- HOME
- POLYMER SEARCH
- Polymer Property : Mold Temperature = 50.0 °C
Polymer Property : Mold Temperature = 50.0 °C Product List
Processing PropertiesTips: 30 items are displayed at most.
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Mold Temperature | 30.0 - 50.0 °C | 86.0 - 122 °F | |
|
Plastcom PLASTALEN® PQ 81 N 003 Polypropylene with improved impact strength
PP copolymer regranulate for injection molding, impact modified. General use in all industry branches. Delivered in natural mode and in the full RAL color scale.Information Provided by Plastcom spol..
|
|||
| Mold Temperature | 30.0 - 50.0 °C | 86.0 - 122 °F | |
|
Plastcom SLOVALEN PC 59 GB 10 PP, 10% glass beads
FeaturesCompouded homopolymer PP, with the content of 10% chemically bound glass beads and modifier of mechanical properties. Increased strength in comparison with unfilled PP. Use in all industry s..
|
|||
| Mold Temperature | 40.0 - 50.0 °C | 104 - 122 °F | |
|
Plastcom SLOVALEN PC 71 T 10 PP, 10% mineral filling
FeaturesModified copolymer PP for injection moulding with the content of 10% mineral filling. Increased rigidity, strength and thermal use up to 130°C depending on the talc content. Decr eased shri..
|
|||
| Mold Temperature | 30.0 - 50.0 °C | 86.0 - 122 °F | |
|
Plastcom SLOVALEN PH 91 N PP, basic type
FeaturesCompounded homopolymer PP. General use in all industry branches. Packing material, garden flower-pots, toys, furniture industry, guides, dowels, clamps, office chairs, holders etc. Delivered..
|
|||
| Mold Temperature | 40.0 - 50.0 °C | 104 - 122 °F | |
|
Plastcom SLOVALEN PQ 81 T 10 PP, 10% mineral filling
FeaturesModified PP for injection moulding with the content of 10% mineral filling. Increased rigidity, strength and thermal use up to 130°C depending on the talc content. Decreased shrinkage. Gene..
|
|||
| Mold Temperature | 16.0 - 50.0 °C | 60.8 - 122 °F | |
|
PolyOne Maxxam™ NT-818.B001-8000 Polypropylene, Unspecified (PP, Unspecified)
PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium car..
|
|||
| Mold Temperature | 16.0 - 50.0 °C | 60.8 - 122 °F | |
|
PolyOne Maxxam™ NT-818.G002-1000 Polypropylene, Unspecified (PP, Unspecified)
PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium car..
|
|||
| Mold Temperature | 16.0 - 50.0 °C | 60.8 - 122 °F | |
|
PolyOne Maxxam™ NT-818.G002-8000 Polypropylene, Unspecified (PP, Unspecified)
PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium car..
|
|||
| Mold Temperature | 30.0 - 50.0 °C | 86.0 - 122 °F | |
|
PolyOne OnFlex™ S HF 50A-3S1981 Thermoplastic Elastomer (TPE)
OnFlex™-S HF thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds utilize a unique, patent pending halogen free flame retardancy system. Fu..
|
|||
| Mold Temperature | 20.0 - 50.0 °C | 68.0 - 122 °F | |
|
Polykemi AB POLYfill PPH 150DNH Polypropylene Homopolymer, Flame Retardant, Halogen Free
Information provided by Polykemi AB
|
|||
| Mold Temperature | 16.0 - 50.0 °C | 60.8 - 122 °F | |
|
PolyOne Maxxam™ DP-9156-5-8000 Polypropylene Copolymer (PP Copolymer)
PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium car..
|
|||
| Mold Temperature | 30.0 - 50.0 °C | 86.0 - 122 °F | |
|
Plastcom SLOVAMID 6 FRC 2 218/1M PA6, flame retardant
Packaging, transport, stockingThe product is packed in hermetically closed thick-walled 25 kg PE bags, on a 1.000 kg palette coated in a stretch foil, in big bags with a thick PE foil fixed on a 1.0..
|
|||
| Mold Temperature | 20.0 - 50.0 °C | 68.0 - 122 °F | |
|
Polykemi AB POLYfill PPH 30030DNH Polypropylene Homopolymer, Flame Retardant, Halogen Free
Information provided by Polykemi AB
|
|||
| Mold Temperature | 15.0 - 50.0 °C | 59.0 - 122 °F | |
|
Inno-Comp INNOPOL® CS 1-7120 AP 20% Talc Filled Polypropylene Homopolymer
INNOPOL® CS 1-7120 is a 20 % talc-filled polypropylene homopolymer compound. This grade is available in natural and custom colored form.INNOPOL® CS 1-7120 is recommended for extrusion of sheet..
|
|||
| Mold Temperature | 25.0 - 50.0 °C | 77.0 - 122 °F | |
|
Huntsman AVALON® 92 AB Thermoplastic Polyurethane
Introduction: AVALON 92 AB is a high performance polyester based thermoplastic polyurethane for injection molding. AVALON 92 AB is part of the AVALON Performance Range and offers a premium soling ma..
|
|||
| Mold Temperature | 25.0 - 50.0 °C | 77.0 - 122 °F | |
|
Huntsman AVALON® 92 AE Thermoplastic Polyurethane
Introduction: AVALON 92 AE is a general purpose polyester based thermoplastic polyurethane for injection molding. AVALON 92 AE is part of the AVALON Perform Range and offers a premium soiling materi..
|
|||
| Mold Temperature | 25.0 - 50.0 °C | 77.0 - 122 °F | |
|
Huntsman AVALON® 95 AEU Thermoplastic Polyurethane
Introduction: AVALON 95 AEU is a general purpose polyester based thermoplastic polyurethane for injection molding. AVALON 95 AEU is part of the AVALON Perform Range and offers a premium soiling mate..
|
|||
| Mold Temperature | 20.0 - 50.0 °C | 68.0 - 122 °F | |
|
Solvay TECHNYL® PSB 286 PA6, DRY
Description: Unreinforced polyamide PA6, with very good lubrication, standard for fast injection cycles, for injection molding.Available in: North AmericaProduct Applications: This grade has high fl..
|
|||
| Mold Temperature | 30.0 - 50.0 °C | 86.0 - 122 °F | |
|
Sumitomo Chemical ESPOLEX® 903 Thermoplastic Elastomer
ESPOLEX® TPE Series is a group of thermoplastic elastomers produced by Sumitomo Chemical Company. Among its material advantages, ESPOLEX® TPE Series is distinguished by offering many low-densi..
|
|||
| Mold Temperature | 30.0 - 50.0 °C | 86.0 - 122 °F | |
|
Borealis BF335SA Polypropylene Copolymer
BF335SA is a polypropylene copolymer intended for injection molding. This material has a very high impact strength while maintaining good stiffness, gives a good surface quality and is
easy to proc..
|
|||
| Mold Temperature | 20.0 - 50.0 °C | 68.0 - 122 °F | |
|
Borealis BJ380MO Polypropylene Copolymer
BJ380MO is a very high melt flow heterophasic copolymer with high/medium impact strength and stiffness. This grade is designed for high-speed injection molding and contains nucleating and antistatic..
|
|||
| Mold Temperature | 30.0 - 50.0 °C | 86.0 - 122 °F | |
|
Borealis Daplen™ EE108U Polypropylene TPO Compound
Daplen™ EE108U is a 10% mineral filled elastomer modified polypropylene compound intended for injection molding. This material has an excellent balance between impact strength and stiffness, gives..
|
|||
| Mold Temperature | 30.0 - 50.0 °C | 86.0 - 122 °F | |
|
Borealis Daplen™ EH104AE Polypropylene TPO Compound
Daplen™ EH104AE is a 10% mineral filled elastomer modified polypropylene compound intended for injection molding. This material has an excellent balance between impact strength and stiffness, high..
|
|||
| Mold Temperature | 30.0 - 50.0 °C | 86.0 - 122 °F | |
|
Borealis PS65C40 Polypropylene Compound, Mineral Filled
PS65C40 is a 40% mineral filled polypropylene compound intended for injection molding. This material has an excellent balance between impact strength and stiffness, gives a good surface quality and..
|
|||
| Mold Temperature | 30.0 - 50.0 °C | 86.0 - 122 °F | |
|
Eurostar Starflam MF0044 PP, Glass Fiber Filled, Flame Retardant, Injection Molded
Starflam MF0044 is a Halogen Free Flame Retardant, Glass Fiber Reinforced, PP Injection Molding ResinInformation provided by Eurostar.
|
|||
| Mold Temperature | 30.0 - 50.0 °C | 86.0 - 122 °F | |
|
Eurostar Starpylen MFB44S PP, Glass Bead/Glass Fiber Filled
Starpylen MFB44S is a Glass Beads, Glass Fiber Reinforced, Polypropylene Injection Molding Resin heat stabilized (also known as Starpylen WS 2020VK S37.7)Information provided by Eurostar.
|
|||
| Mold Temperature | 30.0 - 50.0 °C | 86.0 - 122 °F | |
|
Eurostar Starpylen MFM43S PP, Glass/Mineral Filled, Injection Molded
Starpylen MFM43S is a Mineral Filled, Glass Fiber Reinforced, Polypropylene Injection Molding Resin, also recognized as Starpylen WV 30VMC S37/7 Black 301Information provided by Eurostar.
|
|||
| Mold Temperature | 20.0 - 50.0 °C | 68.0 - 122 °F | |
|
Polykemi AB POLYfill PP 150ENH Polypropylene, Flame Retardant, Halogen Free
Information provided by Polykemi AB
|
|||
| Mold Temperature | 20.0 - 50.0 °C | 68.0 - 122 °F | Injection-molding |
|
BASF Ultramid® Seal-Fit PA6/66 (Conditioned)
Description: Transparent, tough, amorphous copolyamide for injection molding, specially developed for tight overmoulding of metal inlays.Information provided by BASF
|
|||
| Mold Temperature | 25.0 - 50.0 °C | 77.0 - 122 °F | |
|
Huntsman AVALON® 85 ABU Thermoplastic Polyurethane
Introduction: AVALON 85 ABU is a high performance UV-stabilized polyester based thermoplastic polyurethane for injection molding. AVALON 85 ABU is part of the AVALON Perform Range and offers a premi..
|
|||
Copyright © lookpolymers.com All Rights Reserved