- HOME
- POLYMER SEARCH
- Polymer Property : Drying Temperature = 82.0 °C
Polymer Property : Drying Temperature = 82.0 °C Product List
Processing PropertiesTips: 30 items are displayed at most.
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Drying Temperature | 82.0 °C | 180 °F | Desiccant drying for 3 hours recommended |
|
Advanced Elastomer Systems Santoprene® 181-55 Thermoplastic Rubber
(discontinued **)
A black thermoplastic medical grade elastomer with good fluid resistance, certified non-toxic by MEM elution test. It has USP Class VI Certificate of Compliance for biocompatibility and can be proc..
|
|||
| Drying Temperature | 82.0 °C | 180 °F | Desiccant drying for 3 hours recommended |
|
Advanced Elastomer Systems Santoprene® 251-80 Thermoplastic Rubber
(discontinued **)
A colorable thermoplastic flame retardant elastomer with good fluid resistance, formulated to replace thermoset elastomers such as EPDM, polychloroprene, and chlorosulfonated polyethylene. It can b..
|
|||
| Drying Temperature | 82.0 °C | 180 °F | Desiccant drying for 3 hours recommended |
|
Advanced Elastomer Systems Santoprene® 253-50 Thermoplastic Rubber
(discontinued **)
A colorable thermoplastic flame retardant elastomer with good fluid resistance, formulated to replace thermoset elastomers such as EPDM, polychloroprene, and chlorosulfonated polyethylene. It can b..
|
|||
| Drying Temperature | 82.0 °C | 180 °F | Desiccant drying for 3 hours recommended |
|
Advanced Elastomer Systems Santoprene® 281-73 Thermoplastic Rubber
(discontinued **)
A colorable thermoplastic medical grade elastomer with good fluid resistance, certified non-toxic by MEM elution test. It has USP Class VI Certificate of Compliance for biocompatibility and can be ..
|
|||
| Drying Temperature | 82.0 °C | 180 °F | Desiccant Dryer |
|
ExxonMobil Santoprene® 151-60 Thermoplastic Rubber
(discontinued **)
Description: A black thermoplastic flame retardant elastomer with good fluid resistance, formulated to replace thermoset elastomers such as EPDM, polychloroprene, and chlorosulfonated polyethylene. ..
|
|||
| Drying Temperature | 82.0 °C | 180 °F | Desiccant Dryer |
|
ExxonMobil Santoprene® 121-80M300 Thermoplastic Rubber
(discontinued **)
Description: A black thermoplastic high-flow elastomer for excellent injection molding performance with good fluid resistance, formulated to replace thermoset elastomers such as EPDM, polychloropren..
|
|||
| Drying Temperature | 82.0 °C | 180 °F | Desiccant Dryer |
|
Advanced Elastomer Systems Santoprene® 8281-75 Thermoplastic Rubber
(discontinued **)
Description: A colorable thermoplastic medical grade elastomer. It has USP Class VI Certificate of Compliance for biocompatibility and can be processed using injection molding, extrusion, or other ..
|
|||
| Drying Temperature | 82.0 °C | 180 °F | Desiccant drying for 3 hours recommended |
|
Advanced Elastomer Systems Trefsin® 3201-85 W305 Thermoplastic Rubber
(discontinued **)
A natural thermoplastic elastomer with excellent permeation resistance to water, air and other gases. It can be processed using injection molding, extrusion, blow molding or other melt processing t..
|
|||
| Drying Temperature | 82.0 °C | 180 °F | Desiccant drying for 3 hours recommended |
|
ExxonMobil Vyram™ 9271-85 Thermoplastic Rubber
(discontinued **)
A colorable thermoplastic elastomer which complies with FDA regulations for rubber articles intended for repeated use, as well as rubber articles in contact with non-fatty, non-oily foods as closure..
|
|||
| Drying Temperature | 82.0 - 93.0 °C | 180 - 199 °F | |
|
PolyOne Lubri-Tech™ PS-000/15T Polyester (PBT) - 15% PTFE Lubricated
(discontinued **)
Data provided by PolyOne.
|
|||
| Drying Temperature | 82.0 - 93.0 °C | 180 - 199 °F | |
|
PolyOne Lubri-Tech™ PS-000/15T-2S Polyester (PBT) - 15% PTFE Lubricated - 2% Silicone Lubricated
(discontinue
Data provided by PolyOne.
|
|||
| Drying Temperature | 82.0 - 104 °C | 180 - 219 °F | |
|
DSM Biomedical PurSil® 10 Thermoplastic Silicone Polyether Urethane
(discontinued **)
PurSil® thermoplastic siliconepolyether-urethane (TSPU) is a novel copolymer that is strong, yet flexible with proven biocompatibility and biostability. Leveraging the benefits of both silicone ela..
|
|||
| Drying Temperature | 82.0 °C | 180 °F | |
|
PolyOne Lubri-Tech™ ATH-000/20T Homopolymer Acetal - 20% PTFE Lubricated
(discontinued **)
Data provided by PolyOne.
|
|||
| Drying Temperature |
82.0
-
93.0
°C @Time 7200 sec |
180
-
199
°F @Time 2.00 hour |
|
|
Ineos ABS Lustran® 261 ABS, High-Impact Blending Grade
Lustran® ABS 261 resin is a natural, stiffer-flow, virgin blending grade of ABS (acrylonitrile butadiene styrene). It is designed for use with other high-impact ABS resins for drain, waste, and v..
|
|||
| Drying Temperature | 82.0 - 104 °C | 180 - 219 °F | |
|
Spartech PP5140 Talc Filled Homopolymer
Offers an excellent balance of processing improvement and high levels of stiffness and heat deflection temperatureInformation provided by Spartech
|
|||
| Drying Temperature | 82.0 - 85.0 °C | 180 - 185 °F | |
|
Styron MAGNUMâ„¢ 3325 SLG Acrylonitrile Butadiene Styrene (ABS) Resin
Overview: Super Low Gloss, Medium Heat, Medium Impact ABS resin for injection molded automotive interior trim applications Magnum 3325 SLG can achieve 60° Gardner gloss levels below 2.0 with low ..
|
|||
| Drying Temperature | 82.0 °C | 180 °F | |
|
Lubrizol Estane® 58123 Thermoplastic Polyurethane
Features: High moisture vapor transmission with low water swell and excellent low temperature and elasticity properties.Uses: Blown and flat die/cast film extrusion, injection molding and cable jack..
|
|||
| Drying Temperature | 82.0 °C | 180 °F | |
|
Lubrizol ESTANE® 58237 Ether Based Thermoplastic Polyurethane
Features: High moisture vapor transmission. Good physical properties and elasticity.Uses: Blown and flat die/cast film extrusion.Available in Americas, Europe, Middle East, Africa, India and AsiaInf..
|
|||
| Drying Temperature | 82.0 - 93.0 °C | 180 - 199 °F | air dew point <-40°C |
|
Lubrizol Estane® 2103-70A Thermoplastic Polyurethane Elastomer
Formerly PellethaneFeature: High MVTRAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by LubrizolLubrizol acquired the Pellethane product line from Dow in 2009.
|
|||
| Drying Temperature | 82.0 - 93.0 °C | 180 - 199 °F | air dew point <-40°C |
|
Lubrizol Estane® 2103-80AE Thermoplastic Polyurethane Elastomer
Formerly PellethaneAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by LubrizolLubrizol acquired the Pellethane product line from Dow in 2009.
|
|||
| Drying Temperature | 82.0 - 93.0 °C | 180 - 199 °F | air dew point <-40°C |
|
Lubrizol Estane® 2103-80AEN Thermoplastic Polyurethane Elastomer
Formerly PellethaneFeature: NSF Standard 61 certified, FDA complianceAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by LubrizolLubrizol acquired the Pellethane produ..
|
|||
| Drying Temperature | 82.0 - 93.0 °C | 180 - 199 °F | |
|
Lubrizol Estane® 2103-80PF Thermoplastic Polyurethane Elastomer
Formerly PellethaneFeature: Film and profile resinAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by LubrizolLubrizol acquired the Pellethane product line from Dow in..
|
|||
| Drying Temperature | 82.0 - 93.0 °C | 180 - 199 °F | air dew point <-40°C |
|
Lubrizol Estane® 2355-75A Thermoplastic Polyurethane Elastomer
Formerly PellethaneFeature: Memory and elasticity, Impact modificationAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by Lubrizol.Lubrizol acquired the Pellethane pro..
|
|||
| Drying Temperature | 82.0 °C | 180 °F | Desiccant drying for 3 hours recommended |
|
Advanced Elastomer Systems Santoprene® 181-73 Thermoplastic Rubber
(discontinued **)
A black thermoplastic medical grade elastomer with good fluid resistance, certified non-toxic by MEM elution test. It has USP Class VI Certificate of Compliance for biocompatibility and can be proc..
|
|||
| Drying Temperature | 82.0 - 104 °C | 180 - 219 °F | |
|
DSM Biomedical CarboSil® 10 90A Biocompatible Silicone Polycarbonate Urethane
(discontinued **)
Combines the biocompatibility and biostability of conventional silicone elastomers with the processability and toughness of thermoplastic urethane elastomers. Noncytotoxic and nonhemolytic. Low-En..
|
|||
| Drying Temperature | 82.0 °C | 180 °F | |
|
PolyOne Lubri-Tech™ AT-000/15T-2S Copolymer Acetal - 15% PTFE, 2% Silicone Lubricated
(discontinued **)
Data provided by PolyOne.
|
|||
| Drying Temperature | 82.0 - 93.0 °C | 180 - 199 °F | air dew point <-40°C |
|
Lubrizol Estane® 2103-80AEF Thermoplastic Polyurethane Elastomer
Formerly PellethaneFeature: Film resin for injection blow moldingAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by LubrizolLubrizol acquired the Pellethane product l..
|
|||
| Drying Temperature | 82.0 - 104 °C | 180 - 219 °F | Average value: 93.0 °C Grade Count:3 |
|
Overview of materials for Silicone Polyurethane, Ether Based
This property data is a summary of similar materials in the MatWeb database for the category "Silicone Polyurethane, Ether Based". Each property range of values reported is minimum and maximum value..
|
|||
| Drying Temperature | 82.0 °C | 180 °F | Desiccant drying for 3 hours recommended |
|
ExxonMobil Vyram™ 9271-75 Thermoplastic Rubber
(discontinued **)
A colorable thermoplastic elastomer which complies with FDA regulations for rubber articles intended for repeated use, as well as rubber articles in contact with non-fatty, non-oily foods as closure..
|
|||
Copyright © lookpolymers.com All Rights Reserved