Polymer Property : Hot Wire Ignition, HWI = 15 sec Product List

Electrical Properties

Tips: 30 items are displayed at most.

Electrical Properties	Metric	English	Comments
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Cycolac® FR15 ABS Flame retardant ABS (non-PBBE additive). Good property/toughness. Excellent moldability. UL94 V-0/5VA rated.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	PLC code 3; UL 746A
SABIC Innovative Plastics Cycolac® MG37CR ABS (Asia Pacific) High performance, injection molding ABS. Overall balance of physical properties, good processability and chemical resistance.This data was supplied by SABIC-IP for the Asia Pacific region.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Cycolac® MG38 ABS Very high impact ABS. Toughness/rigidity. Good fatigue resistance.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Cycolac® MGABS01 ABS Injection molding ABS. High impact, high gloss, good flow.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Cycoloy® C1200HF PC+ABS (Asia Pacific) PC+ABS, excellent flow/impact/high heat resistance. Low temperature ductility. For automotive, appliance and electrical components.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Cycoloy® CY6310 PC+ABS (Europe-Africa-Middle East) Flame retardant PC/ABS blend using non-brominated and non-chlorinated flame retardant systems, offering hydrolytic stability and excellent flow / impact balance for a wide variety of thin wall or la..
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics GELOY CR7020 ASA (Asia Pacific) ASA copolymer. Profile/sheet coextrusion over ABS. Excellent weatherability, good flow/aesthetics and high impact.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	PLC code 3; UL 746A
SABIC Innovative Plastics Lexan® 945ASR PC Lexan* 945ASR Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating and is available in transparent and t..
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	PLC code 3; UL 746A
SABIC Innovative Plastics Lexan® 945ASR PC (Asia Pacific) Lexan* 945ASR Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating and is available in transparent and t..
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Lexan® XHT2141 PC Copolymer XHT2141 is a high flow, high heat polycarbonate copolymer. It is available in a range of opaque and limited transparent colors.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Lexan® XHT2141 PC Copolymer (Asia Pacific) XHT2141 is a high flow, high heat polycarbonate copolymer. It is available in a range of opaque and limited transparent colors.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Lexan® XHT3141 PC Copolymer (Asia Pacific) XHT3141 is a high flow, high heat polycarbonate copolymer. It is available in a range of opaque and limited transparent colors.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Lexan® XHT4141 PC Copolymer XHT4141 is a high flow, high heat polycarbonate copolymer. It is available in a range of opaque and limited transparent colors.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Cycoloy® C1110HF PC+ABS High impact and ductility at 73F and -20F. For thin-wall applications.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Cycoloy® C1110HF PC+ABS (Asia Pacific) PC+ABS, excellent flow/impact/high heat resistance. Suitable for thin wall application. Low temperature ductility (-20F). For automotive, appliance and electrical components.
Hot Wire Ignition, HWI	15 - 30 sec @Thickness >=0.750 mm	15 - 30 sec @Thickness >=0.0295 in
LG Chemical LUMID GP2200A(W) PA6+GF20%, General Purpose Feature: Injection Molding, PA6+MF23%, High ImpactPA6+GF20%, General PurposeApplication: HMID, SLMP B, HolderCAS No. 32131-17-2 and 65997-17-3Information provided by LG Chemical
Hot Wire Ignition, HWI	15 - 30 sec @Thickness >=0.750 mm	15 - 30 sec @Thickness >=0.0295 in
LG Chemical LUMID GP2300A(W) PA6+GF30%, General Purpose Feature: Injection Molding, PA6+GF30%, General PurposeApplication: Automotive (Side Mirror Base Plate)CAS No. 25038-54-4 and 65997-17-3Information provided by LG Chemical
Hot Wire Ignition, HWI	15 - 30 sec @Thickness >=3.00 mm	15 - 30 sec @Thickness >=0.118 in
LG Chemical LUSEP SP2300 SPS+GF30%, General Purpose Feature: Injection Molding, sPS+GF30%, General PurposeApplication: Pump Units, Pick-up Lends Holder, etc.CAS No. 9003-53-6 and 65997-17-3Information provided by LG Chemical
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics NORYL SPN420 PPE+PS Superior Productivity plus heat and impact resistance. Excellent processability.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics ValoxÂ® 325 PBT General purpose, unreinforced, improved processing. Applications like sprinklers and nozzles, pumps, door handle, tank covers, pens, pencils etc.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics ValoxÂ® DR48 PBT 17% glass reinforced, flame retardant grade UL-94 rated V-0/5VA.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics XenoyÂ® 5220U PBT+PC (Asia Pacific) Unreinforced PBT+PC Alloy. Impact Modified. Improved retention of mechanical properties under UV exposure. Excellent low temperature impact and chemical resistance.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics XenoyÂ® 6620 PBT+PC PBT+PC, Unreinforced, impact modified thermoplastic alloy. Outstanding impact at low temperature
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics XenoyÂ® 6620U PBT+PC PBT+PC, Unfilled, Impact Modified, UV stabilized. Outstanding low temperature impact performance and chemical resistance.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics NORYL PX1543 PPE+PS
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics ValoxÂ® SHF4960 PBT (Europe-Africa-Middle East) Valox Super high flow grade, 30% glass filled Flame retardant, High CTI, heat stabilized with mold release.
Hot Wire Ignition, HWI	15 - 30 sec @Thickness 3.00 mm	15 - 30 sec @Thickness 0.118 in	UL Rating PLC 3 (15-30 sec)
Covestro Makrolon® 2407 Polycarbonate, Injection Grade Very easy flowing injection molding grade with easy mold release and UV stabilizer.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officia..
Hot Wire Ignition, HWI	15 - 30 sec @Thickness 0.800 mm	15 - 30 sec @Thickness 0.0315 in	PLC 3
Eurostar Starflam R10002E PA66/6, Injection Molded Starflam R10002E is a Unfilled, Halogen Free and Red Phosphorous Free, Flame Retardant, Polyamide 66/Polyamide 6 Injection Molding Resin (also known as R1000Z220EM)Information provided by Polymer Te..
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics NORYL FP6130 PPE+PS Noryl* FP6130 is an unfilled, injection moldable modified polyphenylene ether resin. Designed for good dimensional stability and high flow , this resin also uses non-chlorinated, non-brominated FR a..
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL Rating PLC 3 (15-30 sec)
LG Chemical 15NFI GPPS High flow, Superior transparency and processability, good appearance, non-toxicity (Conforming to FDA CFR 177.1640), Excellent electrical properties, Heat resistance and chemical resistance, Superio..