Polymer Property : Dielectric Strength = 12.0 kV/mm Product List

Electrical Properties

Tips: 30 items are displayed at most.

Electrical Properties	Metric	English	Comments
Dielectric Strength	12.0 kV/mm	305 kV/in	ASTM D149
Protective Coating PC-Crete™ Epoxy Putty PC-PUTTIES™ are hand moldable epoxy putty that are especially designed for emergency type repairs where time is of the essence.Data provided by the manufacturer.
Dielectric Strength	12.0 kV/mm	305 kV/in	ASTM D149
Protective Coating PC-Lumber™ Epoxy Putty PC-PUTTIES™ are hand moldable epoxy putty that are especially designed for emergency type repairs where time is of the essence.Data provided by the manufacturer.
Dielectric Strength	12.0 kV/mm	305 kV/in	ASTM D149
Protective Coating PC-Marine™ Epoxy Putty PC-PUTTIES™ are hand moldable epoxy putty that are especially designed for emergency type repairs where time is of the essence.Data provided by the manufacturer.
Dielectric Strength	12.0 kV/mm	305 kV/in	ASTM D149
Quantum Composites QC-8800 63% Glass Fiber Vinyl Ester SMC QC-8800 is a vinyl ester-based sheet molding compound (SMC) designed for compression molding of components requiring high structural strength. It exhibits unusual toughness, and is suggested for ap..
Dielectric Strength	12.0 kV/mm	305 kV/in
Permabond UV610 UV-curable Adhesive PERMABOND UV610 is a single part, fast setting, UV curable adhesive designed specifically for bonding glass and metal. Its high strength makes it suitable for a wide range of applications including ..
Dielectric Strength	12.0 kV/mm	305 kV/in
Permabond UV645 UV-curable Adhesive PERMABOND UV645 is a single part, fast curing, high viscosity UV curable adhesive designed specifically for bonding plastics. This material has excellent adhesion to a variety of plastics including ..
Dielectric Strength	12.0 kV/mm	305 kV/in
Permabond UV648 UV-curable Adhesive PERMABOND UV648 is a UV-curing adhesive developed for use on plastics. It has good adhesion to acrylic and contains a long-wavelength photo initiator to allow it to cure through UV-stabilized plasti..
Dielectric Strength	12.0 kV/mm	305 kV/in
Permabond UV649 UV-curable Adhesive PERMABOND UV649 is a single part, fast setting, and UV curable adhesive designed specifically for bonding plastics. This material has excellent adhesion to a variety of plastics including polycarbon..
Dielectric Strength	12.0 kV/mm	305 kV/in
Permabond UV670 UV-curable Adhesive PERMABOND UV670 is a single part, fast curing, UV curable adhesive. The cured adhesive is tough, flexible and has excellent impact resistance. Permabond UV670 is well suited for bonding glass to met..
Dielectric Strength	12.0 kV/mm	305 kV/in	60Â°C for 500 hrs with 95% RH
Fujipoly Industries SarconÂ® 45Q Thin-Film QR Sarcon QR is Fujipolys originally developed High Heat Conductive/Low Hardness Silicone Rubber. Fine, high heat conductive ceramic particles are mixed with insulative silicone rubber.Information prov..
Dielectric Strength	12.0 kV/mm	305 kV/in	Perpendicular S/T in Air; ASTM D-149
Glastic GLASTHERM HT250 Insulation Sheet Glastherm Grade HT250 is a high compressive strength, heat-resistant composite material. It is ideal for insulation between the fold and the press or within the mold itself. Grade HT250 is asbesto..
Dielectric Strength	12.0 kV/mm <br>@Thickness 3.20 mm	305 kV/in <br>@Thickness 0.126 in	in oil; ASTM D149
SABIC Innovative Plastics ValoxÂ® 365 PC+PET Unreinforced, opaque, provides chemical resistance and dimensional stability, UL94V-0 rated at 0.031"".
Dielectric Strength	12.0 kV/mm <br>@Thickness 3.20 mm	305 kV/in <br>@Thickness 0.126 in	in oil; ASTM D149
SABIC Innovative Plastics ValoxÂ® 365 PET (Asia Pacific) Unreinforced, opaque, provides chemical resistance and dimensional stability, UL94V-0 rated at 0.031"".
Dielectric Strength	12.0 kV/mm <br>@Thickness 3.20 mm	305 kV/in <br>@Thickness 0.126 in	in oil; ASTM D 149
SABIC Innovative Plastics ValoxÂ® 365 PET Unreinforced, opaque, provides chemical resistance and dimensional stability, UL94V-0 rated at 0.031".This data was supplied by SABIC-IP for the Americas region.
Dielectric Strength	12.0 kV/mm	305 kV/in	Wet, short term. ASTM D149
Sumitomo Bakelite North America 2008A Glass Reinforced Hardware Grade Epoxy Epoxy is the premier material for military firewall connectors.Information provided by Sumitomo Bak North America, Inc.
Dielectric Strength	12.0 kV/mm	305 kV/in	Short Time; ASTM D149
Plenco 00755 Melamine-Phenolic, Granular, Compression Molded PLENCO 00755 is a melamine-phenolic copolymer molding compound offering excellent electrical and flame resistant properties. Type ASTM 5948 CMG, and UL recognized under component file E40654. 00755..
Dielectric Strength	12.0 kV/mm	305 kV/in
Von Roll Isola IMI Varnish 73538 Solventless Polyester Varnish for Electrical Insulation Data provided by Von Roll Isola USA.IMI solventless resins provide relatively void-free insulation for greater protection against severe environments and corona breakdown. Flash Point: 30°C. Usag..
Dielectric Strength	12.0 kV/mm	305 kV/in	Short Time; ASTM D149
Plenco 4300 Phenolic, Granular, Transfer Molded PLENCO 04300 is a heat resistant, mineral filled phenolic molding compound offering optimum cure characteristics and excellent dimensional stability. It is formulated for wiring devices and electric..
Dielectric Strength	12.0 kV/mm <br>@Thickness 1.00 mm	305 kV/in <br>@Thickness 0.0394 in	IEC 60243
Ascend Performance Materials Vydyne® 47H BK0501 Nylon 66, Impact Modified, DAM Vydyne® 47H BK0501 is general-purpose, impact-modified PA66 resin. Available in black, it is heat-stabilized for improved resistance to elevated temperatures. The heat stabilization package for Vyd..
Dielectric Strength	12.0 kV/mm <br>@Thickness 1.00 mm	305 kV/in <br>@Thickness 0.0394 in	IEC 60243
Ascend Performance Materials Vydyne® 47H Nylon 66, Impact Modified, DAM Vydyne® 47H is general-purpose, impact-modified PA66 resin. Available in natural, it is heat-stabilized for improved resistance to elevated temperatures. The heat stabilization package for Vydyne 4..
Dielectric Strength	12.0 - 20.0 kV/mm	305 - 508 kV/in	ASTM D149
Adamas Adalon® 463 PTFE, 15% Special Polyimide Information provided by Adamas, HPM
Dielectric Strength	12.0 kV/mm <br>@Thickness 1.00 mm	305 kV/in <br>@Thickness 0.0394 in	IEC 60243
Ascend Performance Materials Vydyne® 47 BK11 Nylon 66, Impact Modified, DAM Vydyne® 47H BK11 is a general-purpose, impact-modified PA66 resin. Available in black, it is heat-stabilized for improved resistance to elevated temperatures. The heat stabilization package for Vyd..
Dielectric Strength	12.0 kV/mm <br>@Thickness 1.00 mm	305 kV/in <br>@Thickness 0.0394 in	IEC 60243
Ascend Performance Materials Vydyne® 47H BK0644 Nylon 66, Impact Modified, DAM Vydyne® 47H BK0644 is a high-performance, medium-impact-modified, heat-stabilized PA66 resin with excellent UV stability and outstanding processing characteristics. This product has an UL746C f1 ra..
Dielectric Strength	12.0 kV/mm	305 kV/in	ASTM D149
Protective Coating PC-Metal™ Epoxy Putty PC-PUTTIES™ are hand moldable epoxy putty that are especially designed for emergency type repairs where time is of the essence.Data provided by the manufacturer.
Dielectric Strength	12.0 kV/mm <br>@Thickness 3.00 mm	305 kV/in <br>@Thickness 0.118 in	step by step; IEC 60243
Ascend Performance Materials Vydyne® 22WSP Nylon 66, Weather Resistant, DAM Vydyne® 25WSP is a black, weather resistant injection molding grade Nylon 66 resin. These resins offer a well-balanced combination of engineering properties characterized by high strength, rigidity..
Dielectric Strength	12.0 kV/mm	305 kV/in	Short Time; ASTM D149
Plenco 7579 Phenolic, Granular, Compression Molded PLENCO 07579 is a fast curing, woodflour filled, novolac phenolic molding compound, formulated for industrial applications that do not require a smooth finish. UL recognized under component file E40..
Dielectric Strength	12.0 kV/mm <br>@Thickness 1.60 mm	305 kV/in <br>@Thickness 0.0630 in	in oil; ASTM D149
SABIC Innovative Plastics NORYL FN215X PPE+PS Structural foam resin. 170F (77C) HDT. Improved reliability and productivity. All values at 20% weight reduction.
Dielectric Strength	12.0 - 24.0 kV/mm <br>@Temperature 95.0 - 200 °C	305 - 610 kV/in <br>@Temperature 203 - 392 °F	Average value: 18.9 kV/mm Grade Count:2
Overview of materials for Polyethylene Terephthalate (PET), 30% Glass Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Polyethylene Terephthalate (PET), 30% Glass Reinforced". Specific grades with glass content between 25% ..
Dielectric Strength	12.0 kV/mm	305 kV/in	ST; ASTM D149
Sumitomo Bakelite North America FM 4004 Fiberglass and Mineral Reinforced Phenolic Novolac FM 4004 is a fiberglass and mineral reinforced phenolic novolac compound. This compound exhibits excellent dimensional stability and good strength at elevated temperatures, and conforms to the requ..