- HOME
- POLYMER SEARCH
- Polymer Property : Melt Temperature = 356 °F
Polymer Property : Melt Temperature = 356 °F Product List
Processing PropertiesTips: 30 items are displayed at most.
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 180 - 220 °C | 356 - 428 °F | |
|
PolyOne OnFlex™ HT 40A-3S2131 Thermoplastic Elastomer (TPE)
OnFlex™ HT thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds is specially formulated to deliver very good compression set performance at..
|
|||
| Melt Temperature | 180 - 220 °C | 356 - 428 °F | |
|
PolyOne OnFlex™ S EH 60A-3S7003 Thermoplastic Elastomer (TPE)
OnFlex™-S EH thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are formulated to deliver a great cost/performance ratio in addition to t..
|
|||
| Melt Temperature | 180 - 210 °C | 356 - 410 °F | |
|
Premix Thermoplastics PRE-ELEC® ESD 7120
PRE-ELEC ESD 7120 is a static dissipative thermoplastic compound based on ABS. The dissipative property is permanent and built into the polymer chain. PRE-ELEC ESD 7120 has been developed for inject..
|
|||
| Melt Temperature | 180 - 210 °C | 356 - 410 °F | |
|
Premix Thermoplastics PRE-ELEC® TPE 1501 Conductive Thermoplastic Compound
PRE-ELEC® TPE 1501 is a conductive thermoplastic compound based on a thermoplastic elastomer (TPE). Conductivity is achieved by using a special conductive carbon black. In addition to a low electri..
|
|||
| Melt Temperature | 180 - 220 °C | 356 - 428 °F | |
|
Polykemi AB POLYelast TPE Z406 Thermoplastic Elastomer, SEBS-based
Information provided by Polykemi AB
|
|||
| Melt Temperature | 180 - 220 °C | 356 - 428 °F | |
|
Polykemi AB POLYelast TPE ZS506 Thermoplastic Elastomer, SEBS/SBS-based
Information provided by Polykemi AB
|
|||
| Melt Temperature | 180 - 220 °C | 356 - 428 °F | |
|
NOVA Chemicals Novapol® HB-W952-A HDPE Extrusion Resin
Molded Plaque Properties. Features: High molecular weight, excellent ESCR, impact strength, high rigidity.Applications: large-part blow-molding, trash cans, drums, jerry cans, fuel tanks.Data provi..
|
|||
| Melt Temperature | 180 - 220 °C | 356 - 428 °F | |
|
Premix Thermoplastics PRE-ELEC® CP 1315
(discontinued **)
PRE-ELEC CP 1315 is a conductive thermoplastic compound based on a polyolefin copolymer. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivit..
|
|||
| Melt Temperature | 180 - 225 °C | 356 - 437 °F | |
|
NOVA Chemicals Novapol® LE-0220-A LDPE Extrusion Resin
(discontinued **)
Features: easy processing, high melt strength.Applications: wide range of profile extrusions, tape and sheet extrusion, concentrates.Data provided by the manufacturer.
|
|||
| Melt Temperature | 180 - 210 °C | 356 - 410 °F | |
|
LATI LATAN 13 S/30 30% Glass Sphere Reinforced Polyoxymethylene Copolymer (POM)
(Unverified Data**)
Description: Latan series thermoplastics are polyoxymethylene copolymer (POM) products. The main applications for Latan feature good wear resistance, chemical inertness and low water absorption (gea..
|
|||
| Melt Temperature | 180 - 280 °C | 356 - 536 °F | Molding |
|
Ineos Styrenics Polystyrene 476M (NAFTA)
High-impact grade of polystyrene with good ESCR designed to provide uniform melt flow for excellent processability.Information provided by BASF.Ineos Styrenics purchased this product line from BASF ..
|
|||
| Melt Temperature | 180 - 220 °C | 356 - 428 °F | |
|
LATI Latene® 7H2W T-V0E PP Homopolymer, Mineral Reinforced, Heat Stabilized, Flame Retardant
Polypropylene homopolymer (PPh) based compound. Heat stabilized. Metal stabilized. Mineral filler. UL94 V-0 classified, with brominated flame retardants, PBB/PBDE free. Availability: Africa & Middle..
|
|||
| Melt Temperature | 180 - 260 °C | 356 - 500 °F | ISO 294 |
|
Styrolution PS 454N HIPS
Styrolution PS 454N is an impact resistant polystyrene with a good balance of toughness, high flow, heat resistance and high gloss.Good balance of toughness, high flow, and heat resistanceHigh gloss..
|
|||
| Melt Temperature | 180 - 230 °C | 356 - 446 °F | ISO 294 |
|
Styrolution Styrolux S SBC
Styrolux S is a new developmental, clear styrene-butadiene copolymer (SBC) designed specifically for blending with Styrolux T in order to enable high performance film extrusion and shrink film appli..
|
|||
| Melt Temperature | 180 - 250 °C | 356 - 482 °F | Injection |
|
Styrolution Styrolux® 3G46 SBC
Description: Styrolux® 3G 46 is a clear styrene-butadiene copolymer (SBC) developed specifically for sheet- and film extrusion and for thermoformed articles. Styrolux® 3G 46 is designed for im..
|
|||
| Melt Temperature | 180 - 260 °C | 356 - 500 °F | |
|
Supreme Petrochem SC 201LV General Purpose Polystyrene
CharacteristicsHigh molecular weight grade Good flow properties along with good mechanical strength Easy process ability with good mold release propertiesProcessing Injection moldingApplicationsSuit..
|
|||
| Melt Temperature | 180 - 260 °C | 356 - 500 °F | |
|
Supreme Petrochem SC 202LV General Purpose Polystyrene
CharacteristicsHigh strength grade Excellent process ability High ClarityProcessing Injection moldingApplications Ball pen barrels, geometrical instruments etc. Suitable for fast cycling products ..
|
|||
| Melt Temperature | 180 - 260 °C | 356 - 500 °F | |
|
Supreme Petrochem SC 208 General Purpose Polystyrene
CharacteristicsHigh flow grade Easy processing Good clarity & shineProcessing Extrusion MoldingApplications Hand molding applications of novelty items, toys etc. Carrier for master batches, as a ..
|
|||
| Melt Temperature | 180 - 220 °C | 356 - 428 °F | |
|
Borealis BL2571 High Density Polyethylene
BL2571 is a high-density polyethylene with high stiffness and high environmental stress crack resistance. This product is intended for blow molding. Applications: household and chemical containers..
|
|||
| Melt Temperature | 180 - 190 °C | 356 - 374 °F | |
|
Borealis Borstar® HE 6068 Natural Bimodal HDPE with very low shrinkage for Submarine and Fiber Optical Cables
Borstar® HE6068 is a natural, UV-stabilized, colorable, bimodal high density (HD) jacketing compound, which is produced with the Borealis proprietary Borstar® bimodal process technology. Borstar®..
|
|||
| Melt Temperature | 180 - 220 °C | 356 - 428 °F | |
|
Borealis RB206MO Polypropylene Random Copolymer
RB206MO is a random copolymer with good transparency and contact clarity, very good gloss and surface finish. The high stiffness of this grade allows for a reduction in cycle time. This grade also ..
|
|||
| Melt Temperature | 180 - 280 °C | 356 - 536 °F | Average value: 231 °C Grade Count:5 |
|
Overview of materials for Polystyrene, Extrusion Grade
This property data is a summary of similar materials in the MatWeb database for the category "Polystyrene, Extrusion Grade". Each property range of values reported is minimum and maximum values of a..
|
|||
| Melt Temperature | 180 - 200 °C | 356 - 392 °F | |
|
LATI Latimass 47/7-04 D008 PP Copolymer
Specific density compound based on Polypropylene copolymer (PPc). Special filler.Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati In..
|
|||
Copyright © lookpolymers.com All Rights Reserved