Polymer Property : Cure Time = 4.00 hour Product List

Processing Properties

Tips: 30 items are displayed at most.

Processing Properties	Metric	English	Comments
Cure Time	240 min	4.00 hour	On steel (fixture)
ND Industries 440 High pressure Sealant Pneumatic and hydraulic sealant fluid, for power and gas system connections
Cure Time	240 min	4.00 hour	On steel (Fixture)
ND Industries 730 Gasket Maker Aluminum Flange Surfaces Flexible Parts
Cure Time	240 min	4.00 hour
Lord Adhesives 510 Fast Cure Acrylic Adhesive Lord 500 SeriesLord 500 Series Acrylic Adhesives bond plastics and prepared metals; they offer excellent adhesion to both thermoplastics and thermoset plastics. They are available with varying handi..
Cure Time	240 min	4.00 hour	Fixture time
ITW Devcon Safety Clear Coatâ„¢ Epoxy, Water Clear Information provided by ITW Devcon
Cure Time	240 min @Temperature 200 Â°C	4.00 hour @Temperature 392 Â°F	Post
Shin-Etsu Silicones SV-15000U Silicone Rubber SV15000U is one of a series of easy processing, no post cure silicone rubber bases. It can be used in a variety of applications requiring finishing by molding, extruding or calendering. Product Feat..
Cure Time	240 min @Temperature 200 Â°C	4.00 hour @Temperature 392 Â°F	Post
Shin-Etsu Silicones KE-951U Silicone Elastomer KE951 U is one of a series of easy processing, general purpose silicone rubber bases. It can be used in a variety of applications requiring finishing by molding (compression, injection, transfer).Pr..
Cure Time	240 - 360 min @Temperature 23.0 °C	4.00 - 6.00 hour @Temperature 73.4 °F
Master Bond EP51HT Fast Curing High Temperature Resistant Epoxy Adhesive Master Bond Polymer Adhesive EP51HT represents a significant advance in epoxy adhesive technology featuring an excellent balance of performance properties, including convenient curing at ambient tem..
Cure Time	240 - 1440 min	4.00 - 24.0 hour	Full Cure; Unprimed
Loctite® Gasket Eliminator® 518 Flange Sealant Anaerobic GasketingLoctite® 518 Flexible Cure Gasket Eliminator® Flange SealantForms a flexible, solvent-resistance seal that will not tear or decay. Seals to 300ºF and fills gaps to 0.050". Can..
Cure Time	240 - 360 min @Temperature 121 °C	4.00 - 6.00 hour @Temperature 250 °F
Cotronics Duralco™ 4703 Adhesive and Tooling Compound High temperature resin reinforced with ceramic and metallic fibers and particles, resulting in high thermal stability. Easily machined to close tolerances and will repair and rebuild worn or cracke..
Cure Time	240 min	4.00 hour	Tack-Free Time
3M AC-251 Black Class B-1/2 Aerospace Sealant 3M Aerospace Sealant AC-251 Black Class B are two-part, quick curing, polysulfide based canopy and windshield sealants. These products are formulated for sealing acrylic, glass, and polycarbonate ai..
Cure Time	240 min	4.00 hour
3M AC-251 Gray Class B-1/2 Aerospace Sealant 3M Aerospace Sealant AC-251 Gray Class B are two-part, quick curing, polysulfide based canopy and windshield sealants. These products are formulated for sealing acrylic, glass, and polycarbonate air..
Cure Time	240 - 360 min	4.00 - 6.00 hour	Tack Free Time, catalyzed with QM CAT PURPLE
ACC QM 122 QSI Quantum Silicones 22 Durometer Condensation Cured Moldmaking Material QM 122 is a two-component, room temperature condensation cure silicone material. The cured rubber is flexible with excellent mechanical and physical properties in addition to good shelf-life stabili..
Cure Time	240 - 360 min	4.00 - 6.00 hour	Tack Free Time, catalyzed with QM CAT PURPLE
ACC QM128 QSI Quantum Silicones 28 Durometer Condensation Cured Moldmaking Material QM 128 is a two-component, room temperature condensation cure silicone material. The cured rubber has excellent mechanical properties and shelf-life stability. This material is an excellent choice f..
Cure Time	240 min	4.00 hour	Time to Handling Strength
3M Scotch-Weld™ DP620NS Structural Adhesive 3M™ Scotch-Weld™ Urethane Adhesive DP-620NS is a back, long working time, two-component polyurethane. Formulated as 1:1 ratio liquids. With the squeeze of the trigger, or with automated dispensing..
Cure Time	240 min	4.00 hour	Touch Dry
3M Scotchkote™ 162PWX Epoxy Coating 3M Scotchkote Epoxy Coating 162PWX is a 100% solid two-part epoxy coating that has been specifically developed for the long term protection of drinking water pipelines, storage and process tanks or ..
Cure Time	240 min	4.00 hour	Tack free time, catalyzed, DBT Catalyst
ACC QSil 40 QSI Quantum Silicones 40 Durometer Condensation Cure for Potting QSil 40 is a general purpose two-part, room temperature, condensation cure siloxane elastomer. The two applicable catalysts are 0.5% DBT by weight and 10% Deep Section Catalyst by weight. Cure speed..
Cure Time	240 - 1440 min	4.00 - 24.0 hour	Full cure
3M Scotch-Weld™ DP825 Acrylic Adhesives 3M™ Scotch-Weld™ Acrylic Adhesive DP825 is a two-part, 1:1 mix ratio, toughened acrylic structural adhesives. They exhibit excellent shear and peel strengths along with good impact, durability and..
Cure Time	240 min	4.00 hour	Tack-Free Time
3M AC-730 Class B-1/2 Aerospace Sealant 3M Aerospace Sealant AC-730 Class B are fast cure, two-part, manganese-cured, non-chromate containing corrosion inhabiting sealants. These Sealants provide an effective barrier against the common ca..