- HOME
- POLYMER SEARCH
- Polymer Property : Cure Time = 15.0 min
Polymer Property : Cure Time = 15.0 min Product List
Processing PropertiesTips: 30 items are displayed at most.
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 15.0 - 30.0 min | 0.250 - 0.500 hour | working strength |
|
Permabond TA4300 Toughened Acrylic Adhesive
PERMABOND® TA4300 is a 2-part, 1:1 toughened acrylic adhesive. Its toughening makes it ideal for bonding dissimilar materials where differential thermal expansion and contraction could be an issue...
|
|||
| Cure Time |
15.0
-
60.0
min @Temperature 23.0 °C |
0.250
-
1.00
hour @Temperature 73.4 °F |
|
|
Humiseal 1C63 Silicone Conformal Coating
Humiseal 1C63 Silicone Conformal CoatingHigh temperature resistanceGood dielectrical propertiesGood moisture resistanceRepairableUL Approval PendingMIL-I-46058C Approval PendingPasses thermal shock ..
|
|||
| Cure Time |
15.0
min @Temperature 155 °C |
0.250
hour @Temperature 311 °F |
|
|
TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 60 PHR Non-Black, Mistron Vapor
Millathane® 76 is a very suitable choice for use in products such as bushings, small copier rolls; automotive applications — bumpers, o-rings, hydraulic seals, belts, gaskets, solid tires — and m..
|
|||
| Cure Time |
15.0
min @Temperature 149 °C |
0.250
hour @Temperature 300 °F |
|
|
TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, Hardness 30A, Black Sulfur Cure
Millathane® 76 is a very suitable choice for use in products such as bushings, small copier rolls; automotive applications — bumpers, o-rings, hydraulic seals, belts, gaskets, solid tires — and m..
|
|||
| Cure Time |
15.0
min @Temperature 160 °C |
0.250
hour @Temperature 320 °F |
|
|
TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, Hardness 50A, Non-Black Peroxide Cure
Millathane® 76 is a very suitable choice for use in products such as bushings, small copier rolls; automotive applications — bumpers, o-rings, hydraulic seals, belts, gaskets, solid tires — and m..
|
|||
| Cure Time |
15.0
min @Pressure 0.345 MPa, Temperature 121 °C |
0.250
hour @Pressure 50.0 psi, Temperature 250 °F |
Recommended Cure Cycle |
|
Arlon 19146R025 0.025" (0.635 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Cured Silicone RubberSubstrate: Style 1523 FiberglassSide 2: Uncured Silicone RubberInterleave: PolyethyleneAppearance: Black silicone gum and rubber on fiberglass clothT..
|
|||
| Cure Time |
15.0
min @Pressure 0.103 - 0.345 MPa, Temperature 121 °C |
0.250
hour @Pressure 15.0 - 50.0 psi, Temperature 250 °F |
|
|
Arlon 25188T010 Silicone Rubber/Laminated ETFE Film
Liner: 3 mil PTFE coated fiberglass; Side 1: uncured silicone rubber; Substrate: laminated ETFE film, treated for adhesion
|
|||
| Cure Time |
15.0
min @Pressure 0.345 MPa, Temperature 121 °C |
0.250
hour @Pressure 50.0 psi, Temperature 250 °F |
|
|
Arlon 32090R028 Silicone Rubber Laminate
The interleave is 3 mil polyethylene, side 1 is uncured silicone rubber and the carrier is PET.
|
|||
| Cure Time |
15.0
min @Pressure 0.345 MPa, Temperature 121 °C |
0.250
hour @Pressure 50.0 psi, Temperature 250 °F |
Recommended Cure Cycle |
|
Arlon 32140R062 0.062" (1.57 mm) Uncured Silicone Rubber on PET Carrier
Design/Construction: Interleave: PolyethyleneSide 1: Uncured Silicone RubberCarrier: PETAppearance: Red silicone gum on polymer release linerThis data represents typical values for the production ma..
|
|||
| Cure Time |
15.0
min @Pressure 0.345 MPa, Temperature 177 °C |
0.250
hour @Pressure 50.0 psi, Temperature 350 °F |
Recommended Cure Cycle |
|
Arlon 51586R015 0.015" (0.381 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction: Side 1: Cured Silicone RubberSubstrate: 7628 Style Fiberglass Side 2: Uncured Silicone Rubber Interleave: Polyethylene Appearance: Red silicone gum and rubber on fiberglass clot..
|
|||
| Cure Time |
15.0
min @Temperature 177 °C |
0.250
hour @Temperature 350 °F |
Recommended Cure Cycle; under pressure |
|
Arlon 55636R025 0.025" Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction:Interleave: 3 mil PESide 2: Uncured Silicone RubberSubstrate: Style 162 FiberglassSide 1: Cured Silicone RubberThis data represents typical values for the production material ..
|
|||
| Cure Time |
15.0
min @Pressure 0.345 MPa, Temperature 177 °C |
0.250
hour @Pressure 50.0 psi, Temperature 350 °F |
Recommended Cure Cycle |
|
Arlon P29514R015 0.0165" (0.419 mm) Semi-Cured Silicone Rubber with Fiberglass Substrate
Design/Construction: Side 1: Cured Self-Fusing Silicone RubberSubstrate: 7727 Style FiberglassProduct Advatages:Flexibility: Silicone rubber resists damage due to vibration, frame movement under loa..
|
|||
| Cure Time |
15.0
min @Pressure 0.689 MPa, Temperature 152 °C |
0.250
hour @Pressure 100 psi, Temperature 305 °F |
Recommended Cure Cycle |
|
Arlon R35121R063 0.063" (1.60 mm) Uncured Rubber with Fiberglass Substrate
Design/Construction:Side 1: Uncured RubberSide 2: Uncured Rubber This data Represents typical values for the production material. The data should not be used to write, or in place of, material speci..
|
|||
| Cure Time |
15.0
min @Pressure 0.345 MPa, Temperature 135 °C |
0.250
hour @Pressure 50.0 psi, Temperature 275 °F |
Recommended Cure Cycle |
|
Arlon R36029R028 0.028" (0.711 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction:Interleave: Polyethylene Layer 2: Uncured Silicone Rubber Layer 1: Cured Silicone Rubber Substrate: Style 7628 Fiberglass This data represents typical values for the production ..
|
|||
| Cure Time |
15.0
min @Temperature 141 °C |
0.250
hour @Temperature 285 °F |
Recommended Cure Cycle |
|
Arlon R36580N008 0.008" ((0.203 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass
Design/Construction: Liner: FEP Product: Uncured Silicone Rubber Carrier: PTFE Coated FiberglassAppearance: Grey silicone gumThis data represents typical values for the production material. The dat..
|
|||
| Cure Time |
15.0
min @Pressure 0.103 - 0.345 MPa, Temperature 121 °C |
0.250
hour @Pressure 15.0 - 50.0 psi, Temperature 250 °F |
Recommended Cure Cycle |
|
Arlon R37230R006 0.006" (0.152 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass Substrate
Design/Construction: Liner: FEP Add-on: Uncured Silicone Rubber Substrate: PTFE Coated Fiberglass This data represents typical values for the production material. The data should not be used to wri..
|
|||
| Cure Time |
15.0
min @Pressure 0.0689 - 0.345 MPa, Temperature 121 °C |
0.250
hour @Pressure 10.0 - 50.0 psi, Temperature 250 °F |
Recommended Cure Cycle |
|
Arlon Thermabond® 48781A008 0.008" (0.203 mm) Uncured Silicone Rubber with Fiberglass Substrate
Description: Generation II Thermabond® NP electrically insulating electronic adhesive. Bonds without primer.Design/Construction: Liner 1: PolyethyleneSide 1: Uncured Silicone RubberSubstrate: Style..
|
|||
| Cure Time |
15.0
min @Temperature 141 °C |
0.250
hour @Temperature 285 °F |
|
|
Arlon Thermabond® 99950N008 Silicone Rubber/Fiberglass Laminate
Electrically conductive, Thermabond®. primerless. Liner: 1 mil FEP; Product: uncured silicone rubber; Carrier: 3 mil PTFE coated fiberglass.
|
|||
| Cure Time |
15.0
min @Temperature 141 °C |
0.250
hour @Temperature 285 °F |
|
|
Arlon Thermabond® 99950N015 Silicone Rubber/Fiberglass Laminate
Electrically conductive, Thermabond®. primerless. Liner: 1 mil FEP; Product: uncured silicone rubber; Carrier: 3 mil PTFE coated fiberglass.
|
|||
| Cure Time |
15.0
min @Pressure 0.345 MPa, Temperature 121 °C |
0.250
hour @Pressure 50.0 psi, Temperature 250 °F |
Recommended Cure Cycle |
|
Arlon 32580R060 0.060" (1.52 mm) Uncured Silicone Rubber on PET Carrier
Design/Construction: Interleave: PolyethyleneSide 1: Uncured Silicone RubberCarrier: PETAppearance: Red silicone gum on polymer linerThis data represents typical values for the production material. ..
|
|||
| Cure Time |
15.0
min @Pressure 0.345 MPa, Temperature 121 °C |
0.250
hour @Pressure 50.0 psi, Temperature 250 °F |
Recommended Cure Cycle |
|
Arlon 55279R055 0.055" (1.40 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction: Interleave: Polyethylene Layer 2: Uncured Silicone Rubber Layer 1: Cured Silicone Rubber Substrate: Style 162 Fiberglass Product Use: Flexible heater insulationAppearance: Red s..
|
|||
| Cure Time |
15.0
min @Pressure 0.345 MPa, Temperature 177 °C |
0.250
hour @Pressure 50.0 psi, Temperature 350 °F |
Recommended Cure Cycle |
|
Arlon 55571R028 0.028" (0.711 mm) Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Uncured Silicone RubberSide 2: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place ..
|
|||
| Cure Time |
15.0
min @Pressure 0.345 MPa, Temperature 121 °C |
0.250
hour @Pressure 50.0 psi, Temperature 250 °F |
Recommended Cure Cycle |
|
Arlon 56866R026 0.028" Cured/Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Cured Silicone RubberSubstrate: Style 1564 FiberglassSide 2: Uncured Silicone RubberInterleave: 3 mil LDPEThis data represents typical values for the production mater..
|
|||
| Cure Time |
15.0
min @Temperature 155 °C |
0.250
hour @Temperature 311 °F |
|
|
TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 40 PHR Non-Black, Mistron Vapor
Millathane® 76 is a very suitable choice for use in products such as bushings, small copier rolls; automotive applications — bumpers, o-rings, hydraulic seals, belts, gaskets, solid tires — and m..
|
|||
| Cure Time |
15.0
min @Temperature 155 °C |
0.250
hour @Temperature 311 °F |
|
|
TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, Hardness 90A, Black Peroxide Cure
Millathane® 76 is a very suitable choice for use in products such as bushings, small copier rolls; automotive applications — bumpers, o-rings, hydraulic seals, belts, gaskets, solid tires — and m..
|
|||
| Cure Time |
15.0
min @Pressure 0.345 MPa, Temperature 121 °C |
0.250
hour @Pressure 50.0 psi, Temperature 250 °F |
Recommended Cure Cycle |
|
Arlon R37503G060 0.060" Uncured Fluorosilicone on Release PET Carrier
Design/Construction:Interleave: 0.003" PolyethyleneSide 1: Uncured FluorosiliconeCarrier: 0.005" Release PETThis data represents typical values for the production material and should not be used ..
|
|||
Copyright © lookpolymers.com All Rights Reserved