| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Comparative Tracking Index | 575 V | 575 V | IEC 60112 |
|
SABIC Innovative Plastics Cycolac® G366 ABS (Europe-Africa-Middle East)
CYCOLAC G366 is a "new technology" grade of ABS exhibiting outstanding property balance, a good flow, medium impact, medium to high heat resistant and an excellent stability during injection mouldin..
|
|||
| Comparative Tracking Index | 575 V | 575 V | IEC 60112 |
|
SABIC Innovative Plastics Cycoloy® CY6310 PC+ABS
Flame retardant PC/ABS blend using non-brominated and non-chlorinated flame retardant systems, offering hydrolytic stability and excellent flow / impact balance for a wide variety of thin wall or la..
|
|||
| Comparative Tracking Index | >= 575 V | >= 575 V | CTI; IEC 60112 |
|
Raschig Group 6501 DAIP
Glass-fiber reinforced diallyl isophthalate molding compound. Good mechanical strength together with retention of high electrical isolation properties under hot humid conditions, exceptional dimensi..
|
|||
| Comparative Tracking Index | 575 V | 575 V | STN 34 6468 |
|
Plastcom SLOVAMID 6 GF 30 Polyamide 6, 30% Glass Fiber
FeaturesPA 6 for injection moulding, chemically strengthened with 30% of glass fiber, for mouldings with high strength and toughness used in the automotive, electrical, engineering and consumer-good..
|
|||
| Comparative Tracking Index | 575 V | 575 V | CTI 100; IEC 112 |
|
Nilit FRIANYL B63 GV10 Nylon 6 for injection molding, 10% glass fiber reinforced
Nylon 6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics
|
|||
| Comparative Tracking Index | 575 V | 575 V | CTI 100; IEC 112 |
|
Nilit FRIANYL B63 W-KV10 Nylon 6 for injection molding, 10% glass ball reinforced
Nylon 6 for injection molding, heat stabilized.Information provided by Frisetta Polymer, which merged into Nilit Plastics
|
|||
| Comparative Tracking Index | 575 V | 575 V | IEC 60112 |
|
Lanxess Durethan® BKV 130 000000 Copolyamide, 30% Glass Fiber
CoPA, injection molding grade, 30% glass fibers, elastomer modified, electroplateable, higher notched impact strength and also higher energy absorption under biaxial impact load than BKV 30, even in..
|
|||
| Comparative Tracking Index | 575 V | 575 V | A solution |
|
LATI Latamid 6 H2 G/30-V2HF PA 6, 30% Glass Fiber Reinforced, Heat Stabilized, Flame Retardant
Polyamide 6 (PA6) based compound. Heat stabilized. Glass fibers. UL94 V-2 classified, halogens-based flame retardants and red phosphorous freeAvailability: Africa & Middle East; Asia Pacific; Europe..
|
|||
| Comparative Tracking Index | 575 V | 575 V | Solution A; IEC 60112 |
|
Solvay TECHNYL® A 222 Black 1N PA66, DRY
Description: Unreinforced polyamide PA66, medium viscosity, heat stabilized, for injection molding, fast crystallization, for short cycles .Available in: EuropeProduct Applications: TECHNYL A 222 of..
|
|||
| Comparative Tracking Index | 575 V | 575 V | Solution A; IEC 60112 |
|
Solvay TECHNYL® A 402H1 Natural PA66, Conditioned
Description: TECHNYL® A 402H1 is an unreinforced polyamide 66, very high viscosity, heat stabilized, for extrusion and injection molding. This product is available in natural color.Benefits: The ..
|
|||
| Comparative Tracking Index | 575 V | 575 V | Solution B; IEC 60112 |
|
Solvay TECHNYL® B 50 H1 PA66/6, DRY
Description: TECHNYL® B 50H1 is an unreinforced melamine cyanurate flame retarded copolyamide 66/6. This product has been heat stabilized and is suitable for injection molding. This product is av..
|
|||
| Comparative Tracking Index | 575 V | 575 V | GB4207 |
|
Zhejiang Juner PA-A6-4 Non-Reinforced
Applications: Shell of Middle & Top Grade MCB, Pedestal & Shell of Low Voltage Electrical ApplianceInformation provided by Zhejiang Juner New Materials Co, Ltd.
|
|||
| Comparative Tracking Index | 575 V | 575 V | IEC Method |
|
Toyobo GLAMIDE® T-663G15 Nylon-66
GLAMIDE® is very tough and exhibits high abrasion resistance. It has a high melting point and heat resistance, has well-balanced proportions of mechanical properties, performs self-distinguishing a..
|
|||
| Comparative Tracking Index | 575 V | 575 V | IEC Method |
|
Toyobo GLAMIDE® TY-181GC Nylon/Elastomer
GLAMIDE® is very tough and exhibits high abrasion resistance. It has a high melting point and heat resistance, has well-balanced proportions of mechanical properties, performs self-distinguishing a..
|
|||
| Comparative Tracking Index | 575 V | 575 V | conditioned; IEC 60112 |
|
EMS-Grivory Grivory® GV-2 FWA nat PA*-GF20
Product description: Grivory GV-2 FWA natural is a 20% glass fiber reinforced engineering thermoplastic material based on a combination of semicrystalline polyamide with partially aromatic copolyami..
|
|||
| Comparative Tracking Index | 575 V | 575 V | conditioned; IEC 60112 |
|
EMS-Grivory Grivory® HT2V-3H LF PA*-GF30
Grivory TH2V-3H LF is a glass fiber reinforced (30%), PTFE modified engineering thermoplastic based on semi-crystalline partially aromatic copolyamide. Polymer designation acc. ISO: PA6T/66 Polymer ..
|
|||
| Comparative Tracking Index | 575 V | 575 V | conditioned; IEC 60112 |
|
EMS-Grivory Grivory® HT2VZ-15H PA6T/66-GF15
Information provided by EMS Grivory
|
|||
| Comparative Tracking Index | 575 V | 575 V | conditioned; IEC 60112 |
|
EMS-Grivory Grivory® HTV-3H1 black 9205 PA6T/6I-GF30
Product description: Grivory HTV-3H1 black 9205 is a 30% glass fiber reinforced engineering thermoplastic material based on a semi-crystalline, partially aromatic copolyamide. Acc. to ISO: PA 6T/6I...
|
|||
| Comparative Tracking Index | 575 V | 575 V | conditioned; IEC 60112 |
|
EMS-Grivory Grivory® HTV-3H1 nat PA6T/6I-GF30
Product description: Grivory HTV-3H1 natural is a 30% glass fiber reinforced engineering thermoplastic material based on a semi-crystalline, partially aromatic copolyamide. Acc. to ISO: PA 6T/6I. Ac..
|
|||
| Comparative Tracking Index | 575 V | 575 V | IEC 60112 |
|
Eurostar Staramide BG2ST43 PA6, Glass Fiber Filled, Impact Modified, Injection Molded
Staramide BG2ST43 is an Impact Modified and Glass Fiber Reinforced, Polyamide 6, Injection Molding ResinInformation provided by Eurostar.
|
|||
| Comparative Tracking Index | 575 V | 575 V | Solution A; IEC 60112 |
|
Eurotec® Tecodur® PB70 GR30 NL XA60 PBT, 30% glass fiber reinforced, flame retardant - halogen & red phosphorus, heat stabilized, natural
Information provided by Eurotec®
|
|||
| Comparative Tracking Index | 575 V | 575 V | |
|
BASF Polystyrol® 585 K Impact Grade Polystyrene (Europe)
Special high gloss, high-impact grade for all types of housings. Basis product for gloss capping.Data was collected by ISO methods and provided by BASF.
|
|||
| Comparative Tracking Index | 575 V | 575 V | Test Solution A; IEC 60112 |
|
BASF Ultramid® B3EG6 BK00564 30% Glass Filled PA6 (Conditioned)
Ultramid B3EG6 BK00564 is a 30% glass fiber reinforced, pigmented black injection molding PA6 grade. It conforms to FDA requirements of 21 CFR 177.1500.
|
|||
| Comparative Tracking Index | 575 V | 575 V | Test Solution A; IEC 60112 |
|
BASF Ultramid® B3EG7 BK 00564 35% Glass Filled PA6 (Dry)
Description: 35% Glass fiber reinforced injection molding grade for industrial articles and electrical insulating parts.Information provided by BASF
|
|||
| Comparative Tracking Index | 575 V | 575 V | Test solution A; IEC 60112 |
|
BASF Ultramid® B3EG5 25% Glass Filled PA6 (Conditioned)
Description: 25% glass-fiber reinforced injection-molding grade for industrial articles and electrical insulating partsInformation provided by BASF
|
|||
| Comparative Tracking Index | 575 V | 575 V | conditioned; IEC 60112 |
|
EMS-Grivory Grivory® TS V0 X PA666 FR
Product description: Grilon XE 5030 is a heat stabilized, flame retardant and self-extinguishing injection molding grade on the basis of PA6-PA66-alloy. Grilon XE 5030 features the following main pr..
|
|||
| Comparative Tracking Index | 575 V | 575 V | IEC 112 |
|
LG Chemical HF-380 ABS, High Flow, High Impact
Feature: Injection Molding, High FlowApplication: Electric & Electronic Products, Toys, Miscellaneous Goods)CAS No. 9003-56-9Information Provided by LG Chem
|
|||