Polymer Property : Cure Time = 45.0 min Product List

Processing Properties

Tips: 30 items are displayed at most.

Processing Properties	Metric	English	Comments
Cure Time	45.0 min @Temperature 150 °C	0.750 hour @Temperature 302 °F
Permabond ES558 Epoxy Resin PERMABOND ES558 is a single-part epoxy paste which flows like solder when heated during curing. The adhesive is toughened for maximum impact resistance, along with excellent peel and shear strength...
Cure Time	45.0 min @Temperature 120 °C	0.750 hour @Temperature 248 °F	Oven
Permabond ES562 Epoxy Resin PERMABOND® ES562 is a single-part epoxy adhesive which flows like solder when heated during curing. The adhesive has excellent adhesion to metal surfaces and composites. The high bond strength of t..
Cure Time	45.0 min @Temperature 152 °C	0.750 hour @Temperature 305 °F
TSE Industries Millathane® 5004 Millable Polyurethane Elastomer with 3 PHR Di-Cup 40C MILLATHANE 5004 is a millable polyurethane elastomer having excellent processing characteristics. MILLATHANE 5004 stocks can be readily processed on conventional rubber equipment. Vulcanization is c..
Cure Time	45.0 min @Temperature 152 °C	0.750 hour @Temperature 305 °F
TSE Industries Millathane® 5004 Millable Polyurethane Elastomer, 305ºF Cure Temperature MILLATHANE 5004 is a millable polyurethane elastomer having excellent processing characteristics. MILLATHANE 5004 stocks can be readily processed on conventional rubber equipment. Vulcanization is c..
Cure Time	45.0 min @Temperature 150 °C	0.750 hour @Temperature 302 °F	Oven
Permabond ES569 Epoxy Resin PERMABOND® ES569 is a single-part heat cured epoxy adhesive with excellent adhesion to metal surfaces as well as composite materials. The high bond strength of this adhesive allows it to replace me..
Cure Time	45.0 - 45.0 min @Temperature 100 - 100 °C	0.750 - 0.750 hour @Temperature 212 - 212 °F	Average value: 45.0 min Grade Count:1
Overview of materials for Silicone Foam This property data is a summary of similar materials in the MatWeb database for the category "Silicone Foam". Each property range of values reported is minimum and maximum values of appropriate MatW..
Cure Time	45.0 - 60.0 min @Temperature 60.0 Â°C	0.750 - 1.00 hour @Temperature 140 Â°F	Full cure in 45 to 60 mins at 140Â°F.
Fibre Glast 1101 High-Strength General Purpose Epoxy Adhesive Description:#1101 is a light grayish-tan two part epoxy adhesive that was developed especially for difficult bonding problems involving similar or dissimilar materials. #1101 provides excellent adhe..
Cure Time	45.0 min	0.750 hour	Tack-free
Momentive Performance Materials RTV5249 Neutral Cure, One Component RTV Adhesive Sealant RTV5240 series sealants are alkoxy neutral cure, one-component, ready to use, electronic grade silicone adhesive sealants exhibiting high strength that will maintain a strong bond even when exposed ..
Cure Time	45.0 min @Temperature 152 °C	0.750 hour @Temperature 305 °F
TSE Industries Millathane® 5004 Millable Polyurethane Elastomer with 3 PHR Di-Cup 40C MILLATHANE 5004 is a millable polyurethane elastomer having excellent processing characteristics. MILLATHANE 5004 stocks can be readily processed on conventional rubber equipment. Vulcanization is c..
Cure Time	45.0 min @Temperature 152 °C	0.750 hour @Temperature 305 °F
TSE Industries Millathane® 5004 Millable Polyurethane Elastomer with 8 PHR Di-Cup 40C MILLATHANE 5004 is a millable polyurethane elastomer having excellent processing characteristics. MILLATHANE 5004 stocks can be readily processed on conventional rubber equipment. Vulcanization is c..
Cure Time	45.0 min @Temperature 125 °C	0.750 hour @Temperature 257 °F
Dow Corning SE 4445 CV KIT Two-part, grey, 1:1, addition cure gel, good thermal conductivity, controlled volatility, UL V-0.Information provided by Dow Corning
Cure Time	45.0 min @Temperature 25.0 °C	0.750 hour @Temperature 77.0 °F	Full Chemical
Chesterton ARC 5ES Rapid Repair Stick Description: ARC 5ES is specifically formulated for quick reliable repairs. Its “stick” design combines the performance of a two component system with the convenience of a single component. The AR..
Cure Time	>= 45.0 min	>= 0.750 hour	Tack Free Time
ACC EP AEP EPI Engineered Polymers EP AEP is a new generation of Internetwork Polymers of polyurea and Epoxy, “Powered by Reactamine® Technology”. EP AEP was developed for a colorfast floor for both residential and industrial appl..
Cure Time	45.0 min @Temperature 249 °C	0.750 hour @Temperature 480 °F
Aremco Corr-Paint™ CP4000-S1 High Temperature Protective Coating, Silicone
Cure Time	45.0 min @Temperature 249 °C	0.750 hour @Temperature 480 °F
Aremco Corr-Paint™ CP4010S High Temperature Protective Coating Silicone-Polyester
Cure Time	45.0 min @Temperature 249 °C	0.750 hour @Temperature 480 °F
Aremco Corr-Paint™ CP4010-S1 High Temperature Protective Coating, Silicone
Cure Time	45.0 min @Temperature 232 °C	0.750 hour @Temperature 450 °F	Adequate ventilation is required when curing these products. Outgassing will occur above 300°F and cease after 750°F. An additional 30 minutes is required at the highest service temperature if service temperature is below 750°F.
Aremco Corr-Paint™ CP4050 High Temperature Protective Coating Silicone Low viscosity, green coating for power resistors to 1100°F (593°C)
Cure Time	45.0 min @Temperature 249 °C	0.750 hour @Temperature 480 °F
Aremco Corr-Paint™ CP4070-S1 High Temperature Protective Coating, Silicone
Cure Time	45.0 min @Temperature 249 °C	0.750 hour @Temperature 480 °F
Aremco Corr-Paint™ CP4080-S1 High Temperature Protective Coating, Silicone
Cure Time	45.0 min @Temperature 249 °C	0.750 hour @Temperature 480 °F
Aremco Corr-Paint™ CP4090 High Temperature Protective Coating Silicone, Aluminum Filled This silicone-based, heat resistant coatings are formulated using a state-of-the-art, VOC-compliant, water-dispersible silicone resin. CP4000 adheres to metals, ceramics, refractories, and quartz, a..
Cure Time	45.0 min @Temperature 249 °C	0.750 hour @Temperature 480 °F
Aremco Corr-Paint™ CP4090-S1 High Temperature Protective Coating, Silicone
Cure Time	45.0 min @Temperature 232 °C	0.750 hour @Temperature 450 °F	Adequate ventilation is required when curing these products. Outgassing will occur above 300°F and cease after 750°F. An additional 30 minutes is required at the highest service temperature if service temperature is below 750°F.
Aremco Aremco-Seal™ 4030 High Temperature Specialty Coatings Silicone, Ceramic Filled Translucent-white, low-viscosity sealer for porous materials to 900°F (482°C)
Cure Time	45.0 min @Temperature 249 °C	0.750 hour @Temperature 480 °F
Aremco Corr-Paint™ CP4020-S1 High Temperature Protective Coating, Silicone
Cure Time	45.0 min @Temperature 249 °C	0.750 hour @Temperature 480 °F
Aremco Corr-Paint™ CP4040-S1 High Temperature Protective Coating, Silicone
Cure Time	45.0 min @Temperature 249 °C	0.750 hour @Temperature 480 °F
Aremco Corr-Paint™ CP4090-S High Temperature Protective Coating, Silicone-Polyester
Cure Time	45.0 min @Temperature 249 °C	0.750 hour @Temperature 480 °F
Aremco Corr-Paint™ CP4095 High Temperature Protective Coating Silicone, Aluminum Filled This silicone-based, heat resistant coatings are formulated using a state-of-the-art, VOC-compliant, water-dispersible silicone resin. CP4000 adheres to metals, ceramics, refractories, and quartz, a..
Cure Time	45.0 min @Temperature 249 °C	0.750 hour @Temperature 480 °F
Aremco Corr-Paint™ CP4095-S1 High Temperature Protective Coating, Silicone
Cure Time	45.0 min @Temperature 152 °C	0.750 hour @Temperature 305 °F
TSE Industries Millathane® 5004 Millable Polyurethane Elastomer, Hardness 70A MILLATHANE 5004 is a millable polyurethane elastomer having excellent processing characteristics. MILLATHANE 5004 stocks can be readily processed on conventional rubber equipment. Vulcanization is c..
Cure Time	45.0 min @Temperature 152 °C	0.750 hour @Temperature 305 °F
TSE Industries Millathane® 5004 Millable Polyurethane Elastomer with 5 PHR Di-Cup 40C MILLATHANE 5004 is a millable polyurethane elastomer having excellent processing characteristics. MILLATHANE 5004 stocks can be readily processed on conventional rubber equipment. Vulcanization is c..