- HOME
- POLYMER SEARCH
- Polymer Property : Drying Temperature = 230 °F
Polymer Property : Drying Temperature = 230 °F Product List
Processing PropertiesTips: 30 items are displayed at most.
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Drying Temperature | 110 °C | 230 °F | |
|
PolyOne Edgetek® XT XT-100-BU01-HF Polycarbonate + PBT (PC+PBT)
EDGETEK™ XT High Performance Polymers are polycarbonate and polyester alloys that combine strength, durability and chemical resistance. The Edgetek XT product family includes a complete line of gen..
|
|||
| Drying Temperature | 110 °C | 230 °F | |
|
PolyOne Edgetek® XT XT-100-BU03 Black Polycarbonate + PBT (PC+PBT)
EDGETEK™ XT High Performance Polymers are polycarbonate and polyester alloys that combine strength, durability and chemical resistance. The Edgetek XT product family includes a complete line of gen..
|
|||
| Drying Temperature | 110 °C | 230 °F | |
|
PolyOne Edgetek® XT XT-100-BW00 Natural Polycarbonate + PBT (PC+PBT)
EDGETEK™ XT High Performance Polymers are polycarbonate and polyester alloys that combine strength, durability and chemical resistance. The Edgetek XT product family includes a complete line of gen..
|
|||
| Drying Temperature | 110 - 130 °C | 230 - 266 °F | Injection Molding |
|
DuPont Performance Polymers Crastin® S650FR BK851 PBT
(Unverified Data**)
Crastin® S650FR is an unreinforced, black, flame retardant polybutylene terephthalate for injection molding.Information provided by DuPont Performance Polymers
|
|||
| Drying Temperature |
110
°C @Time 7200 sec |
230
°F @Time 2.00 hour |
|
|
PolyOne Edgetek® XT XT-115GF-AX01-HF PC+PBT with Glass Fiber Reinforcement
(discontinued **)
EDGETEK™ XT High Performance Polymers are polycarbonate and polyester alloys that combine strength, durability and chemical resistance. The Edgetek XT product family includes a complete line of gen..
|
|||
| Drying Temperature | 110 °C | 230 °F | Injection Molding |
|
DuPont Performance Polymers Hytrel® DYM250S BK472 TPC-ET
(Unverified Data**)
Hytrel® DYM250S BK472 is a medium modulus resin suited for injection molding of Air Bag Deployment Doors. It has a nominal durometer hardness of 49D and contains fine particle size carbon black.In..
|
|||
| Drying Temperature | 110 °C | 230 °F | Blow Molding |
|
DuPont Performance Polymers Hytrel® HTR8223 BK320 TPC-ET
(Unverified Data**)
Hytrel® HTR8223 BK320 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 42D, is pigmented black with fine particle size carbon black, a..
|
|||
| Drying Temperature | 110 °C | 230 °F | Injection Molding |
|
DuPont Performance Polymers Hytrel® HTR8685 BK022A TPC-ET
(Unverified Data**)
Hytrel® HTR8685 BK022A is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 44D, is pigmented black with fine particle size carbon black,..
|
|||
| Drying Temperature | 110 °C | 230 °F | |
|
Ravago Manufacturing Americas Hybrid B2025I Polycarbonate + PBT Alloy
Entec's proprietary products include a full range of compounds in the Nylon 6/6, Nylon 6, ABS, PBT, Polycarbonate, PC/ABS, PC/ASA, PC/PBT, and PPO/PPE resin families.Information provided by Ente..
|
|||
| Drying Temperature |
110
-
120
°C @Time 10800 - 14400 sec |
230
-
248
°F @Time 3.00 - 4.00 hour |
Pre-dry |
|
Kingfa JH720 G50 50% Glass Fiber Reinforced PC
Features:Excellent balance propertiesSuper high stiffnessHigh hardnessGood size stabilitySuper high mechanical strengthApplications:Imaging equipment shellOA body frameElectrical equipmentComputer p..
|
|||
| Drying Temperature |
110
°C @Time 10800 - 14400 sec |
230
°F @Time 3.00 - 4.00 hour |
Pre-dry |
|
Kingfa LONOY 1200 PC/PBT Alloy
Features:Excellent balance propertiesGood weather resistanceGood size stabilitySmooth surfaceUniform colorApplications:Injection moldingAutomobile bumperAutomobile interior/exterior trim partsBusine..
|
|||
| Drying Temperature |
110
-
130
°C @Time 10800 sec |
230
-
266
°F @Time 3.00 hour |
|
|
LATI Later 4 G/30-V0HF1 PBT, 30% Glass Fiber Reinforced, Flame Retardant
Polybutylene Terephthalate (PBT) based compound. Glass fibers. UL94 V-0 classified, halogens-based flame retardants and red phosphorous free. Availability: Africa & Middle East; Asia Pacific; Europe..
|
|||
| Drying Temperature |
110
°C @Time 14400 sec |
230
°F @Time 4.00 hour |
|
|
Solvay Specialty Polymers Amodel® AT-1116 HS Polyphthalamide (PPA), 16% Glass Fiber (Dry)
Amodel® AT-1116 HS polyphthalamide (PPA) is a toughened, heat stabilized 16% glass reinforced resin, designed as a cost effective solution for applications requiring stiffness, good dimensional s..
|
|||
| Drying Temperature | 110 °C | 230 °F | Option 3 |
|
UBE UBESTA® 3030U Nylon 12 (After Formic Acid (10%) for 1000 hours)
Description: UBESTA has a strong resistance to chemicals. Under normal conditions, it is not significantly affected by alkalis, alcohols, ethers, ketones, hydrocarbons, lubricating oils, gasoline, c..
|
|||
| Drying Temperature | 110 °C | 230 °F | Option 3 |
|
UBE UBESTA® 3030U Nylon 12 (After Nitric Acid (10%) for 500 hours)
Description: UBESTA has a strong resistance to chemicals. Under normal conditions, it is not significantly affected by alkalis, alcohols, ethers, ketones, hydrocarbons, lubricating oils, gasoline, c..
|
|||
| Drying Temperature | 110 °C | 230 °F | Option 3 |
|
UBE UBESTA® 3030U Nylon 12 (After Water for 1000 hours)
Description: UBESTA has a strong resistance to chemicals. Under normal conditions, it is not significantly affected by alkalis, alcohols, ethers, ketones, hydrocarbons, lubricating oils, gasoline, c..
|
|||
| Drying Temperature | 110 °C | 230 °F | Option 3 |
|
UBE UBESTA® P3014UMX Powder Electronic Grade Nylon 12
Description: UBESTA Nylon 12 has an excellent termite resistance than other plastics. UBESTA contributes as a material for jacket and sheath which lay for telephone and telegram Communication System..
|
|||
| Drying Temperature | 110 - 120 °C | 230 - 248 °F | Predrying Temperature |
|
Tisan TISESTER® 15% Glass Fiber Reinforced Polybutylene Terephthalate
TISESTER has a wide area of application in automotive, electric/electronics and durable goods industries. General Specifications include: Excellent surface appearanceHigh corrosion and abrasion resi..
|
|||
| Drying Temperature | 110 °C | 230 °F | Option 3 |
|
UBE UBESTA® 3030LUX Rigid Automotive Grade Nylon 12
Description: UBE UBESTA® Automotive grade Nylon 12Comments: UV resistance, heat resistanceInformation provided by UBE.
|
|||
| Drying Temperature | 110 - 121 °C | 230 - 250 °F | |
|
Entec Hylex® P1025G10NHFR Polycarbonate, 10% Glass Reinforced
Entec's proprietary products include a full range of compounds in the Nylon 6/6, Nylon 6, ABS, PBT, Polycarbonate, PC/ABS, PC/ASA, PC/PBT, and PPO/PPE resin families.Information provided by Ente..
|
|||
| Drying Temperature | 110 °C | 230 °F | Blow Molding |
|
DuPont Performance Polymers Hytrel® HTR5612BK TPC-ET
(Unverified Data**)
Hytrel® HTR5612BK HTR5612BK is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal durometer hardness of 54D, is pigmented black with fine particle size..
|
|||
| Drying Temperature | 110 °C | 230 °F | |
|
BASF Ultramid® KR 4350 BK 00464 PA6/6T (Conditioned)
Description: For injection-molding and extrusion, exhibiting high toughness, strength and stiffness, low water absorption, high melting point (295 °C [563°F]). The mechanical properties remain con..
|
|||
| Drying Temperature | 110 °C | 230 °F | |
|
BASF Ultramid® KR 4355 G10 BK 23215 50% Glass Filled PA6/6T (Dry)
Description: 50% glass-fiber reinforced product for injection molding; high toughness and rigidity; low water absorption, high melting point (285°C); mechanical properties remain constant up to 60°..
|
|||
| Drying Temperature | 110 °C | 230 °F | |
|
BASF Ultramid® KR 4355 G5 25% Glass Filled PA6/6T (Conditioned)
Description: 25% glass-fiber reinforced product for injection-molding; high toughness, strength and stiffness, low water absorption, high melting point (295°C [563°F]). The mechanical properties r..
|
|||
| Drying Temperature | 110 - 121 °C | 230 - 250 °F | |
|
PolyOne Edgetek® AM-20CF-20GF/000 Polyphthalamide (PPA), Glass/Carbon Fiber Filled
(discontinued **)
Description/Features:Glass/Carbon Fiber ReinforcedPolyOne First ChoiceInformation provided by PolyOne Corporation.
|
|||
| Drying Temperature | 110 °C | 230 °F | |
|
Solvay Specialty Polymers Amodel® ET-1000 HS Polyphthalamide (PPA)
(Unverified Data**)
Amodel ET-1000 HS is an impact modified, heat stabilized polyphthalamide (PPA) that exhibits exceptional impact strength and toughness. Like all Amodel PPA resins, ET-1000 HS offers high fatigue str..
|
|||
Copyright © lookpolymers.com All Rights Reserved