Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melt Temperature = 250 °C Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Processing Properties Metric English Comments
Melt Temperature 200 - 250 °C
392 - 482 °F
Plastcom SLOVALEN PC 18 FRT 5 PP, mod. of mech. properties, fire retardant
FeaturesModified copolymer PP for extrusion, contains the modifier of mechanical properties and non halogen and free phosphor flame retardant. Delivered in natural mode and in the full RAL colour sc..
Melt Temperature 200 - 250 °C
392 - 482 °F
Plastcom SLOVALEN PC 52 T 20 Polypropylene Copolymer, 20% Micronized Talc
FeaturesModified copolymer PP for injection moulding with the content of 20% micronized, floated, chemically modified talc. General application - packing material, garden flower-pots, toys, furnitu..
Melt Temperature 200 - 250 °C
392 - 482 °F
Plastcom SLOVALEN PC 71 T 10 PP, 10% mineral filling
FeaturesModified copolymer PP for injection moulding with the content of 10% mineral filling. Increased rigidity, strength and thermal use up to 130°C depending on the talc content. Decr eased shri..
Melt Temperature 200 - 250 °C
392 - 482 °F
Plastcom SLOVALEN PC 71 T 15 PP, 15% mineral filling
FeaturesModified PP for injection moulding with the content of 15% mineral filling. Increased rigidity, strength and thermal. Decreased shrinkage. General application in all industry branches - pack..
Melt Temperature 200 - 250 °C
392 - 482 °F
Plastcom SLOVALEN PC 88 FRD 1 Polypropylene Copolymer, Halogen Flame Retardant, UV Stabilized
FeaturesModified copolymer PP with the possibility of changing the MFI within the interval 5 - 20 g/10min. Stabilized against the UV-radiation by the UV stabilizer on the HALS basis. Retarded with..
Melt Temperature 200 - 250 °C
392 - 482 °F
Plastcom SLOVALEN PH 49 GF 10 GB 20 PP, 20% glass beads, 10% glass fibre, coupling agent
FeaturesModified homopolymer PP for injection moulding, chemically reinforced with 10 % glass fiber and 20% glass beads, contains themodifier of mechanical properties. Increased strength in comparis..
Melt Temperature 200 - 250 °C
392 - 482 °F
Plastcom SLOVALEN PH 78 T 40 PP, 40% mineral filling
FeaturesModified homopolymer PP for injection moulding with the content of 40% microground, floated, chemically modified talc. Stable towards detergents. General application in all industry branches..
Melt Temperature 200 - 250 °C
392 - 482 °F
Plastcom SLOVALEN PH 99 GB 20 PP, 20% glass beads, mod. of mech. prop.
FeaturesModified homopolymer PP for injection moulding, chemically reinforced with 20% glass beads, contains the modifier of mechanical properties. Increased strength in comparison with unfilled PP...
Melt Temperature 225 - 250 °C
437 - 482 °F
PolyOne OnFlex™ BIO 5170D-E0010 Thermoplastic Elastomer (TPE)
OnFlex™ BIO 5100 series thermoplastic elastomer compounds are glass reinforced thermoplastic polyurethane compounds made from renewable natural sources. These compounds contain at least 20% renewab..
Melt Temperature 200 - 250 °C
392 - 482 °F
Premix Thermoplastics PRE-ELEC® PP 1375
PRE-ELEC PP 1375 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELE..
Melt Temperature 220 - 250 °C
428 - 482 °F
NOVA Chemicals Sclair® 51-35BP HDPE Extrusion Resin
Features: Medium molecular weight, excellent ESCR, excellent toughness, good processability, good chemical resistance.Applications: Extrusion on to metal pipes to produce a corrosion resistant coati..
Melt Temperature 200 - 250 °C
392 - 482 °F
Plastcom SLOVALEN PC 53 N Polypropylene Copolymer, UV Stabilization
FeaturesModified copolymer PP for injection moulding, with the ability of modeling the melt flow rate within the interval 5 - 20 g/10 min. Can be used for simple small as well as for large complica..
Melt Temperature 200 - 250 °C
392 - 482 °F
Plastcom SLOVALEN PH 41 GF 10 Polypropylene Homopolymer, 10% Glass Fiber
FeaturesModified homopolymer PP for injection moulding, chemically reinforced with 10% glass fiber, with high strength, rigidity and toughness, adapted thermal properties, decreased shrinkage. Suit..
Melt Temperature 220 - 250 °C
428 - 482 °F
Start Point: 240°C
Kingfa HR-528 Modified ABS
Features:UL94 HB @ 1.5-3.2mmExcellent heat resistanceApplications:Automobile partsAutomobile audioDashboard, interior trimAutomobile lamp, mirrorInformation Provided by Kingfa Sci. & Tech. Co., Ltd...
Melt Temperature 220 - 250 °C
428 - 482 °F
LG Chemical HI-121 ABS, High Impact
Feature: Injection Molding, Well Balanced Mechanical PropertiesApplication: Electric & Electronic Products, Miscellaneous GoodsCAS No. 9003-56-9Information Provided by LG Chem
Melt Temperature 200 - 250 °C
392 - 482 °F
Extrusion Molding
LG Chemical LG713 ABS, Low Gloss
Feature: Extrusion Molding, Low Gloss, ExtrusionApplication: Automotive Interior Housing (Cover Etc)CAS No. 25120-20-1, 9003-56-9 and 31621-07-5Information provided by LG Chemical
Melt Temperature 220 - 250 °C
428 - 482 °F
LG Chemical LI-921 ASA, Extrusion, High Stiffness
Information Provided by LG Chem
Melt Temperature 215 - 250 °C
419 - 482 °F
Injection Molding
LG Chemical LUMID GP1300AP PA6, Plasticized
Feature: Injection Molding, PA6, PlasticizedApplication: Automotive PartsInformation provided by LG Chemical
Melt Temperature 230 - 250 °C
446 - 482 °F
Injection Molding
LG Chemical LUMID HI5003A PA6/PO, High Impact, High Flow, Good Paintablility
Feature: Injection Molding, PA6/PO, High Impact, High Flow, Good PaintablilityApplication: Automotive Exterior PartsCAS No. 25038-54-4, 9010-79-1, 9003-07-0 and 14807-96-6Information provided by LG ..
Melt Temperature 210 - 250 °C
410 - 482 °F
Injection
Inno-Comp INNOPOL® CS 3-9120 SR5 17% Talc Filled Polypropylene Blend
INNOPOL® CS 3-9120 SR5 is a 17% talc-filled compound based on blend of polypropylene block copolymer and homopolymer. This grade is available in natural and custom colored form.INNOPOL® CS 3-9..
Melt Temperature 240 - 250 °C
464 - 482 °F
LATI Latamid 6 H2 G/30-V2HF PA 6, 30% Glass Fiber Reinforced, Heat Stabilized, Flame Retardant
Polyamide 6 (PA6) based compound. Heat stabilized. Glass fibers. UL94 V-2 classified, halogens-based flame retardants and red phosphorous freeAvailability: Africa & Middle East; Asia Pacific; Europe..
Melt Temperature 230 - 250 °C
446 - 482 °F
LATI Latilub 62-15ST PA6
Self-lubricating product based on Polyamide 6 (PA6). Silicone / PTFE.Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Industria Term..
Melt Temperature 190 - 250 °C
374 - 482 °F
Suzhou Hipro Polymers Hiprolon® 11ESNNHL P40 Nylon, conditioned
Hiprolon® 11ESNNHL P40 long chain polyamide compound contains a bio-renewable resource. It features low density, low water absorbing, high dimension stability and heat stability, high cold impact..
Melt Temperature 240 - 250 °C
464 - 482 °F
Eurostar Staramide P1000J5 PA6, Impact Modified, Injection Molded
Staramide P1000J5 is a Low Temperature Impact Modified, Polyamide 6 Injection Molding ResinInformation provided by Eurostar.
Melt Temperature 225 - 250 °C
437 - 482 °F
Eurostar Starpylen MF008S PP, 40% Glass Fiber Filled, Injection Molded
Starpylen MF008S is a 40% Glass Fiber Reinforced Polypropylene Injection Molding ResinInformation provided by Eurostar.
Melt Temperature 225 - 250 °C
437 - 482 °F
Eurostar Starpylen MX05038 TPEX, Injection Molded
Starpylen MX05038 is a TPEX Injection Molding ResinInformation provided by Eurostar.
Melt Temperature 225 - 250 °C
437 - 482 °F
Eurostar Starpylen MX05039 PP, Mineral Filled, Injection Molding
Starpylen MX05039 is a Mineral Filled Polypropylene Injection Molding ResinInformation provided by Eurostar.
Melt Temperature 240 - 250 °C
464 - 482 °F
Eurostar Staramide BST44 PA6, Impact Modified, Injection Molded
BST44 is a Low Temperature Impact Modified Polyamide 6 Injection Molding ResinInformation provided by Polymer Technology & Services, the North American exclusive supplier.
Melt Temperature 220 - 250 °C
428 - 482 °F
Injection Molding
LG Chemical KEYFLEX BT S5035 Ester Type TPE
Description: Injection Molding, TPC-ET, Airbag Cover Deployment, Medium Modulus, Black ColorApplication: Airbag Cover (DAB, PAB, KAB, SAB)CAS: 37282-12-5, 24968-12-5 and 1333-86-4Information provide..
Melt Temperature 200 - 250 °C
392 - 482 °F
Injection Molding
Polimeri Europa Edistir N 1910 Polystyrene
Very easy flow general purpose polystyrene. Used for injection of thin-wall, multi-cavity, very fast-cycle mouldings and for sheet extrusion in glossy capping of HIPS and in blend with HIPS or clear..
Copyright © lookpolymers.com All Rights Reserved