- HOME
- POLYMER SEARCH
- Polymer Property : Melt Temperature = 290 °C
Polymer Property : Melt Temperature = 290 °C Product List
Processing PropertiesTips: 30 items are displayed at most.
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 290 °C | 554 °F | DAM; Optimum |
|
DuPont Performance Polymers Zytel® 103FHS BKB009 Nylon 66
(Unverified Data**)
Zytel® 103FHS BKB009 is a heat stabilized, internally lubricated polyamide 66 resin for injection molding. It was developed for fast cycles and high productivity.Information provided by DuPont Perf..
|
|||
| Melt Temperature | 290 °C | 554 °F | DAM; Optimum |
|
DuPont Performance Polymers Zytel® 103FHS BKB038 Nylon 66
(Unverified Data**)
Zytel® 103FHS BKB038 is a heat stabilized, lubricated, PA 66 resin for fast cycling.Information provided by DuPont Performance Polymers
|
|||
| Melt Temperature | 290 °C | 554 °F | DAM; Optimum |
|
DuPont Performance Polymers Zytel® E41HSB NC010 Nylon 66
(Unverified Data**)
Zytel® E41HSB is an unreinforced, high viscosity, heat stabilized polyamide 66 for injection molding and extrusion.Information provided by DuPont Performance Polymers
|
|||
| Melt Temperature | 290 - 310 °C | 554 - 590 °F | Injection Molding |
|
LG Chemical LUCON CP6080LP PC+CNT+GF
Description: Injection Molding, PC+CNT+GF, Electrostatic Dissipation, Low Surface TribochargeApplication: ATM parts, HDD BracketCAS No. 103598-77-2, 65997-17-3 and 7782-42-5Information provided by L..
|
|||
| Melt Temperature | 290 °C | 554 °F | for test specimens; ISO 294 |
|
Lanxess Durethan® AKV 35 CX H2.0 900876 Nylon 66, Glass Fiber Reinforced
PA 66, 35% glass fibers, injection molding, heat-aging stabilizedInformation provided by LANXESS.
|
|||
| Melt Temperature | 290 - 320 °C | 554 - 608 °F | |
|
LATI Lasulf PSU
Polysulfone (PSU). Unfilled. Low smoke density and low toxicity index. Very high dimensional stability.Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformati..
|
|||
| Melt Temperature | 290 - 310 °C | 554 - 590 °F | |
|
LATI Larton K/30 PPS, 30% Carbon Fiber Reinforced
Polyphenylene Sulfide (PPS) based compound. Carbon fiber. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.Availability: Africa & Middle East; As..
|
|||
| Melt Temperature | 290 - 310 °C | 554 - 590 °F | |
|
A. Schulman SCHULAMID® 66 GF33H 33% Glass Fiber Reinforced, Heat Stabilized Nylon 66
Information provided by A. Schulman.
|
|||
| Melt Temperature | 290 - 310 °C | 554 - 590 °F | |
|
A. Schulman SCHULAMID® 66 GF33H 33% Glass Fiber Reinforced, Heat Stabilized Nylon 66
Information provided by A. Schulman.
|
|||
| Melt Temperature | 290 - 310 °C | 554 - 590 °F | |
|
A. Schulman SCHULAMID® 66 GF13 13% Glass Fiber Reinforced Nylon 66
Information provided by A. Schulman.
|
|||
| Melt Temperature | 290 - 310 °C | 554 - 590 °F | |
|
A. Schulman SCHULAMID® 66 GF30H 30% Glass Fiber Reinforced, Heat Stabilized Nylon 66
Information provided by A. Schulman.
|
|||
| Melt Temperature | 290 - 310 °C | 554 - 590 °F | |
|
A. Schulman SCHULAMID® 66 GF33H 33% Glass Fiber Reinforced, Heat Stabilized Nylon 66
Information provided by A. Schulman.
|
|||
| Melt Temperature | 290 - 310 °C | 554 - 590 °F | |
|
A. Schulman SCHULAMID® 66 GF13 13% Glass Fiber Reinforced Nylon 66
Information provided by A. Schulman.
|
|||
| Melt Temperature | 290 - 310 °C | 554 - 590 °F | |
|
A. Schulman SCHULAMID® 66 GF40H 40% Glass Fiber Reinforced, Heat Stabilized Nylon 66
Information provided by A. Schulman.
|
|||
| Melt Temperature | 290 - 310 °C | 554 - 590 °F | |
|
A. Schulman SCHULAMID® 66 MK4015H 40% Glass Fiber/Mineral Reinforced, Heat Stabilized Nylon 66
Information provided by A. Schulman.
|
|||
| Melt Temperature | 290 - 310 °C | 554 - 590 °F | |
|
A. Schulman SCHULAMID® 66 MK4015 40% Glass Fiber/Mineral Reinforced 66
Information provided by A. Schulman.
|
|||
| Melt Temperature | 290 - 310 °C | 554 - 590 °F | |
|
A. Schulman SCHULAMID® 66 MK4015H 40% Glass Fiber/Mineral Reinforced, Heat Stabilized Nylon 66
Information provided by A. Schulman.
|
|||
| Melt Temperature | 290 - 310 °C | 554 - 590 °F | |
|
A. Schulman SCHULAMID® 66 GF50H 50% Glass Fiber Reinforced, Heat Stabilized 66
Information provided by A. Schulman.
|
|||
| Melt Temperature | 290 °C | 554 °F | Injection Molding; ISO 294 |
|
Covestro Makrolon® 1837* Polycarbonate, Impact Grade
ISO 7391-PC,MP,(,,)-09-9Global gradeFormerly Makrolon DP1-1837MVR (300 °C/1.2 kg) 11 cm3/10 minImpact modifiedMedium viscosityEasy releaseInjection molding - Melt temperature 280 - 320 °CAvailable..
|
|||
| Melt Temperature | 290 °C | 554 °F | Injection Molding; ISO 294 |
|
Covestro Makrolon® 2556 Polycarbonate
MVR (300 °C/1.2 kg) 14 cm3/10 minEasy releaseGood hydrolysis resistanceInjection moldingAvailable in transparentTranslucent and opaque colorsFood contact gradePreprocessingMax. Water content
|
|||
| Melt Temperature | 290 °C | 554 °F | Injection Molding; ISO 294 |
|
Covestro Makrolon® 2656 Polycarbonate
ISO 7391-PC,MR,(,,)-18-9Global gradeMVR (300 °C/1.2 kg) 12.5 cm3/10 minFood contact qualityMedium viscosityEasy releaseGood hydrolysis resistanceInjection molding - Melt temperature 280 - 320 °CAv..
|
|||
| Melt Temperature | 290 °C | 554 °F | Injection Molding; ISO 294 |
|
Covestro Makrolon® 6357 Polycarbonate, Flame Retardant Grade
ISO 7391-PC,MFLR,(,,)-18-9MVR (300 °C/1.2 kg) 14.5 cm3/10 minChlorine- and bromine-free flame retardantUL 94V-0/3.0 mmMedium viscosityUV stabilizedEasy releaseInjection molding - Melt temperature 2..
|
|||
| Melt Temperature | 290 - 310 °C | 554 - 590 °F | |
|
Akro-Plastic Akroloy® PA GF 40 (2845) PA 6.6 & PA6I/6T Dry, 40% Glass Filled
One of the most characteristic properties of polyamide (PA 6.6) is the absorption of moisture. This essentially leads to increased toughness and elongation at break, to name the most important param..
|
|||
| Melt Temperature | 290 - 310 °C | 554 - 590 °F | Injection-molding/Extrusion |
|
BASF Ultramid® A3EG10 50% Glass Filled PA66 (Conditioned)
Description: 50% glass-fiber reinforced injection-molding grade for technical articles of very high stiffness as well as for electric insulating parts.Information provided by BASF
|
|||
| Melt Temperature | 290 °C | 554 °F | Optimal |
|
BASF Ultramid® A3Z BK 30464 PA66 (Conditioned)
Description: Impact-modified and stabilized injection- molding grade for components and housings with good low temperature impact resistance.Information provided by BASF
|
|||
| Melt Temperature | 290 °C | 554 °F | Optimal |
|
BASF Ultramid® B35EG3 15% Glass Filled PA6 (Conditioned)
Description: 15% glass-fiber reinforced injection-molding grade for gIT applications such as, for example, steering column switches, vehicle mirror housings and the wheels of mountain bikes.Informat..
|
|||
| Melt Temperature | 290 °C | 554 °F | Optimal |
|
BASF Ultramid® B35EG3 BK 00564 15% Glass Filled PA6 (Dry)
Description: 15% glass-fiber reinforced injection-molding grade for gIT applications such as, for example, steering column switches, vehicle mirror housings and the wheels of mountain bikes.Informat..
|
|||
| Melt Temperature | 290 - 310 °C | 554 - 590 °F | |
|
A. Schulman SCHULAMID® 66 GF30H 30% Glass Fiber Reinforced, Heat Stabilized Nylon 66
Information provided by A. Schulman.
|
|||
| Melt Temperature | 290 °C | 554 °F | Optimal |
|
BASF Ultramid® B3WG10 BK 00564 50% Glass Filled PA6 (Dry)
Description: 50% glass-fiber reinforced and heat aging resistant injection-molding grade for technical parts with very high stiffness.Information provided by BASF
|
|||
| Melt Temperature | 290 °C | 554 °F | DAM; Optimum; Blow Molding |
|
DuPont Performance Polymers Zytel® BM70G15HSLR BK537 Nylon 66
Zytel® BM70G15HSLR BK537 is a 15% glass fiber reinforced polyamide 66 for blow molding.Information provided by DuPont Performance Polymers
|
|||
Copyright © lookpolymers.com All Rights Reserved