Temperature = 428 °F
Polymer Property : Nozzle Temperature = 428 °F Product List
Processing PropertiesTips: 30 items are displayed at most.
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Nozzle Temperature | 200 - 220 °C | 392 - 428 °F | |
|
Noltex Soarnol® D2908 Ethylene Vinyl Alcohol Copolymer
Ethylene content 29 mol%. Volatile matter 0.3%.The gas barrier property of Soarnol is about forty times better than that of nylon, therefore, Soarnol allows design of lower cost packages by using a..
|
|||
| Nozzle Temperature | 200 - 220 °C | 392 - 428 °F | |
|
Noltex Soarnol® DC3203F Ethylene Vinyl Alcohol Copolymer
Low ethylene content. Suitable for use in packaging material used at normal temperature and humidity. Ethylene content 32 mol%. Volatile matter 0.3%.Information provided by Soarus, LLC. In the Un..
|
|||
| Nozzle Temperature | 175 - 220 °C | 347 - 428 °F | Average value: 189 °C Grade Count:26 |
|
Overview of materials for Acetal Copolymer, Carbon Fiber Filled
This property data is a summary of similar materials in the MatWeb database for the category "Acetal Copolymer, Carbon Fiber Filled". Each property range of values reported is minimum and maximum va..
|
|||
| Nozzle Temperature | 175 - 220 °C | 347 - 428 °F | Average value: 201 °C Grade Count:5 |
|
Overview of materials for Acetal Copolymer, Mineral Filled
This property data is a summary of similar materials in the MatWeb database for the category "Acetal Copolymer, Mineral Filled". Each property range of values reported is minimum and maximum values ..
|
|||
| Nozzle Temperature | 190 - 220 °C | 374 - 428 °F | |
|
Noltex Soarnol® ET3808 Ethylene Vinyl Alcohol Copolymer
Ethylene content 38 mol%. Volatile matter 0.3%.The gas barrier property of Soarnol is about forty times better than that of nylon, therefore, Soarnol allows design of lower cost packages by using a..
|
|||
| Nozzle Temperature | 190 - 220 °C | 374 - 428 °F | Injection Molding |
|
LG Chemical ALPHALAC SG970 HIPS
Description: Injection Molding, General Purpose, Good Processability, High glossApplication: Air Conditioner Panel, Washer CoverCAS No. 9003-55-8Information provided by LG Chemical
|
|||
| Nozzle Temperature | 190 - 220 °C | 374 - 428 °F | Injection Molding |
|
LG Chemical GPPS 25SP(E) PS, High Transparency, Heat Resistance
Description: Injection Molding, PS, High Transparency, Heat ResistanceApplication: PSP, Food Tray, Electric/Electrical Component, CoatingCAS: 9003-53-6Information provided by LG Chemical
|
|||
| Nozzle Temperature | 190 - 220 °C | 374 - 428 °F | Injection Molding |
|
LG Chemical HIPS 60HRI PS, Impact Modified
Description: Injection Molding, PS, General Purpose, Impact ModifiedApplication: TV Sets, Tape Recorders, Vacuum Cleaner, Washing Machine, Air ConditionerCAS: 9003-55-8Information provided by LG Che..
|
|||
| Nozzle Temperature | 200 - 220 °C | 392 - 428 °F | Injection Molding |
|
LG Chemical KEYFLEX BT 1040D Ester Type TPE
Description: Injection Molding, TPC-ET, General Purpose, Medium ModulusApplication: Antenna Cover, Injection Parts for Leisure & SportsCAS: 37282-12-5Information provided by LG Chemical
|
|||
| Nozzle Temperature | 200 - 220 °C | 392 - 428 °F | Injection Molding |
|
LG Chemical KEYFLEX BT 1140D Ester Type TPE
Description: Injection Molding, TPC-ET, General Purpose, Medium ModulusApplication: Cable & Wire Jackets, Hose & Tubing, SheetCAS: 37282-12-5Information provided by LG Chemical
|
|||
| Nozzle Temperature | 200 - 220 °C | 392 - 428 °F | |
|
LG Chemical LUCEL CF-610 Electrically Conductive POM, 10% Carbon Fiber Filled, High Strength, Wear Resistant
LUCEL semi-crystalline acetal copolymer resins are produced by gas phase polymerization. LUCEL resins can be widely accepted as the replacement of thermosets, aluminum and zinc die-casts or other m..
|
|||
| Nozzle Temperature | 200 - 220 °C | 392 - 428 °F | |
|
LG Chemical LUCEL CF-620 Electrically Conductive POM, 20% Carbon Fiber Filled, High Strength, Wear Resistant
LUCEL semi-crystalline acetal copolymer resins are produced by gas phase polymerization. LUCEL resins can be widely accepted as the replacement of thermosets, aluminum and zinc die-casts or other m..
|
|||
| Nozzle Temperature | 200 - 220 °C | 392 - 428 °F | Injection Molding |
|
LG Chemical LUCEL GC210 POM+GF10%, High Rigidity
Feature: Injection Molding, POM+GF10%, High RigidityApplication: Casings of Pump and Pivot BearingsCAS No. 66455-31-0 and 65997-17-3Information provided by LG Chemical
|
|||
| Nozzle Temperature | 200 - 220 °C | 392 - 428 °F | Injection Molding |
|
LG Chemical LUCEL GC240 POM+GF40%, High Rigidity
Feature: Injection Molding, POM+GF40%, High RigidityApplication: Casings of Pump and Pivot BearingsCAS No. 66455-31-0 and 65997-17-3Information provided by LG Chemical
|
|||
| Nozzle Temperature | 200 - 220 °C | 392 - 428 °F | |
|
LG Chemical LUCEL WK-320 Wear Resistant POM, 20% Mineral Filled, High Modulus
LUCEL semi-crystalline acetal copolymer resins are produced by gas phase polymerization. LUCEL resins can be widely accepted as the replacement of thermosets, aluminum and zinc die-casts or other m..
|
|||
| Nozzle Temperature | 200 - 220 °C | 392 - 428 °F | |
|
Lubrizol Advanced Materials PEARLTHANE® Clear 15N85 Thermoplastic Polyurethane Elastomer
Type : Pearlthane® CLEAR 15N85 is a polyether copolymer-based thermoplastic polyurethane.Main Application : Injection MouldingSpecial Features : Outstanding colour, a very low yellowness index as..
|
|||
| Nozzle Temperature | 190 - 220 °C | 374 - 428 °F | Injection Molding |
|
LG Chemical 82TR SAN, High Transparency, Heat Resistance, Chemical Resistance
Feature: Injection Molding, SAN, High Transparency, Heat Resistance, Chemical ResistanceApplication: Refrigerator Sleeves, MiscellaneousCAS No. 9003-54-7Information provided by LG Chemical
|
|||
| Nozzle Temperature | 190 - 220 °C | 374 - 428 °F | Injection Molding |
|
LG Chemical 90HR SAN, High Transparency, Heat Resistance, Chemical Resistance
Feature: Injection Molding, SAN, High Transparency, Heat Resistance, Chemical ResistanceApplication: Battery Case, Light CoverCAS No. 9003-54-7Information provided by LG Chemical
|
|||
| Nozzle Temperature | 190 - 220 °C | 374 - 428 °F | Injection Molding |
|
LG Chemical ALPHALAC SG970NSU HIPS
Description: Injection Molding, General Purpose, Good Processability, High gloss, antistatic and UV stabilizedApplication: Air Conditioner Panel, Washer CoverCAS No. 9003-55-8Information provided by..
|
|||
| Nozzle Temperature | 200 - 220 °C | 392 - 428 °F | Injection Molding |
|
LG Chemical XG568 MABS, Anti-Scratch, High Gloss
Feature: Injection Molding, Anti-Scratch, High GlossApplication: LCD TV Front Cabinet, Bezel, Audio/Video HousingCSA No. 9011-14-7 and 9003-56-9Information provided by LG Chemical
|
|||
| Nozzle Temperature | 210 - 220 °C | 410 - 428 °F | Injection |
|
Lubrizol Estane® GP 58 DT Thermoplastic Polyurethane
Type: Estane® GP 58DT is an aromatic polyether-based thermoplastic polyurethane (TPU).Features: Translucent spherical pellets.Uses: Injection molding parts, animal identification tagsAvailable in E..
|
|||
| Nozzle Temperature | 180 - 220 °C | 356 - 428 °F | |
|
Unitika TERRAMAC TE-1030 Polylactic Acid (PLA)
High-Impact grade, Injection grade. Bio-based materials produced from annually renewable raw materials.Information provided by Unitika Ltd.
|
|||
| Nozzle Temperature | 180 - 220 °C | 356 - 428 °F | |
|
Unitika TERRAMAC TE-1070 Polylactic Acid (PLA)
High-Impact grade, Injection grade. Bio-based materials produced from annually renewable raw materials.Information provided by Unitika Ltd.
|
|||
| Nozzle Temperature | 190 - 220 °C | 374 - 428 °F | Injection |
|
Alliance Polymers Viprene™ G75A-32U-BLK Thermoplastic Vulcanizate Elastomer
Viprene™ G75A-32U-BLK is a UV and Heat Stabilized TVP (Thermoplastic Vulcanizate Elastomer). This material can be easily processed by extrusion or injection molding. It exhibits easy flowing charac..
|
|||
| Nozzle Temperature | 210 - 220 °C | 410 - 428 °F | Injection |
|
Alliance Polymers Zythane™ 5050D Thermoplastic Polyurethane Elastomer
Zythane™ 5050D is a polycaprolactone-based TPU specifically formulated for injection molding applications .It exhibits excellent low compression set, abrasion resistance and toughness and has good ..
|
|||
| Nozzle Temperature | 210 - 220 °C | 410 - 428 °F | Injection |
|
Alliance Polymers Zythane™ 6050D Thermoplastic Polyurethane Elastomer
Zythane™ 6050D is a polycaprolactone-based TPU specifically formulated for injection molding applications .It exhibits excellent low compression set, abrasion resistance and toughness and has good ..
|
|||
| Nozzle Temperature | 180 - 220 °C | 356 - 428 °F | Injection |
|
Samyang Triel® 5300 Thermoplastic Polyether Ester Elastomer
TRIEL® resins offer superior mechanical properties, elasticities, heat and chemical resistance, which allow it to be widely used for electric/electronic equipments, automotive parts and outdoor rec..
|
|||
| Nozzle Temperature | 190 - 220 °C | 374 - 428 °F | Injection Molding |
|
LG Chemical HIPS MI750 PS, Impact Modified
Description: Injection Molding, PS, Impact Modified, High GlossApplication: Electric/Electronic Components, Stationary Articles, Food Containers, etc.CAS: 9003-55-8Information provided by LG Chemica..
|
|||
| Nozzle Temperature | 210 - 220 °C | 410 - 428 °F | Injection Molding |
|
LG Chemical LI912 ASA
Description: Good Weatherability, General PurposeApplication: Mail Box, Sprinkler, Sash Joiner, Toy, Satellite Antenna CoverCAS: 26299-47-8Information provided by LG Chemical
|
|||
| Nozzle Temperature | 200 - 220 °C | 392 - 428 °F | Injection Molding |
|
LG Chemical XG570 MABS, Anti-Scratch, High Impact, High Flow
Feature: Injection Molding, Anti-Scratch, High Impact, High FlowApplication: LCD TV Stand Base, Audio/Video HousingCAS No. 9010-94-0Information provided by LG Chemical
|
|||
Copyright © lookpolymers.com All Rights Reserved