- HOME
- POLYMER SEARCH
- Polymer Property : Electrical Resistivity = 1.00e+15 ohm-cm
Polymer Property : Electrical Resistivity = 1.00e+15 ohm-cm Product List
Electrical PropertiesTips: 30 items are displayed at most.
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 1.00e+15 - 1.00e+16 ohm-cm | 1.00e+15 - 1.00e+16 ohm-cm | |
|
3M Dyneon™ Aflas® FA-150L PTFE Fluoroelastomer
(discontinued **)
Data provided by the manufacturer, Dyneon LLC.Non-incorporated cure polymer, 57%F in polymer with 19% Medium Thermal Carbon Black (N990), 4% Triallyl Isocyanurate (TAIC), 1% Percadox™ 14, 1% Sodium..
|
|||
| Electrical Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | |
|
Ineos ABS Lustran® QE 1120, Extrusion Grade
(discontinued **)
General purpose extrusion grade.Information provided by Bayer.LANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acquires a majority shareholding under a JV with ..
|
|||
| Electrical Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | |
|
Polimeri Europa SINKRAL B153/V4 ABS, Heat Stabilized, 17% Glass Fiber
(discontinued **)
Symbol according to ISO 1043-1-2: ABS (GF) Grade designation according to ISO 2580-ABS 1,MG,105-04-09-30,GF15 17% glass fibre reinforced injection moulding grade, with high stiffness and good proc..
|
|||
| Electrical Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | |
|
Polimeri Europa SINKRAL B260 ABS, Heat Stabilized
(discontinued **)
Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,115-04-09-25 Very high heat injection moulding grade with good impact resistance for this category of ABS. Main..
|
|||
| Electrical Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | |
|
Polimeri Europa SINKRAL C333/m² ABS, Heat Stabilized
(discontinued **)
Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,105-04-16-20 Special low gloss grade for injection moulding which combines medium heat resistance with a good b..
|
|||
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | |
|
LyondellBasell Lupolen® 2012 D SW 413 LDPE
Cable sheathingData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell.
|
|||
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | |
|
LyondellBasell Lupolen® 5031 L HDPE, Injection Molding Grade
Easy flow, injection molding grade for closures, aerosol pumps, spray nozzles for spray cans, small automotive parts such as the caps on lead/acid batteries, knobs, barrels for writing instruments a..
|
|||
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | |
|
LyondellBasell Lupolen® 5231 HX HDPE, Impact Grade
Medium flow, impact resistant, very stress-crack resistant grade for closures, bottles that contain carbonated liquids, storage and tote boxes, as well as engineering components.Data was collected b..
|
|||
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | |
|
Ineos ABS Lustran® M202AS
Grade for self coloring, optimized base color, easy flowing, contains antistatic additives. ,Property data per ISO test methods.
|
|||
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | BN Component |
|
Momentive Performance Materials FPC APC Boron Nitride (BN)/Al2O3 Water Based Coating
Solids content > 25%. Can be applied by brush, roller, dipping, or spraying. Can be applied to either hot or cold services although use of water based coatings on surfaces greater than 100°C is..
|
|||
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | |
|
LyondellBasell Lupolen® 1812 D LDPE
Insulation for cableData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell.
|
|||
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | |
|
Covestro Apec® HT KU 1-9340/5 High-Heat Polycarbonate
Transparent and opaque shades possible, easy-to-demold.Applications: Medical sector: superheated steam sterilization.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was s..
|
|||
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | |
|
Covestro Baydur® 110 FR Polyurethane
Rigid microcellular RIM polyurethane material. Fast demold times; self releasing; long flow paths possible, therefore suitable for production of large moldings. Parts are injected through only one ..
|
|||
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | |
|
Arkema Group Orgalloy® R 6600 Nylon 66 Alloy, Rigid Grade (Conditioned)
Rigid polyamide 6.6 alloy: easy to process, low moisture absorption, chemical resistance (no known solvents).ISO data provided by the manufacturer, Arkema.
|
|||
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | |
|
Arkema Group Rilsan® MB 3000 Nylon 11, Sheathing Grade (Dry)
Designation ISO 1874-PA11,MF,12-010Polyvalent rigid grade for injection molding and sheathing of cables. Available color: natural. Flame retardant agent, halogen free. Fire-resistant. Easy to be pro..
|
|||
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | |
|
BASF Luranyl® KR 2404 Polyphenylene Ether + Styrene-Butadiene Blend
Base grade with high heat deformation resistance and a balanced combination of stiffness and toughness. Uses include: steering-wheel covers and heater controls.Data was collected by ISO methods and..
|
|||
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | |
|
BASF Luranyl® KR 2452/3 Polyphenylene Ether + Styrene-Butadiene Blend
This grade, which contains a halogen-free flame-retardant, is especially resistant to heat deformation. Applications include: functional electrical parts (e.g. switches, transformer housings, defle..
|
|||
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | |
|
BASF Novolen® 3520 L Polypropylene
Grade containing antiblocking agent; sealing layer for OPP film.Data was collected by ISO methods and provided by BASF.
|
|||
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | |
|
BASF Luranyl® KR 2460/3 Polyphenylene Ether + Styrene-Butadiene Blend
Flame retardant grade with very high heat resistance; used for precision parts and where the material must withstand high injection temperatures (e.g. heater-fan impellers).Data was collected by ISO..
|
|||
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | |
|
BASF Novolen® 1102 M Polypropylene
Data was collected by ISO methods and provided by BASF.
|
|||
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | ISO data |
|
BASF Capron® GR15 15% Glass-Filled Nylon 6 (Dry)
(discontinued **)
Capron GR15 is a 15% glass reinforced polyamide 6 injection molding compound possessing a balance of engineering properties combined with excellent processability and surface aesthetics. It is also..
|
|||
| Electrical Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | ASTM D257 |
|
PolyOne Edgetek® NI-30GF/000 Nylon 6/10 - 30% Glass Fiber Reinforced
(discontinued **)
Data provided by PolyOne.
|
|||
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | |
|
BASF Novolen® 1101 N Polypropylene
Data was collected by ISO methods and provided by BASF.
|
|||
| Electrical Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | |
|
Arkema Group Oroglas® SG 10 Acrylic, Gamma Radiation Resistant
(discontinued **)
OROGLAS SG 10 is special Gamma - radiation - resistant formulation designed for use in medical devises.OROGLAS SG 10 maintains exceptional clarity after 5 megarads of Gamma radiation with no advers..
|
|||
| Electrical Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | |
|
Polimeri Europa SINKRAL L320 ABS
(discontinued **)
Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,095-25-16-25 General purpose, high flow injection moulding grade having good impact resistance coupled with an ..
|
|||
| Electrical Resistivity | 1.00e+15 - 1.00e+16 ohm-cm | 1.00e+15 - 1.00e+16 ohm-cm | |
|
3M Dyneon™ Aflas® FA-100S PTFE Fluoroelastomer
(discontinued **)
Data provided by the manufacturer, Dyneon LLC.Non-incorporated cure polymer, 57%F in polymer with 19% Medium Thermal Carbon Black (N990), 4% Triallyl Isocyanurate (TAIC), 1% Percadox™ 14, 1% Sodium..
|
|||
Copyright © lookpolymers.com All Rights Reserved